[Fri Sep 30 02:04:47 2011] Detection parameters:
  Position = (311.4, 317.9) = 6 15 36.62 71 2 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1662.3 +/- 49.1
  Background counts = 3.4
  Rate = 0.2 +/- 0.007

[Fri Sep 30 02:04:47 2011] Off-axis axis estimate = 1.70'
[Fri Sep 30 02:15:00 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:15:00 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Sep 30 02:15:00 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Fri Sep 30 02:15:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Sep 30 02:30:42 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 30 02:30:42 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 02:30:42 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 30 02:30:42 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 02:30:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:30:42 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 02:30:42 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 02:30:42 2011] Fit fullrun_mos1_xmm0009220501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 02:44:43 2011] Spatial fit model total counts = 1515.920000, observed total counts = 1516.000000
[Fri Sep 30 02:44:43 2011] Offset between fit and detection position for source 1 = 0.175449 pixels
[Fri Sep 30 02:44:43 2011] 1512.012000 total counts/ 331.882000 bgd. counts: snr = 64.779561
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.175449 pixels
  Position = (311.3, 317.8) = 6 15 36.77 71 2 13.1
  Extent = 6.0 (5.6-6.3)", rotation angle = 0
  Source counts = 1180.1 +/- 38.9
  Background counts = 331.9
  Rate = 0.2 +/- 0.005
[Fri Sep 30 02:44:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:44:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:44:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:44:43 2011] Source does appear to be extended
[Fri Sep 30 02:44:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:54:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:54:13 2011] Initial guess for spatial extent in simple fitting = 5.96"
[Fri Sep 30 02:54:13 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.144
[Fri Sep 30 02:54:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.96"
[Fri Sep 30 03:07:29 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 03:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 03:07:29 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 03:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 03:07:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:07:29 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 03:07:29 2011] fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 03:07:29 2011] Fit fullrun_mos1_xmm0009220501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 03:18:46 2011] Spatial fit model total counts = 1516.000000, observed total counts = 1516.000000
[Fri Sep 30 03:18:46 2011] Offset between fit and detection position for source 1 = 0.000538 pixels
[Fri Sep 30 03:18:46 2011] 1512.093000 total counts/ 334.573000 bgd. counts: snr = 64.375831
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000538 pixels
  Position = (311.3, 317.8) = 6 15 36.77 71 2 13.1
  Extent = 5.9 (5.6-6.3)", rotation angle = 0
  Source counts = 1177.5 +/- 38.9
  Background counts = 334.6
  Rate = 0.2 +/- 0.005
[Fri Sep 30 03:18:46 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:18:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:18:46 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:18:46 2011] Source does appear to be extended
[Fri Sep 30 03:18:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:26:30 2011] Counts = 1177.520000, rescaling region sizes by 2.000000
[Fri Sep 30 03:26:30 2011] XMMSAS src. selection expression = ellipse(27031.925000, 27602.733800, 710.999833, 710.999833, 0.000000, X, Y)
[Fri Sep 30 03:26:30 2011] Writing source region out to fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 03:26:30 2011] Extracting stamp from image fullrun_mos1_xmm0009220501_pi300-10000_cl_sm2.00.img.gz, (270, 277) - (352, 359)
[Fri Sep 30 03:26:30 2011] XMMSAS bgd. selection expression = annulus(27031.925000, 27602.733800, 2369.999443, 4739.998885, X, Y) && !ellipse(29107.040500, 27354.111600, 405.254412, 405.254412, 0.000000, X, Y)
[Fri Sep 30 03:26:30 2011] Writing fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 03:26:32 2011] Mean detx,y = (279.44, -269.24) 
[Fri Sep 30 03:26:33 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:26:48 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:26:48 2011] Setting source spectrum file to fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 03:26:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 03:39:18 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:39:18 2011] Error reading totcts from fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 03:39:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:39:18 2011] Using photon index=1.80, rate=0.162, arf fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 03:39:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:39:18 2011] Updating source flux to 1.6e-12
[Fri Sep 30 03:39:27 2011] Reading fit data from xmm0009220501/analysis//spectral/fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 03:39:27 2011] Spectral fit parameter nH value = 303554000000.0
[Fri Sep 30 03:39:27 2011] Spectral fit parameter PhoIndex value = 1.06319
[Fri Sep 30 03:39:27 2011] Failed to get F(0.3-8.0) from xmm0009220501/analysis//spectral/fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 03:39:27 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:39:27 2011] Using Nh = 3e+11, photon index=1.06, rate=0.162, arf fullrun_mos1_xmm0009220501_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 03:39:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 03:39:27 2011] Updating source flux to 2.3e-12