[Fri Sep 30 02:04:27 2011] Detection parameters:
  Position = (335.3, 315.3) = 6 15 15.34 71 2 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.7 +/- 14.1
  Background counts = 12.2
  Rate = 0.03 +/- 0.003

[Fri Sep 30 02:04:27 2011] Off-axis axis estimate = 2.94'
[Fri Sep 30 02:05:44 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:05:44 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Fri Sep 30 02:05:44 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.166
[Fri Sep 30 02:05:44 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.90"
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src7.ximg exists
[Fri Sep 30 02:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src7.csv
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Sep 30 02:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src7.csv
[Fri Sep 30 02:15:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep 30 02:15:00 2011] Fit fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Sep 30 02:44:41 2011] Source 7 is offset by 7.476735 and -3.691617 pixels which is larger than
2 X fitted extent = 0.907697 x 0.907697, not incorporating fit results
[Fri Sep 30 02:44:41 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:44:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:44:41 2011] Assessing source extent using major
[Fri Sep 30 02:44:41 2011] Source does appear to be extended
[Fri Sep 30 02:44:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:44:50 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:44:50 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Fri Sep 30 02:44:50 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.166
[Fri Sep 30 02:44:50 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.90"
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Sep 30 02:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src5.csv
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Sep 30 02:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src5.csv
[Fri Sep 30 02:54:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 30 02:54:13 2011] Fit fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 30 03:18:44 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 20.915276 pixels away
[Fri Sep 30 03:18:44 2011] Spatial fit model total counts = 210.000000, observed total counts = 210.000000
[Fri Sep 30 03:18:44 2011] Offset between fit and detection position for source 7 = 0.227192 pixels
[Fri Sep 30 03:18:44 2011] 210.665400 total counts/ 140.047000 bgd. counts: snr = 5.967343
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.227192 pixels
  Position = (335.1, 315.4) = 6 15 15.51 71 2 2.4
  Extent = 5.2 (4.2-6.7)", rotation angle = 0
  Source counts = 70.6 +/- 14.5
  Background counts = 140.0
  Rate = 0.01 +/- 0.003
[Fri Sep 30 03:18:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:18:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:18:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:18:44 2011] Source does appear to be extended
[Fri Sep 30 03:18:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:18:52 2011] XMMSAS src. selection expression = ellipse(29105.258420, 27391.230000, 312.476011, 312.476011, 0.000000, X, Y)
[Fri Sep 30 03:18:52 2011] Writing source region out to fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src7_src.reg
[Fri Sep 30 03:18:52 2011] Extracting stamp from image fullrun_pn_xmm0009220501_pi300-10000_cl_sm2.00.img.gz, (317, 297) - (353, 333)
[Fri Sep 30 03:18:52 2011] XMMSAS bgd. selection expression = annulus(29105.258420, 27391.230000, 520.793352, 1041.586703, X, Y)
[Fri Sep 30 03:18:52 2011] Writing fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src7.gif
[Fri Sep 30 03:21:27 2011] Mean detx,y = (2111.68, -1.79) 
[Fri Sep 30 03:21:28 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:21:44 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:21:44 2011] Setting source spectrum file to fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Sep 30 03:21:44 2011] Setting bgd. spectrum file to fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Sep 30 03:26:25 2011] Not generating rmf since there are only 70 counts
[Fri Sep 30 03:26:25 2011] rmf not generated due to insufficient counts
[Fri Sep 30 03:39:18 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:39:18 2011] Error reading totcts from fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Sep 30 03:39:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:39:18 2011] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src7.arf
[Fri Sep 30 03:39:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:39:18 2011] Updating source flux to 4.4e-14
[Fri Sep 30 03:39:40 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Fri Sep 30 03:39:40 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting