[Mon May 13 18:32:49 2013] Detection parameters:
  Position = (216.4, 255.0) = 16 16 40.08 -83 43 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.3 +/- 22.5
  Background counts = 153.3
  Rate = 0.005 +/- 0.0006

[Mon May 13 18:32:50 2013] Off-axis axis estimate = 6.73'
[Mon May 13 18:37:04 2013] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 18:37:04 2013] Initial guess for spatial extent in simple fitting = 9.80"
[Mon May 13 18:37:04 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.990
[Mon May 13 18:37:04 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 9.80"
[Mon May 13 19:28:13 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src23.ximg exists
[Mon May 13 19:28:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src23.csv
[Mon May 13 19:28:13 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon May 13 19:28:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src23.csv
[Mon May 13 19:28:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:28:14 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon May 13 19:28:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon May 13 19:28:14 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon May 13 19:28:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon May 13 19:28:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:32 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.241290 pixels away
[Mon May 13 20:31:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:31:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:31:32 2013] Assessing source extent using major
[Mon May 13 20:31:32 2013] Source does appear to be extended
[Mon May 13 20:31:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 20:31:48 2013] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 20:31:48 2013] Initial guess for spatial extent in simple fitting = 9.80"
[Mon May 13 20:31:48 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.990
[Mon May 13 20:31:48 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.80"
[Mon May 13 21:10:15 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 13 21:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src20.csv
[Mon May 13 21:10:15 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 13 21:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src20.csv
[Mon May 13 21:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 21:10:15 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 13 21:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 13 21:10:15 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 13 21:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 13 21:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:23:50 2013] Source 24 is offset by -8.634484 and -3.234412 pixels which is larger than
2 X fitted extent = 1.125899 x 1.125899, not incorporating fit results
[Mon May 13 22:23:50 2013] Vigneting correction estimate = 1.000000
[Mon May 13 22:23:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 22:23:50 2013] Assessing source extent using major
[Mon May 13 22:23:50 2013] Source does appear to be extended
[Mon May 13 22:23:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 22:24:07 2013] XMMSAS src. selection expression = ellipse(18774.089920, 22135.333115, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 22:24:07 2013] Writing source region out to fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24_src.reg
[Mon May 13 22:24:07 2013] Extracting stamp from image fullrun_pn_xmm0008820401_pi300-10000_cl_sm2.00.img.gz, (179, 217) - (254, 292)
[Mon May 13 22:24:07 2013] XMMSAS bgd. selection expression = annulus(18774.089920, 22135.333115, 1087.500000, 2175.000000, X, Y) && !ellipse(18620.649200, 23327.301600, 444.117613, 444.117613, 0.000000, X, Y)
[Mon May 13 22:24:07 2013] Writing fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24.gif
[Mon May 13 22:47:49 2013] Mean detx,y = (6991.17, 1883.59) 
[Mon May 13 22:47:53 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 22:48:26 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 22:48:26 2013] Setting source spectrum file to fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May 13 22:48:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon May 13 23:13:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 23:13:02 2013] rmf not generated due to insufficient counts
[Tue May 14 00:05:47 2013] Updating aperture counts using extracted products
[Tue May 14 00:05:48 2013] Total counts from fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 566.00
[Tue May 14 00:05:48 2013] Total counts from fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24_bgd.pi.gz = 3372.00
[Tue May 14 00:05:48 2013] Got source and background scale factors 1272630.000000, 9261368.000000
[Tue May 14 00:05:48 2013] User source parameters:
  Position = (216.4, 255.0) = 16 16 40.08 -83 43 52.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 102.6 +/- 24.8
  Background aperture counts = 463.4
  Rate = 0.003 +/- 0.0006

[Tue May 14 00:05:48 2013] Updating counts from extracted products
[Tue May 14 00:05:48 2013] Set source signif. to 102.64/21.53 = 4.77
[Tue May 14 00:05:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:05:51 2013] Using photon index=1.80, rate=0.00268, arf fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24.arf
[Tue May 14 00:05:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:05:51 2013] Updating source flux to 1.1e-14
[Tue May 14 00:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:06:19 2013] xmm0008820401/analysis//spectral/fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete