[Mon May 13 18:32:49 2013] Detection parameters:
  Position = (191.5, 337.5) = 16 17 41.59 -83 37 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10892.0 +/- 121.3
  Background counts = 138.4
  Rate = 0.2 +/- 0.002

[Mon May 13 18:32:50 2013] Off-axis axis estimate = 8.25'
[Mon May 13 18:37:04 2013] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 18:37:04 2013] Initial guess for spatial extent in simple fitting = 10.56"
[Mon May 13 18:37:04 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.613
[Mon May 13 18:37:04 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.56"
[Mon May 13 19:28:13 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 13 19:28:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src2.csv
[Mon May 13 19:28:13 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 13 19:28:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src2.csv
[Mon May 13 19:28:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:28:13 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 13 19:28:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 13 19:28:13 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 13 19:28:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 13 19:28:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:32 2013] Spatial fit model total counts = 10804.200000, observed total counts = 8876.000000
[Mon May 13 20:31:32 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 20:31:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:31:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:31:32 2013] Assessing source extent using major
[Mon May 13 20:31:32 2013] Source does appear to be extended
[Mon May 13 20:31:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 20:31:48 2013] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 20:31:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 20:31:48 2013] Initial guess for spatial extent in simple fitting = 10.56"
[Mon May 13 20:31:48 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.613
[Mon May 13 20:31:48 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.56"
[Mon May 13 21:10:14 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 13 21:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src2.csv
[Mon May 13 21:10:14 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 13 21:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src2.csv
[Mon May 13 21:10:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 21:10:15 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 13 21:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 13 21:10:15 2013] fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 13 21:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 13 21:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:23:49 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.035584 pixels away
[Mon May 13 22:23:50 2013] Source 2 is offset by -5.190224 and 6.831977 pixels which is larger than
2 X fitted extent = 1.211775 x 1.211775, not incorporating fit results
[Mon May 13 22:23:50 2013] Vigneting correction estimate = 1.000000
[Mon May 13 22:23:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 22:23:50 2013] Assessing source extent using major
[Mon May 13 22:23:50 2013] Source does appear to be extended
[Mon May 13 22:23:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 22:24:07 2013] Counts = 10892.000977, rescaling region sizes by 3.000000
[Mon May 13 22:24:07 2013] XMMSAS src. selection expression = ellipse(16612.346481, 29316.278015, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon May 13 22:24:07 2013] Writing source region out to fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2_src.reg
[Mon May 13 22:24:07 2013] Extracting stamp from image fullrun_pn_xmm0008820401_pi300-10000_cl_sm2.00.img.gz, (79, 225) - (304, 450)
[Mon May 13 22:24:07 2013] XMMSAS bgd. selection expression = annulus(16612.346481, 29316.278015, 9787.500000, 19575.000000, X, Y) && !ellipse(24070.938600, 13574.961000, 527.090415, 385.652811, 359.621421, X, Y) && !ellipse(11671.232086, 30500.227264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.915894, 11004.151329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31602.990200, 14217.766268, 568.322416, 347.376010, 332.100900, X, Y) && !ellipse(28233.137573, 10575.798195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.362305, 40414.616425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29607.404633, 40329.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.417664, 40337.052399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27325.489258, 35101.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33291.990570, 34490.948700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31799.779144, 33591.315918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19451.617554, 32368.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17901.271606, 31379.278259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16224.088272, 27801.865234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19916.900818, 25683.244781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29245.794952, 25244.118866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.649200, 23327.301600, 444.117613, 444.117613, 0.000000, X, Y) && !ellipse(26514.091064, 22898.352692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18774.089920, 22135.333115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34440.107544, 21055.247284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25281.891968, 20656.795090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29156.628400, 19960.522600, 387.201611, 387.201611, 0.000000, X, Y) && !ellipse(15713.761108, 19590.068039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14223.851593, 18588.277695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25353.978668, 17838.939484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.950745, 16470.701996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27757.462524, 16325.750671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31412.808624, 15537.909225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21594.878400, 11896.101700, 587.122417, 327.151209, 12.953629, X, Y) && !ellipse(28936.396423, 42168.178314, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 22:24:07 2013] Writing fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2.gif
[Mon May 13 22:26:15 2013] Mean detx,y = (5238.93, 9185.92) 
[Mon May 13 22:26:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 22:33:14 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 22:33:15 2013] Setting source spectrum file to fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 13 22:33:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 13 23:00:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 23:00:31 2013] rmf not generated due to insufficient counts
[Tue May 14 00:05:40 2013] Updating aperture counts using extracted products
[Tue May 14 00:05:40 2013] Total counts from fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 12917.00
[Tue May 14 00:05:40 2013] Total counts from fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 102846.00
[Tue May 14 00:05:40 2013] Got source and background scale factors 10284110.000000, 296144852.000000
[Tue May 14 00:05:40 2013] User source parameters:
  Position = (191.5, 337.5) = 16 17 41.59 -83 37 48.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 9345.5 +/- 114.7
  Background aperture counts = 3571.5
  Rate = 0.2 +/- 0.003

[Tue May 14 00:05:40 2013] Updating counts from extracted products
[Tue May 14 00:05:40 2013] Set source signif. to 9345.51/59.76 = 156.38
[Tue May 14 00:05:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:05:51 2013] Using photon index=1.80, rate=0.244, arf fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2.arf
[Tue May 14 00:05:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:05:51 2013] Updating source flux to 1.1e-12
[Tue May 14 00:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:06:19 2013] xmm0008820401/analysis//spectral/fullrun_pn_xmm0008820401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete