[Mon Sep 26 20:29:58 2011] Detection parameters:
  Position = (231.5, 326.4) = 6 16 48.72 71 2 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.6 +/- 13.7
  Background counts = 60.0
  Rate = 0.03 +/- 0.008

[Mon Sep 26 20:29:59 2011] Off-axis axis estimate = 5.26'
[Mon Sep 26 20:31:43 2011] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 20:31:43 2011] Initial guess for spatial extent in simple fitting = 9.06"
[Mon Sep 26 20:31:43 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Mon Sep 26 20:31:43 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 9.06"
[Mon Sep 26 20:55:58 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_src9.ximg exists
[Mon Sep 26 20:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_src9.csv
[Mon Sep 26 20:55:58 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Sep 26 20:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_src9.csv
[Mon Sep 26 20:55:58 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 20:55:58 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Sep 26 20:55:58 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Sep 26 20:55:58 2011] Fit fullrun_pn_xmm0009220801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Sep 26 20:59:05 2011] Source 9 is offset by -2.707526 and -8.542827 pixels which is larger than
2 X fitted extent = 7.977012 x 1.230795, not incorporating fit results
[Mon Sep 26 20:59:05 2011] Warning, spatial fit 9 centroid is now closest to src. 8
[Mon Sep 26 20:59:05 2011] Source 9 is offset by 3.799486 and -0.487632 pixels which is larger than
2 X fitted extent = 1.075531 x 6.773058, not incorporating fit results
[Mon Sep 26 20:59:05 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 20:59:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 20:59:05 2011] Assessing source extent using major
[Mon Sep 26 20:59:05 2011] Source does appear to be extended
[Mon Sep 26 20:59:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 20:59:09 2011] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 20:59:09 2011] Initial guess for spatial extent in simple fitting = 9.06"
[Mon Sep 26 20:59:09 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Mon Sep 26 20:59:09 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 9.06"
[Mon Sep 26 21:18:49 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_src9.ximg exists
[Mon Sep 26 21:18:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_src9.csv
[Mon Sep 26 21:18:49 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Sep 26 21:18:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_src9.csv
[Mon Sep 26 21:18:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 21:18:49 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Sep 26 21:18:49 2011] fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Sep 26 21:18:49 2011] Fit fullrun_pn_xmm0009220801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Sep 26 21:22:09 2011] Spatial fit model total counts = 324.282000, observed total counts = 343.000000
[Mon Sep 26 21:22:09 2011] Offset between fit and detection position for source 9 = 2.039818 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.039818 pixels
  Position = (230.5, 328.2) = 6 16 49.61 71 3 4.7
  Extent = 15.1 (15.0-15.1)", rotation angle = 0
  Source counts = 256.4 +/- 16.0
  Background counts = 0.0
  Rate = 0.2 +/- 0.01
[Mon Sep 26 21:22:09 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 21:22:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 21:22:09 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 21:22:09 2011] Source does appear to be extended
[Mon Sep 26 21:22:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 21:22:09 2011] Source is confused with source 8
[Mon Sep 26 21:22:13 2011] XMMSAS src. selection expression = ellipse(20004.587000, 28508.284600, 904.104026, 904.104026, 0.000000, X, Y)
[Mon Sep 26 21:22:13 2011] Writing source region out to fullrun_pn_xmm0009220801_pi300-10000_pass1_cl_src9_src.reg
[Mon Sep 26 21:22:13 2011] Extracting stamp from image fullrun_pn_xmm0009220801_pi300-10000_cl_sm2.00.img.gz, (179, 276) - (282, 380)
[Mon Sep 26 21:22:13 2011] XMMSAS bgd. selection expression = annulus(20004.587000, 28508.284600, 1506.840043, 3013.680087, X, Y) && !ellipse(16330.764000, 28691.596000, 2777.800080, 870.000025, 0.000000, X, Y) && !ellipse(15625.742000, 28879.390000, 1709.072049, 1068.728031, 195.312000, X, Y) && !ellipse(17684.406000, 28657.254600, 1622.856047, 1622.856047, 0.000000, X, Y) && !ellipse(20817.976608, 28421.567657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19197.541870, 27981.759399, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep 26 21:22:13 2011] Writing fullrun_pn_xmm0009220801_pi300-10000_pass1_cl_src9.gif
[Mon Sep 26 21:25:40 2011] Mean detx,y = (-7055.10, -494.09) 
[Mon Sep 26 21:25:41 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 21:26:06 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 21:26:06 2011] Setting source spectrum file to fullrun_pn_xmm0009220801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Sep 26 21:26:06 2011] Setting bgd. spectrum file to fullrun_pn_xmm0009220801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Sep 26 21:48:22 2011] Updating aperture counts using extracted products
[Mon Sep 26 21:48:22 2011] Error reading totcts from fullrun_pn_xmm0009220801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Sep 26 21:48:22 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 21:48:22 2011] Using photon index=1.80, rate=0.202, arf fullrun_pn_xmm0009220801_pi300-10000_pass1_cl_src9.arf
[Mon Sep 26 21:48:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 21:48:22 2011] Updating source flux to 7.9e-13
[Mon Sep 26 21:48:38 2011] Flag b found in src. 9 procflags, skipping spectral fitting
[Mon Sep 26 21:48:38 2011] Flag c found in src. 9 procflags, skipping spectral fitting