[Fri Sep 30 02:04:27 2011] Detection parameters:
  Position = (434.7, 339.1) = 6 13 46.49 71 3 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.7 +/- 11.6
  Background counts = 10.1
  Rate = 0.03 +/- 0.004

[Fri Sep 30 02:04:27 2011] Off-axis axis estimate = 10.31'
[Fri Sep 30 02:05:44 2011] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:05:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 02:05:44 2011] Initial guess for spatial extent in simple fitting = 11.58"
[Fri Sep 30 02:05:44 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.900
[Fri Sep 30 02:05:44 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 11.58"
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src6.ximg exists
[Fri Sep 30 02:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src6.csv
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Sep 30 02:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src6.csv
[Fri Sep 30 02:15:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep 30 02:15:00 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep 30 02:15:00 2011] Fit fullrun_pn_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep 30 02:44:41 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.223975 pixels away
[Fri Sep 30 02:44:41 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:44:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:44:41 2011] Assessing source extent using major
[Fri Sep 30 02:44:41 2011] Source does appear to be extended
[Fri Sep 30 02:44:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:44:50 2011] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:44:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 02:44:50 2011] Initial guess for spatial extent in simple fitting = 11.58"
[Fri Sep 30 02:44:50 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.900
[Fri Sep 30 02:44:50 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.58"
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src4.ximg exists
[Fri Sep 30 02:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src4.csv
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Sep 30 02:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src4.csv
[Fri Sep 30 02:54:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Sep 30 02:54:13 2011] fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Sep 30 02:54:13 2011] Fit fullrun_pn_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Sep 30 03:18:44 2011] Source 6 is offset by -1.003469 and -9.147612 pixels which is larger than
2 X fitted extent = 1.331297 x 1.331297, not incorporating fit results
[Fri Sep 30 03:18:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:18:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:18:44 2011] Assessing source extent using major
[Fri Sep 30 03:18:44 2011] Source does appear to be extended
[Fri Sep 30 03:18:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:18:52 2011] XMMSAS src. selection expression = ellipse(37767.379639, 29454.299713, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 30 03:18:52 2011] Writing source region out to fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src6_src.reg
[Fri Sep 30 03:18:52 2011] Extracting stamp from image fullrun_pn_xmm0009220501_pi300-10000_cl_sm2.00.img.gz, (397, 302) - (472, 377)
[Fri Sep 30 03:18:52 2011] XMMSAS bgd. selection expression = annulus(37767.379639, 29454.299713, 1087.500000, 2175.000000, X, Y)
[Fri Sep 30 03:18:52 2011] Writing fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src6.gif
[Fri Sep 30 03:20:54 2011] Mean detx,y = (10746.70, -2080.06) 
[Fri Sep 30 03:20:56 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:21:22 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:21:22 2011] Setting source spectrum file to fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Sep 30 03:21:22 2011] Setting bgd. spectrum file to fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Sep 30 03:26:22 2011] Not generating rmf since there are only 80 counts
[Fri Sep 30 03:26:22 2011] rmf not generated due to insufficient counts
[Fri Sep 30 03:39:17 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:39:18 2011] Error reading totcts from fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Sep 30 03:39:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:39:18 2011] Using photon index=1.80, rate=0.0299, arf fullrun_pn_xmm0009220501_pi300-10000_pass1_cl_src6.arf
[Fri Sep 30 03:39:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:39:18 2011] Updating source flux to 1.3e-13
[Fri Sep 30 03:39:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting