[Sun May 27 10:32:06 2012] Detection parameters:
  Position = (279.6, 283.9) = 22 17 55.41 -8 21 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66289.1 +/- 308.5
  Background counts = 993.7
  Rate = 3 +/- 0.01

[Sun May 27 10:32:07 2012] Off-axis axis estimate = 1.73'
[Sun May 27 10:42:05 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun May 27 10:42:05 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun May 27 10:42:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun May 27 10:42:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 11:02:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src1.csv
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 11:02:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src1.csv
[Sun May 27 11:02:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 11:02:21 2012] Fit fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 11:31:30 2012] Spatial fit model total counts = 65726.300000, observed total counts = 65543.000000
[Sun May 27 11:31:30 2012] Offset between fit and detection position for source 1 = 0.076155 pixels
[Sun May 27 11:31:30 2012] 65810.900000 total counts/ 21177.200000 bgd. counts: snr = 306.710484
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.076155 pixels
  Position = (279.6, 283.8) = 22 17 55.41 -8 21 3.7
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 44633.7 +/- 256.5
  Background counts = 21177.2
  Rate = 1 +/- 0.008
[Sun May 27 11:31:30 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:31:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:31:30 2012] Assessing source extent using major axis lower bound
[Sun May 27 11:31:30 2012] Source does appear to be extended
[Sun May 27 11:31:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:31:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 11:31:45 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Sun May 27 11:31:45 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.923
[Sun May 27 11:31:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.67"
[Sun May 27 11:47:07 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 11:47:07 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_src1.csv
[Sun May 27 11:47:07 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 11:47:07 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_src1.csv
[Sun May 27 11:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:47:07 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 11:47:07 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 11:47:07 2012] Fit fullrun_pn_xmm0009650201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 12:12:14 2012] Spatial fit model total counts = 65734.800000, observed total counts = 65543.000000
[Sun May 27 12:12:14 2012] Offset between fit and detection position for source 1 = 0.000060 pixels
[Sun May 27 12:12:14 2012] 65818.700000 total counts/ 21176.000000 bgd. counts: snr = 306.781021
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000060 pixels
  Position = (279.6, 283.8) = 22 17 55.41 -8 21 3.7
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 44642.7 +/- 256.6
  Background counts = 21176.0
  Rate = 1 +/- 0.008
[Sun May 27 12:12:14 2012] Vigneting correction estimate = 1.000000
[Sun May 27 12:12:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 12:12:14 2012] Assessing source extent using major axis lower bound
[Sun May 27 12:12:14 2012] Source does appear to be extended
[Sun May 27 12:12:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:12:23 2012] Counts = 44642.700000, rescaling region sizes by 3.000000
[Sun May 27 12:12:23 2012] XMMSAS src. selection expression = ellipse(24279.869800, 24642.283800, 1019.725229, 1019.725229, 0.000000, X, Y)
[Sun May 27 12:12:23 2012] Writing source region out to fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1_src.reg
[Sun May 27 12:12:23 2012] Extracting stamp from image fullrun_pn_xmm0009650201_pi300-10000_cl_sm2.00.img.gz, (221, 225) - (338, 342)
[Sun May 27 12:12:23 2012] XMMSAS bgd. selection expression = annulus(24279.869800, 24642.283800, 5098.626147, 10197.252293, X, Y) && !ellipse(26430.651459, 28293.616486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24536.773926, 26133.285522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.744965, 25424.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22419.147600, 24897.362000, 1278.624037, 1278.624037, 0.000000, X, Y) && !ellipse(21688.754532, 25170.829437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23249.288000, 24547.614000, 1253.904036, 1253.904036, 0.000000, X, Y) && !ellipse(25905.024689, 23809.293243, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 12:12:23 2012] Writing fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1.gif
[Sun May 27 12:17:23 2012] Mean detx,y = (85.92, -235.66) 
[Sun May 27 12:17:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 12:19:18 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 12:19:18 2012] Setting source spectrum file to fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 12:19:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 27 15:27:43 2012] Updating aperture counts using extracted products
[Sun May 27 15:27:43 2012] Error reading totcts from fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 15:27:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 15:27:44 2012] Using photon index=1.80, rate=1.31, arf fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1.arf
[Sun May 27 15:27:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 15:27:44 2012] Updating source flux to 3.2e-12
[Sun May 27 15:29:31 2012] Reading fit data from xmm0009650201/analysis//spectral/fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1_pl.csv
[Sun May 27 15:29:31 2012] Spectral fit parameter nH value = 1.01118e+12
[Sun May 27 15:29:31 2012] Spectral fit parameter PhoIndex value = -0.663476
[Sun May 27 15:29:31 2012] Failed to get F(0.3-8.0) from xmm0009650201/analysis//spectral/fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun May 27 15:29:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 15:29:31 2012] Using Nh = 1e+12, photon index=-0.66, rate=1.31, arf fullrun_pn_xmm0009650201_pi300-10000_pass1_cl_src1.arf
[Sun May 27 15:29:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 15:29:31 2012] Updating source flux to 1.1e-11