[Mon May 13 18:33:11 2013] Detection parameters:
  Position = (134.1, 352.1) = 16 20 10.49 -83 36 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.0 +/- 14.3
  Background counts = 37.0
  Rate = 0.002 +/- 0.0003

[Mon May 13 18:33:12 2013] Off-axis axis estimate = 12.53'
[Mon May 13 19:28:14 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Mon May 13 19:28:14 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Mon May 13 19:28:14 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.898
[Mon May 13 19:28:14 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 12.70"
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 13 19:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src13.csv
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 13 19:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src13.csv
[Mon May 13 19:52:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 13 19:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 13 19:52:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 13 19:52:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:35 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.661431 pixels away
[Mon May 13 20:31:35 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:31:35 2013] Assessing source extent using major
[Mon May 13 20:31:35 2013] Source does appear to be extended
[Mon May 13 20:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 21:10:15 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Mon May 13 21:10:15 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Mon May 13 21:10:15 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.898
[Mon May 13 21:10:15 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 12.70"
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src13.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src13.csv
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src13.csv
[Mon May 13 21:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May 13 21:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:23:53 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.821965 pixels away
[Mon May 13 22:23:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 22:23:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 22:23:53 2013] Assessing source extent using major
[Mon May 13 22:23:53 2013] Source does appear to be extended
[Mon May 13 22:23:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 23:20:45 2013] XMMSAS src. selection expression = ellipse(11616.802658, 30585.050140, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 23:20:45 2013] Writing source region out to fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6_src.reg
[Mon May 13 23:20:45 2013] Extracting stamp from image fullrun_mos1_xmm0008820401_pi300-10000_cl_sm2.00.img.gz, (97, 315) - (172, 390)
[Mon May 13 23:20:45 2013] XMMSAS bgd. selection expression = annulus(11616.802658, 30585.050140, 1087.500000, 2175.000000, X, Y)
[Mon May 13 23:20:45 2013] Writing fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6.gif
[Mon May 13 23:25:42 2013] Mean detx,y = (-12602.42, 8561.54) 
[Mon May 13 23:25:43 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 23:26:08 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 23:26:08 2013] Setting source spectrum file to fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May 13 23:26:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon May 13 23:40:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 23:40:30 2013] rmf not generated due to insufficient counts
[Tue May 14 00:05:54 2013] Updating aperture counts using extracted products
[Tue May 14 00:05:54 2013] Total counts from fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 185.00
[Tue May 14 00:05:54 2013] Total counts from fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6_bgd.pi.gz = 780.00
[Tue May 14 00:05:54 2013] Got source and background scale factors 816978.000000, 5364775.000000
[Tue May 14 00:05:55 2013] User source parameters:
  Position = (134.1, 352.1) = 16 20 10.49 -83 36 42.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.2 +/- 14.6
  Background aperture counts = 118.8
  Rate = 0.001 +/- 0.0003

[Tue May 14 00:05:55 2013] Updating counts from extracted products
[Tue May 14 00:05:55 2013] Set source signif. to 66.22/10.90 = 6.08
[Tue May 14 00:05:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:05:56 2013] Using photon index=1.80, rate=0.00139, arf fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6.arf
[Tue May 14 00:05:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:05:56 2013] Updating source flux to 4.1e-14
[Tue May 14 00:06:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:06:11 2013] xmm0008820401/analysis//spectral/fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete