[Wed Sep 28 02:08:30 2011] Detection parameters:
  Position = (496.7, 347.1) = 6 12 48.68 71 4 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.0 +/- 9.4
  Background counts = 5.3
  Rate = 0.003 +/- 0.0007

[Wed Sep 28 02:08:31 2011] Off-axis axis estimate = 14.80'
[Wed Sep 28 03:00:05 2011] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:00:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 03:00:05 2011] Initial guess for spatial extent in simple fitting = 13.83"
[Wed Sep 28 03:00:05 2011] source mask rpix=3.2, npix_max = 54, mask sum = 48, frac = 0.887
[Wed Sep 28 03:00:05 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 13.83"
[Wed Sep 28 03:17:49 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_src9.ximg exists
[Wed Sep 28 03:17:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_src9.csv
[Wed Sep 28 03:17:49 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Sep 28 03:17:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_src9.csv
[Wed Sep 28 03:17:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:17:50 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Sep 28 03:17:50 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Sep 28 03:17:50 2011] Fit fullrun_mos2_xmm0009220601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Sep 28 03:18:00 2011] Spatial fit model total counts = 77.996800, observed total counts = 78.000000
[Wed Sep 28 03:18:00 2011] Offset between fit and detection position for source 5 = 0.517436 pixels
[Wed Sep 28 03:18:00 2011] 75.085000 total counts/ 51.814600 bgd. counts: snr = 3.232792
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.517436 pixels
  Position = (496.7, 347.6) = 6 12 48.70 71 4 15.0
  Extent = 7.5 (3.5-11.5)", rotation angle = 0
  Source counts = 23.3 +/- 8.7
  Background counts = 51.8
  Rate = 0.002 +/- 0.0007
[Wed Sep 28 03:18:00 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:18:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:18:00 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:18:00 2011] Source does appear to be extended
[Wed Sep 28 03:18:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:01:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:01:46 2011] Initial guess for spatial extent in simple fitting = 7.53"
[Wed Sep 28 04:01:46 2011] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.954
[Wed Sep 28 04:01:46 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 7.53"
[Wed Sep 28 04:15:43 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_src8.ximg exists
[Wed Sep 28 04:15:43 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_src8.csv
[Wed Sep 28 04:15:43 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Sep 28 04:15:43 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_src8.csv
[Wed Sep 28 04:15:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:15:43 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Sep 28 04:15:43 2011] fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Sep 28 04:15:43 2011] Fit fullrun_mos2_xmm0009220601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Sep 28 04:15:52 2011] Spatial fit model total counts = 62.995700, observed total counts = 63.000000
[Wed Sep 28 04:15:52 2011] Offset between fit and detection position for source 5 = 0.136689 pixels
[Wed Sep 28 04:15:52 2011] 60.528500 total counts/ 36.409200 bgd. counts: snr = 3.997230
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.136689 pixels
  Position = (496.7, 347.7) = 6 12 48.73 71 4 15.6
  Extent = 7.7 (3.5-11.8)", rotation angle = 0
  Source counts = 24.1 +/- 7.8
  Background counts = 36.4
  Rate = 0.002 +/- 0.0006
[Wed Sep 28 04:15:52 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:15:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:15:52 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 04:15:52 2011] Source does appear to be extended
[Wed Sep 28 04:15:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:45:05 2011] XMMSAS src. selection expression = ellipse(43162.267800, 30205.105800, 461.473813, 461.473813, 0.000000, X, Y)
[Wed Sep 28 04:45:05 2011] Writing source region out to fullrun_mos2_xmm0009220601_pi300-10000_pass1_cl_src5_src.reg
[Wed Sep 28 04:45:05 2011] Extracting stamp from image fullrun_mos2_xmm0009220601_pi300-10000_cl_sm2.00.img.gz, (470, 321) - (523, 374)
[Wed Sep 28 04:45:05 2011] XMMSAS bgd. selection expression = annulus(43162.267800, 30205.105800, 769.123022, 1538.246044, X, Y)
[Wed Sep 28 04:45:05 2011] Writing fullrun_mos2_xmm0009220601_pi300-10000_pass1_cl_src5.gif
[Wed Sep 28 04:47:04 2011] Mean detx,y = (-16429.75, 574.75) 
[Wed Sep 28 04:47:05 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 04:47:15 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 04:47:16 2011] Setting source spectrum file to fullrun_mos2_xmm0009220601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Sep 28 04:47:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0009220601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Sep 28 04:52:20 2011] Not generating rmf since there are only 24 counts
[Wed Sep 28 04:52:20 2011] rmf not generated due to insufficient counts
[Wed Sep 28 04:52:53 2011] Updating aperture counts using extracted products
[Wed Sep 28 04:52:53 2011] Error reading totcts from fullrun_mos2_xmm0009220601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Sep 28 04:52:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 04:52:53 2011] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0009220601_pi300-10000_pass1_cl_src5.arf
[Wed Sep 28 04:52:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 04:52:53 2011] Updating source flux to 5.6e-14
[Wed Sep 28 04:53:13 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting