[Sun Mar 18 22:06:38 2012] Detection parameters:
  Position = (271.5, 290.0) = 21 40 17.92 -23 39 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.5 +/- 18.7
  Background counts = 51.7
  Rate = 0.008 +/- 0.001

[Sun Mar 18 22:06:39 2012] Off-axis axis estimate = 2.05'
[Sun Mar 18 22:41:32 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 22:41:32 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Mar 18 22:41:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.715
[Sun Mar 18 22:41:32 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.45"
[Sun Mar 18 23:11:41 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar 18 23:11:41 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar 18 23:11:41 2012] Fit fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Mar 18 23:11:42 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar 18 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar 18 23:11:42 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar 18 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar 18 23:11:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 23:11:52 2012] Source 6 is offset by -6.364658 and 5.234839 pixels which is larger than
2 X fitted extent = 3.558368 x 6.834483, not incorporating fit results
[Sun Mar 18 23:11:52 2012] Source 6 is offset by -2.654360 and 7.169184 pixels which is larger than
2 X fitted extent = 7.142023 x 7.142023, not incorporating fit results
[Sun Mar 18 23:11:52 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 23:11:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 23:11:52 2012] Assessing source extent using major
[Sun Mar 18 23:11:52 2012] Source does appear to be extended
[Sun Mar 18 23:11:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 23:42:03 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 23:42:03 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Mar 18 23:42:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.715
[Sun Mar 18 23:42:03 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.45"
[Mon Mar 19 00:12:49 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Mar 19 00:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_src4.csv
[Mon Mar 19 00:12:49 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Mar 19 00:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_src4.csv
[Mon Mar 19 00:12:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 00:12:49 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Mar 19 00:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Mar 19 00:12:49 2012] fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Mar 19 00:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Mar 19 00:12:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 00:13:00 2012] Source 6 is offset by -6.364658 and 5.065299 pixels which is larger than
2 X fitted extent = 1.408524 x 1.408524, not incorporating fit results
[Mon Mar 19 00:13:00 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 00:13:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 00:13:00 2012] Assessing source extent using major
[Mon Mar 19 00:13:00 2012] Source does appear to be extended
[Mon Mar 19 00:13:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:53:22 2012] XMMSAS src. selection expression = ellipse(23570.924713, 25184.316986, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 01:53:22 2012] Writing source region out to fullrun_mos2_xmm0008830101_pi300-10000_pass1_cl_src6_src.reg
[Mon Mar 19 01:53:22 2012] Extracting stamp from image fullrun_mos2_xmm0008830101_pi300-10000_cl_sm2.00.img.gz, (234, 253) - (309, 328)
[Mon Mar 19 01:53:22 2012] XMMSAS bgd. selection expression = annulus(23570.924713, 25184.316986, 1087.500000, 2175.000000, X, Y) && !ellipse(24361.668800, 24725.839000, 857.424025, 857.424025, 0.000000, X, Y) && !ellipse(24898.479187, 25843.669617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23229.102966, 24154.646179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.160065, 25069.826813, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 01:53:22 2012] Writing fullrun_mos2_xmm0008830101_pi300-10000_pass1_cl_src6.gif
[Mon Mar 19 01:58:36 2012] Mean detx,y = (-476.62, -112.25) 
[Mon Mar 19 01:58:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 01:58:45 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 01:58:45 2012] Setting source spectrum file to fullrun_mos2_xmm0008830101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Mar 19 01:58:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008830101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Mar 19 02:05:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 02:05:05 2012] rmf not generated due to insufficient counts
[Mon Mar 19 02:06:28 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:06:28 2012] Error reading totcts from fullrun_mos2_xmm0008830101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Mar 19 02:06:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:06:28 2012] Using photon index=1.80, rate=0.00849, arf fullrun_mos2_xmm0008830101_pi300-10000_pass1_cl_src6.arf
[Mon Mar 19 02:06:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:06:28 2012] Updating source flux to 8.6e-14
[Mon Mar 19 02:06:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting