[Mon Jun  3 00:40:42 2013] Detection parameters:
  Position = (391.9, 255.9) = 18 18 5.98 -12 14 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1836.3 +/- 52.8
  Background counts = 11.3
  Rate = 0.2 +/- 0.007

[Mon Jun  3 00:40:43 2013] Off-axis axis estimate = 7.44'
[Mon Jun  3 02:02:40 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 02:02:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 02:02:40 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Mon Jun  3 02:02:40 2013] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.561
[Mon Jun  3 02:02:40 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.15"
[Mon Jun  3 02:46:05 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun  3 02:46:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_src1.csv
[Mon Jun  3 02:46:05 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun  3 02:46:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_src1.csv
[Mon Jun  3 02:46:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 02:46:05 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun  3 02:46:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun  3 02:46:05 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun  3 02:46:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun  3 02:46:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 03:39:45 2013] Spatial fit model total counts = 2321.930000, observed total counts = 1864.000000
[Mon Jun  3 03:39:45 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 03:39:45 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 03:39:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 03:39:45 2013] Assessing source extent using major
[Mon Jun  3 03:39:45 2013] Source does appear to be extended
[Mon Jun  3 03:39:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 05:11:27 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 05:11:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 05:11:27 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Mon Jun  3 05:11:27 2013] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.561
[Mon Jun  3 05:11:27 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.15"
[Mon Jun  3 05:50:53 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun  3 05:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_src1.csv
[Mon Jun  3 05:50:53 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun  3 05:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_src1.csv
[Mon Jun  3 05:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 05:50:54 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun  3 05:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun  3 05:50:54 2013] fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun  3 05:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun  3 05:50:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 06:42:09 2013] Spatial fit model total counts = 2320.290000, observed total counts = 1864.000000
[Mon Jun  3 06:42:09 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 06:42:09 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 06:42:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 06:42:09 2013] Assessing source extent using major
[Mon Jun  3 06:42:09 2013] Source does appear to be extended
[Mon Jun  3 06:42:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 07:30:56 2013] Counts = 1836.285767, rescaling region sizes by 2.000000
[Mon Jun  3 07:30:56 2013] XMMSAS src. selection expression = ellipse(34045.764008, 22217.881958, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun  3 07:30:56 2013] Writing source region out to fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun  3 07:30:56 2013] Extracting stamp from image fullrun_mos1_xmm0008820601_pi300-10000_cl_sm2.00.img.gz, (317, 181) - (467, 331)
[Mon Jun  3 07:30:56 2013] XMMSAS bgd. selection expression = annulus(34045.764008, 22217.881958, 4350.000000, 8700.000000, X, Y) && !ellipse(32845.156360, 26719.848600, 439.963213, 439.963213, 0.000000, X, Y) && !ellipse(34898.863600, 22104.702000, 426.599212, 426.599212, 0.000000, X, Y) && !ellipse(29138.102200, 21586.777600, 544.539216, 249.285607, 358.309111, X, Y) && !ellipse(31300.745148, 25472.642548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26900.600200, 22910.057600, 608.611218, 325.178409, 47.757746, X, Y) && !ellipse(32001.200600, 21606.938200, 391.461611, 391.461611, 0.000000, X, Y) && !ellipse(26373.637800, 20294.206000, 865.328025, 865.328025, 0.000000, X, Y) && !ellipse(30405.401400, 20094.311600, 1509.696043, 383.692011, 7.370177, X, Y) && !ellipse(39069.239660, 22685.683060, 318.349898, 318.349898, 0.000000, X, Y) && !ellipse(41091.951569, 26791.568176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41712.184998, 27016.417297, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 07:30:56 2013] Writing fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1.gif
[Mon Jun  3 07:31:01 2013] Mean detx,y = (-5345.68, 6695.93) 
[Mon Jun  3 07:31:03 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 07:33:42 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 07:33:43 2013] Setting source spectrum file to fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  3 07:33:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun  3 07:42:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 07:42:39 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:16:24 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:16:24 2013] Total counts from fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2160.00
[Mon Jun  3 08:16:24 2013] Total counts from fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 5350.00
[Mon Jun  3 08:16:24 2013] Got source and background scale factors 4812875.000000, 159275307.000000
[Mon Jun  3 08:16:24 2013] User source parameters:
  Position = (391.9, 255.9) = 18 18 5.98 -12 14 34.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1998.3 +/- 47.5
  Background aperture counts = 161.7
  Rate = 0.1 +/- 0.004

[Mon Jun  3 08:16:24 2013] Updating counts from extracted products
[Mon Jun  3 08:16:24 2013] Set source signif. to 1998.34/12.71 = 157.17
[Mon Jun  3 08:16:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:16:29 2013] Using photon index=1.80, rate=0.148, arf fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1.arf
[Mon Jun  3 08:16:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:16:29 2013] Updating source flux to 4.5e-12
[Mon Jun  3 08:16:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:16:42 2013] xmm0008820601/analysis//spectral/fullrun_mos1_xmm0008820601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete