[Mon May 13 18:33:36 2013] Detection parameters:
  Position = (216.6, 255.0) = 16 16 39.33 -83 43 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.2 +/- 13.7
  Background counts = 51.0
  Rate = 0.002 +/- 0.0004

[Mon May 13 18:33:37 2013] Off-axis axis estimate = 6.71'
[Mon May 13 19:52:20 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon May 13 19:52:20 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon May 13 19:52:20 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.926
[Mon May 13 19:52:20 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.79"
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src16.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src16.csv
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src16.csv
[Mon May 13 20:31:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 13 20:31:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:40 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.352346 pixels away
[Mon May 13 20:31:40 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:31:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:31:40 2013] Assessing source extent using major
[Mon May 13 20:31:40 2013] Source does appear to be extended
[Mon May 13 20:31:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 21:32:18 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon May 13 21:32:18 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon May 13 21:32:18 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.926
[Mon May 13 21:32:18 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 9.79"
[Mon May 13 22:23:42 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_src16.ximg exists
[Mon May 13 22:23:42 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon May 13 22:23:42 2013] Fit fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon May 13 22:23:43 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon May 13 22:23:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src16.csv
[Mon May 13 22:23:43 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon May 13 22:23:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src16.csv
[Mon May 13 22:23:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:23:57 2013] Spatial fit model total counts = 373.510000, observed total counts = 369.000000
[Mon May 13 22:23:57 2013] Offset between fit and detection position for source 24 = 0.237298 pixels
[Mon May 13 22:23:57 2013] 368.746500 total counts/ 323.435000 bgd. counts: snr = 2.519503
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.237298 pixels
  Position = (216.5, 255.2) = 16 16 39.77 -83 43 53.1
  Extent = 4.1 (3.9-4.3)", rotation angle = 35 (6-68) degrees
  Source counts = 45.3 +/- 19.2
  Background counts = 323.4
  Rate = 0.0009 +/- 0.0004
[Mon May 13 22:23:57 2013] Vigneting correction estimate = 1.000000
[Mon May 13 22:23:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 22:23:57 2013] Assessing source extent using major axis lower bound
[Mon May 13 22:23:57 2013] Source does appear to be extended
[Mon May 13 22:23:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Mon May 13 23:42:09 2013] XMMSAS src. selection expression = ellipse(18784.616000, 22152.367600, 248.742007, 146.788804, 35.165268, X, Y)
[Mon May 13 23:42:09 2013] Writing source region out to fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24_src.reg
[Mon May 13 23:42:09 2013] Extracting stamp from image fullrun_mos2_xmm0008820401_pi300-10000_cl_sm2.00.img.gz, (202, 241) - (231, 269)
[Mon May 13 23:42:09 2013] XMMSAS bgd. selection expression = annulus(18784.616000, 22152.367600, 414.570012, 829.140024, X, Y) && !ellipse(18632.664200, 23334.204600, 394.789611, 194.573606, 68.243972, X, Y)
[Mon May 13 23:42:09 2013] Writing fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24.gif
[Mon May 13 23:49:22 2013] Mean detx,y = (-6867.30, -1990.33) 
[Mon May 13 23:49:23 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 23:49:34 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 23:49:34 2013] Setting source spectrum file to fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May 13 23:49:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue May 14 00:02:31 2013] Not generating rmf since there are only 45 counts
[Tue May 14 00:02:31 2013] rmf not generated due to insufficient counts
[Tue May 14 00:06:01 2013] Updating aperture counts using extracted products
[Tue May 14 00:06:01 2013] Total counts from fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 64.00
[Tue May 14 00:06:01 2013] Total counts from fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24_bgd.pi.gz = 256.00
[Tue May 14 00:06:02 2013] Got source and background scale factors 112692.000000, 1558544.000000
[Tue May 14 00:06:02 2013] User source parameters:
  Position = (216.5, 255.2) = 16 16 39.77 -83 43 53.1
  Extent = 4.1 (3.9-4.3)", rotation angle = 35 (6-68) degrees
  Source aperture counts = 45.5 +/- 9.0
  Background aperture counts = 18.5
  Rate = 0.0009 +/- 0.0002

[Tue May 14 00:06:05 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:06:05 2013] Using photon index=1.80, rate=0.000937, arf fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24.arf
[Tue May 14 00:06:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:06:05 2013] Updating source flux to 2e-14
[Tue May 14 00:06:11 2013] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:06:14 2013] xmm0008820401/analysis//spectral/fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete