[Mon May 13 18:33:36 2013] Detection parameters:
  Position = (394.1, 127.2) = 16 8 41.71 -83 53 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.9 +/- 18.3
  Background counts = 38.2
  Rate = 0.003 +/- 0.0004

[Mon May 13 18:33:37 2013] Off-axis axis estimate = 14.22'
[Mon May 13 19:52:20 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Mon May 13 19:52:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 19:52:20 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Mon May 13 19:52:20 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.073
[Mon May 13 19:52:20 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.54"
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src10.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src10.csv
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src10.csv
[Mon May 13 20:31:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon May 13 20:31:25 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon May 13 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon May 13 20:31:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:40 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.772109 pixels away
[Mon May 13 20:31:40 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:31:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:31:40 2013] Assessing source extent using major
[Mon May 13 20:31:40 2013] Source does appear to be extended
[Mon May 13 20:31:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 21:32:18 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Mon May 13 21:32:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 21:32:18 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Mon May 13 21:32:18 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.073
[Mon May 13 21:32:18 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.54"
[Mon May 13 22:23:42 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_src10.ximg exists
[Mon May 13 22:23:42 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon May 13 22:23:42 2013] Fit fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon May 13 22:23:43 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon May 13 22:23:43 2013] fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon May 13 22:23:43 2013] Fit fullrun_mos2_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon May 13 22:23:57 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.784503 pixels away
[Mon May 13 22:23:57 2013] Vigneting correction estimate = 1.000000
[Mon May 13 22:23:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 22:23:57 2013] Assessing source extent using major
[Mon May 13 22:23:57 2013] Source does appear to be extended
[Mon May 13 22:23:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 23:42:09 2013] XMMSAS src. selection expression = ellipse(34234.170197, 11016.493233, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 23:42:09 2013] Writing source region out to fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 23:42:09 2013] Extracting stamp from image fullrun_mos2_xmm0008820401_pi300-10000_cl_sm2.00.img.gz, (357, 90) - (432, 165)
[Mon May 13 23:42:09 2013] XMMSAS bgd. selection expression = annulus(34234.170197, 11016.493233, 1087.500000, 2175.000000, X, Y)
[Mon May 13 23:42:09 2013] Writing fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1.gif
[Mon May 13 23:47:20 2013] Mean detx,y = (843.89, 15394.74) 
[Mon May 13 23:47:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 23:47:48 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 23:47:48 2013] Setting source spectrum file to fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 23:47:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 14 00:01:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 00:01:59 2013] rmf not generated due to insufficient counts
[Tue May 14 00:06:00 2013] Updating aperture counts using extracted products
[Tue May 14 00:06:00 2013] Total counts from fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 291.00
[Tue May 14 00:06:00 2013] Total counts from fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1069.00
[Tue May 14 00:06:00 2013] Got source and background scale factors 1332800.000000, 8251977.000000
[Tue May 14 00:06:00 2013] User source parameters:
  Position = (394.1, 127.2) = 16 8 41.71 -83 53 8.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 118.3 +/- 18.1
  Background aperture counts = 172.7
  Rate = 0.002 +/- 0.0004

[Tue May 14 00:06:00 2013] Updating counts from extracted products
[Tue May 14 00:06:00 2013] Set source signif. to 118.34/13.14 = 9.01
[Tue May 14 00:06:05 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:06:05 2013] Using photon index=1.80, rate=0.00245, arf fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1.arf
[Tue May 14 00:06:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:06:05 2013] Updating source flux to 8e-14
[Tue May 14 00:06:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:06:14 2013] xmm0008820401/analysis//spectral/fullrun_mos2_xmm0008820401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete