[Fri Sep 23 01:13:32 2011] Detection parameters:
  Position = (288.1, 276.2) = 6 15 36.38 71 2 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1694.7 +/- 49.4
  Background counts = 10.7
  Rate = 0.2 +/- 0.007

[Fri Sep 23 01:13:33 2011] Off-axis axis estimate = 1.78'
[Fri Sep 23 01:20:16 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 01:20:16 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Fri Sep 23 01:20:16 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Fri Sep 23 01:20:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Fri Sep 23 01:25:28 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 01:25:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 01:25:28 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 01:25:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 01:25:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 01:25:28 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 01:25:28 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 01:25:28 2011] Fit fullrun_mos1_xmm0009221601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 01:29:25 2011] Spatial fit model total counts = 1548.990000, observed total counts = 1549.000000
[Fri Sep 23 01:29:25 2011] Offset between fit and detection position for source 1 = 0.099183 pixels
[Fri Sep 23 01:29:25 2011] 1553.767000 total counts/ 439.477000 bgd. counts: snr = 53.153291
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.099183 pixels
  Position = (288.1, 276.3) = 6 15 36.39 71 2 14.7
  Extent = 5.7 (5.3-6.0)", rotation angle = 0
  Source counts = 1114.3 +/- 39.4
  Background counts = 439.5
  Rate = 0.2 +/- 0.005
[Fri Sep 23 01:29:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 01:29:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 01:29:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 01:29:25 2011] Source does appear to be extended
[Fri Sep 23 01:29:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 01:33:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 01:33:10 2011] Initial guess for spatial extent in simple fitting = 5.68"
[Fri Sep 23 01:33:10 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.226
[Fri Sep 23 01:33:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.68"
[Fri Sep 23 01:36:42 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 23 01:36:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 01:36:42 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 23 01:36:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 01:36:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 01:36:42 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 01:36:42 2011] fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 01:36:42 2011] Fit fullrun_mos1_xmm0009221601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 01:39:50 2011] Spatial fit model total counts = 1551.890000, observed total counts = 1549.000000
[Fri Sep 23 01:39:50 2011] Offset between fit and detection position for source 1 = 0.004179 pixels
[Fri Sep 23 01:39:50 2011] 1556.683000 total counts/ 442.133000 bgd. counts: snr = 53.005763
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004179 pixels
  Position = (288.1, 276.3) = 6 15 36.39 71 2 14.7
  Extent = 5.7 (5.4-5.9)", rotation angle = 0
  Source counts = 1114.5 +/- 39.5
  Background counts = 442.1
  Rate = 0.2 +/- 0.005
[Fri Sep 23 01:39:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 01:39:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 01:39:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 01:39:50 2011] Source does appear to be extended
[Fri Sep 23 01:39:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 01:45:47 2011] Counts = 1114.550000, rescaling region sizes by 2.000000
[Fri Sep 23 01:45:47 2011] XMMSAS src. selection expression = ellipse(25015.665360, 23987.934600, 678.866420, 678.866420, 0.000000, X, Y)
[Fri Sep 23 01:45:47 2011] Writing source region out to fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 23 01:45:47 2011] Extracting stamp from image fullrun_mos1_xmm0009221601_pi300-10000_cl_sm2.00.img.gz, (249, 237) - (327, 315)
[Fri Sep 23 01:45:47 2011] XMMSAS bgd. selection expression = annulus(25015.665360, 23987.934600, 2262.888065, 4525.776130, X, Y) && !ellipse(27064.465200, 23807.269400, 367.283211, 367.283211, 0.000000, X, Y)
[Fri Sep 23 01:45:47 2011] Writing fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1.gif
[Fri Sep 23 01:45:48 2011] Mean detx,y = (356.45, -173.67) 
[Fri Sep 23 01:45:49 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 01:45:58 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 01:45:58 2011] Setting source spectrum file to fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 23 01:45:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 23 01:58:38 2011] Updating aperture counts using extracted products
[Fri Sep 23 01:58:38 2011] Error reading totcts from fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 23 01:58:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 01:58:38 2011] Using photon index=1.80, rate=0.155, arf fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1.arf
[Fri Sep 23 01:58:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 01:58:39 2011] Updating source flux to 1.5e-12
[Fri Sep 23 01:58:52 2011] Reading fit data from xmm0009221601/analysis//spectral/fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 23 01:58:52 2011] Spectral fit parameter nH value = 7.26213e+13
[Fri Sep 23 01:58:52 2011] Spectral fit parameter PhoIndex value = 1.19153
[Fri Sep 23 01:58:52 2011] Failed to get F(0.3-8.0) from xmm0009221601/analysis//spectral/fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 01:58:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 01:58:52 2011] Using Nh = 7.3e+13, photon index=1.19, rate=0.155, arf fullrun_mos1_xmm0009221601_pi300-10000_pass1_cl_src1.arf
[Fri Sep 23 01:58:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 01:58:52 2011] Updating source flux to 2.1e-12