[Sun Mar 18 22:06:17 2012] Detection parameters:
  Position = (323.8, 264.4) = 21 40 1.35 -23 41 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.6 +/- 13.5
  Background counts = 43.2
  Rate = 0.003 +/- 0.0008

[Sun Mar 18 22:06:17 2012] Off-axis axis estimate = 3.08'
[Sun Mar 18 22:31:16 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 22:31:16 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sun Mar 18 22:31:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Sun Mar 18 22:31:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.97"
[Sun Mar 18 22:41:31 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar 18 22:41:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_src4.csv
[Sun Mar 18 22:41:31 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar 18 22:41:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_src4.csv
[Sun Mar 18 22:41:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 22:41:32 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar 18 22:41:32 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar 18 22:41:32 2012] Fit fullrun_mos1_xmm0008830101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Mar 18 23:11:48 2012] Spatial fit model total counts = 173.767000, observed total counts = 174.000000
[Sun Mar 18 23:11:48 2012] Offset between fit and detection position for source 4 = 2.196994 pixels
[Sun Mar 18 23:11:48 2012] 173.361200 total counts/ 120.440000 bgd. counts: snr = 4.822190
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.196994 pixels
  Position = (324.7, 266.4) = 21 40 1.07 -23 40 59.6
  Extent = 9.8 (7.2-13.7)", rotation angle = 0
  Source counts = 52.9 +/- 13.2
  Background counts = 120.4
  Rate = 0.003 +/- 0.0009
[Sun Mar 18 23:11:48 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 23:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 23:11:48 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 23:11:48 2012] Source does appear to be extended
[Sun Mar 18 23:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 23:36:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 23:36:03 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Sun Mar 18 23:36:03 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.821
[Sun Mar 18 23:36:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.83"
[Sun Mar 18 23:42:03 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 18 23:42:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_src3.csv
[Sun Mar 18 23:42:03 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 18 23:42:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_src3.csv
[Sun Mar 18 23:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 23:42:03 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 18 23:42:03 2012] fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 18 23:42:03 2012] Fit fullrun_mos1_xmm0008830101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Mar 19 00:12:57 2012] Spatial fit model total counts = 165.999000, observed total counts = 166.000000
[Mon Mar 19 00:12:57 2012] Offset between fit and detection position for source 4 = 0.304464 pixels
[Mon Mar 19 00:12:57 2012] 167.791600 total counts/ 110.621000 bgd. counts: snr = 5.435681
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.304464 pixels
  Position = (324.7, 266.1) = 21 40 1.08 -23 41 0.9
  Extent = 10.0 (7.6-14.8)", rotation angle = 0
  Source counts = 57.2 +/- 13.0
  Background counts = 110.6
  Rate = 0.004 +/- 0.0008
[Mon Mar 19 00:12:57 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 00:12:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 00:12:57 2012] Assessing source extent using major axis lower bound
[Mon Mar 19 00:12:57 2012] Source does appear to be extended
[Mon Mar 19 00:12:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:34:17 2012] XMMSAS src. selection expression = ellipse(28199.798600, 23098.872400, 601.656017, 601.656017, 0.000000, X, Y)
[Mon Mar 19 01:34:17 2012] Writing source region out to fullrun_mos1_xmm0008830101_pi300-10000_pass1_cl_src4_src.reg
[Mon Mar 19 01:34:17 2012] Extracting stamp from image fullrun_mos1_xmm0008830101_pi300-10000_cl_sm2.00.img.gz, (290, 231) - (359, 301)
[Mon Mar 19 01:34:17 2012] XMMSAS bgd. selection expression = annulus(28199.798600, 23098.872400, 1002.760029, 2005.520058, X, Y)
[Mon Mar 19 01:34:17 2012] Writing fullrun_mos1_xmm0008830101_pi300-10000_pass1_cl_src4.gif
[Mon Mar 19 01:38:59 2012] Mean detx,y = (473.04, -4438.89) 
[Mon Mar 19 01:39:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 01:39:17 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 01:39:17 2012] Setting source spectrum file to fullrun_mos1_xmm0008830101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 19 01:39:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0008830101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 19 01:53:17 2012] Not generating rmf since there are only 57 counts
[Mon Mar 19 01:53:17 2012] rmf not generated due to insufficient counts
[Mon Mar 19 02:06:28 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:06:28 2012] Error reading totcts from fullrun_mos1_xmm0008830101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 19 02:06:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:06:28 2012] Using photon index=1.80, rate=0.0037, arf fullrun_mos1_xmm0008830101_pi300-10000_pass1_cl_src4.arf
[Mon Mar 19 02:06:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:06:28 2012] Updating source flux to 4.5e-14
[Mon Mar 19 02:06:29 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting