[Sun Dec 25 09:56:17 2011] Detection parameters:
  Position = (254.2, 337.0) = 6 16 6.71 71 6 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.1 +/- 8.6
  Background counts = 5.9
  Rate = 0.007 +/- 0.001

[Sun Dec 25 09:56:18 2011] Off-axis axis estimate = 4.25'
[Sun Dec 25 09:56:35 2011] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 09:56:35 2011] Initial guess for spatial extent in simple fitting = 8.56"
[Sun Dec 25 09:56:35 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Sun Dec 25 09:56:35 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 8.56"
[Sun Dec 25 09:56:35 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_src2.ximg exists
[Sun Dec 25 09:56:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_src2.csv
[Sun Dec 25 09:56:35 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Dec 25 09:56:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_src2.csv
[Sun Dec 25 09:56:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:56:36 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Dec 25 09:56:36 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Dec 25 09:56:36 2011] Fit fullrun_mos1_xmm0009221001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Dec 25 09:56:42 2011] Spatial fit model total counts = 74.784000, observed total counts = 75.000000
[Sun Dec 25 09:56:42 2011] Offset between fit and detection position for source 2 = 0.286026 pixels
[Sun Dec 25 09:56:42 2011] 73.293100 total counts/ 45.964200 bgd. counts: snr = 4.030995
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.286026 pixels
  Position = (254.1, 337.3) = 6 16 6.83 71 6 39.0
  Extent = 4.2 (3.1-5.7)", rotation angle = 0
  Source counts = 27.3 +/- 8.6
  Background counts = 46.0
  Rate = 0.004 +/- 0.001
[Sun Dec 25 09:56:42 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:56:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:56:42 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:56:42 2011] Source does appear to be extended
[Sun Dec 25 09:56:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:56:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 09:56:56 2011] Initial guess for spatial extent in simple fitting = 4.23"
[Sun Dec 25 09:56:56 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.037
[Sun Dec 25 09:56:56 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 4.23"
[Sun Dec 25 09:56:58 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_src2.ximg exists
[Sun Dec 25 09:56:59 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_src2.csv
[Sun Dec 25 09:56:59 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Dec 25 09:56:59 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_src2.csv
[Sun Dec 25 09:56:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:56:59 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Dec 25 09:56:59 2011] fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Dec 25 09:56:59 2011] Fit fullrun_mos1_xmm0009221001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Dec 25 09:57:08 2011] Spatial fit model total counts = 74.999400, observed total counts = 75.000000
[Sun Dec 25 09:57:08 2011] Offset between fit and detection position for source 2 = 0.011261 pixels
[Sun Dec 25 09:57:08 2011] 73.494000 total counts/ 46.226600 bgd. counts: snr = 4.010493
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011261 pixels
  Position = (254.1, 337.3) = 6 16 6.82 71 6 39.0
  Extent = 4.1 (3.1-5.7)", rotation angle = 0
  Source counts = 27.3 +/- 8.6
  Background counts = 46.2
  Rate = 0.004 +/- 0.001
[Sun Dec 25 09:57:08 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:57:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:57:08 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:57:08 2011] Source does appear to be extended
[Sun Dec 25 09:57:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:57:20 2011] XMMSAS src. selection expression = ellipse(22058.500320, 29293.235600, 248.181607, 248.181607, 0.000000, X, Y)
[Sun Dec 25 09:57:20 2011] Not overwriting source region fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src.reg
[Sun Dec 25 09:57:20 2011] Extracting stamp from image fullrun_mos1_xmm0009221001_pi300-10000_cl_sm2.00.img.gz, (240, 323) - (268, 352)
[Sun Dec 25 09:57:20 2011] XMMSAS bgd. selection expression = annulus(22058.500320, 29293.235600, 413.636012, 827.272024, X, Y)
[Sun Dec 25 09:57:20 2011] Writing fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2.gif
[Sun Dec 25 09:57:20 2011] ../../xmm0009221001/products/events/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0009221001/products/events/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Dec 25 09:57:20 2011] Mean detx,y = (-5276.12, 2000.53) 
[Sun Dec 25 09:57:20 2011] ../../xmm0009221001/products/images/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src.img and ../../xmm0009221001/products/images/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Dec 25 09:57:20 2011] ../../xmm0009221001/products/spectra/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0009221001/products/spectra/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Dec 25 09:57:20 2011] Setting source spectrum file to fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 25 09:57:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Dec 25 09:57:20 2011] ../../xmm0009221001/products/lightcurves/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0009221001/products/lightcurves/fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Dec 25 09:57:23 2011] Not generating rmf since there are only 27 counts
[Sun Dec 25 09:57:23 2011] rmf not generated due to insufficient counts
[Sun Dec 25 09:57:23 2011] fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sun Dec 25 09:57:40 2011] Updating aperture counts using extracted products
[Sun Dec 25 09:57:40 2011] Error reading totcts from fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 25 09:57:42 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 09:57:42 2011] Using photon index=1.80, rate=0.00368, arf fullrun_mos1_xmm0009221001_pi300-10000_pass1_cl_src2.arf
[Sun Dec 25 09:57:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 09:57:42 2011] Updating source flux to 5.9e-14
[Sun Dec 25 09:57:46 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting