[Sun May 27 10:32:24 2012] Detection parameters:
  Position = (279.6, 283.9) = 22 17 55.41 -8 21 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21624.8 +/- 174.7
  Background counts = 94.2
  Rate = 0.6 +/- 0.005

[Sun May 27 10:32:24 2012] Off-axis axis estimate = 1.72'
[Sun May 27 11:02:21 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:02:21 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun May 27 11:02:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun May 27 11:02:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun May 27 11:15:30 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 11:15:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_src1.csv
[Sun May 27 11:15:30 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 11:15:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_src1.csv
[Sun May 27 11:15:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:15:30 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 11:15:30 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 11:15:30 2012] Fit fullrun_mos1_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 11:31:33 2012] Spatial fit model total counts = 15838.600000, observed total counts = 15763.000000
[Sun May 27 11:31:33 2012] Offset between fit and detection position for source 1 = 0.024595 pixels
[Sun May 27 11:31:33 2012] 15833.040000 total counts/ 3534.940000 bgd. counts: snr = 206.845938
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024595 pixels
  Position = (279.6, 283.9) = 22 17 55.41 -8 21 3.2
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 12298.1 +/- 125.8
  Background counts = 3534.9
  Rate = 0.6 +/- 0.006
[Sun May 27 11:31:33 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:31:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:31:33 2012] Assessing source extent using major axis lower bound
[Sun May 27 11:31:33 2012] Source does appear to be extended
[Sun May 27 11:31:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:47:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 11:47:07 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Sun May 27 11:47:07 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Sun May 27 11:47:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Sun May 27 11:59:10 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 11:59:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_src1.csv
[Sun May 27 11:59:10 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 11:59:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_src1.csv
[Sun May 27 11:59:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:59:10 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 11:59:10 2012] fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 11:59:10 2012] Fit fullrun_mos1_xmm0009650201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 12:12:16 2012] Spatial fit model total counts = 15884.000000, observed total counts = 15747.000000
[Sun May 27 12:12:16 2012] Offset between fit and detection position for source 1 = 0.010391 pixels
[Sun May 27 12:12:16 2012] 15926.500000 total counts/ 3595.300000 bgd. counts: snr = 205.654290
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010391 pixels
  Position = (279.6, 283.9) = 22 17 55.41 -8 21 3.2
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 12331.2 +/- 126.2
  Background counts = 3595.3
  Rate = 0.6 +/- 0.006
[Sun May 27 12:12:16 2012] Vigneting correction estimate = 1.000000
[Sun May 27 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 12:12:16 2012] Assessing source extent using major axis lower bound
[Sun May 27 12:12:16 2012] Source does appear to be extended
[Sun May 27 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 14:33:36 2012] Counts = 12331.200000, rescaling region sizes by 3.000000
[Sun May 27 14:33:36 2012] XMMSAS src. selection expression = ellipse(24279.823800, 24650.600140, 965.876428, 965.876428, 0.000000, X, Y)
[Sun May 27 14:33:36 2012] Writing source region out to fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1_src.reg
[Sun May 27 14:33:36 2012] Extracting stamp from image fullrun_mos1_xmm0009650201_pi300-10000_cl_sm2.00.img.gz, (224, 228) - (335, 339)
[Sun May 27 14:33:36 2012] XMMSAS bgd. selection expression = annulus(24279.823800, 24650.600140, 4829.382139, 9658.764278, X, Y) && !ellipse(16404.724520, 33707.561200, 493.060014, 493.060014, 0.000000, X, Y) && !ellipse(21076.818000, 18519.698800, 509.243758, 509.243758, 0.000000, X, Y) && !ellipse(34097.592200, 25587.087600, 576.792817, 576.792817, 0.000000, X, Y)
[Sun May 27 14:33:36 2012] Writing fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1.gif
[Sun May 27 14:33:40 2012] Mean detx,y = (314.99, -229.60) 
[Sun May 27 14:33:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 14:35:50 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 14:35:51 2012] Setting source spectrum file to fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 14:35:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 27 15:27:44 2012] Updating aperture counts using extracted products
[Sun May 27 15:27:44 2012] Error reading totcts from fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 15:27:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 15:27:44 2012] Using photon index=1.80, rate=0.561, arf fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1.arf
[Sun May 27 15:27:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 15:27:44 2012] Updating source flux to 5.3e-12
[Sun May 27 15:28:44 2012] Reading fit data from xmm0009650201/analysis//spectral/fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1_pl.csv
[Sun May 27 15:28:44 2012] Spectral fit parameter nH value = 9.90225e+22
[Sun May 27 15:28:44 2012] Spectral fit parameter PhoIndex value = 0.900143
[Sun May 27 15:28:44 2012] Failed to get F(0.3-8.0) from xmm0009650201/analysis//spectral/fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun May 27 15:28:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 15:28:44 2012] Using Nh = 9.9e+22, photon index=0.90, rate=0.561, arf fullrun_mos1_xmm0009650201_pi300-10000_pass1_cl_src1.arf
[Sun May 27 15:28:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 15:28:44 2012] Updating source flux to 1.9e-11