[Mon May 13 18:33:12 2013] Detection parameters:
  Position = (283.2, 157.8) = 16 13 43.39 -83 51 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.5 +/- 14.9
  Background counts = 32.1
  Rate = 0.002 +/- 0.0003

[Mon May 13 18:33:12 2013] Off-axis axis estimate = 10.26'
[Mon May 13 19:28:14 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 19:28:14 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Mon May 13 19:28:14 2013] source mask rpix=2.7, npix_max = 39, mask sum = 24, frac = 0.602
[Mon May 13 19:28:14 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 11.56"
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 13 19:52:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src15.csv
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 13 19:52:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src15.csv
[Mon May 13 19:52:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 13 19:52:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 13 19:52:19 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 13 19:52:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 13 19:52:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:31:35 2013] Warning, spatial fit 15 centroid is now closest to src. 3
[Mon May 13 20:31:35 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:31:35 2013] Assessing source extent using major
[Mon May 13 20:31:35 2013] Source does appear to be extended
[Mon May 13 20:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 20:31:35 2013] Source is confused with source 3
[Mon May 13 21:10:15 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 21:10:15 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Mon May 13 21:10:15 2013] source mask rpix=2.7, npix_max = 39, mask sum = 24, frac = 0.602
[Mon May 13 21:10:15 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 11.56"
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src15.csv
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src15.csv
[Mon May 13 21:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 13 21:32:18 2013] fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 13 21:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 13 21:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008820401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:23:53 2013] Warning, spatial fit 15 centroid is now closest to src. 3
[Mon May 13 22:23:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 22:23:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 22:23:53 2013] Assessing source extent using major
[Mon May 13 22:23:53 2013] Source does appear to be extended
[Mon May 13 22:23:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 23:20:45 2013] XMMSAS src. selection expression = ellipse(24587.338959, 13680.517105, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 23:20:45 2013] Writing source region out to fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17_src.reg
[Mon May 13 23:20:45 2013] Extracting stamp from image fullrun_mos1_xmm0008820401_pi300-10000_cl_sm2.00.img.gz, (246, 120) - (321, 195)
[Mon May 13 23:20:45 2013] XMMSAS bgd. selection expression = annulus(24587.338959, 13680.517105, 1087.500000, 2175.000000, X, Y) && !ellipse(24038.801941, 13626.873566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21581.747559, 11870.811966, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 23:20:45 2013] Writing fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17.gif
[Mon May 13 23:26:36 2013] Mean detx,y = (8359.80, 6302.14) 
[Mon May 13 23:26:38 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 23:27:00 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 23:27:00 2013] Setting source spectrum file to fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 13 23:27:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May 13 23:40:58 2013] Not generating rmf since there are only 84 counts
[Mon May 13 23:40:58 2013] rmf not generated due to insufficient counts
[Tue May 14 00:05:55 2013] Updating aperture counts using extracted products
[Tue May 14 00:05:55 2013] Total counts from fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 527.00
[Tue May 14 00:05:55 2013] Total counts from fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1539.00
[Tue May 14 00:05:55 2013] Got source and background scale factors 878578.000000, 9649863.000000
[Tue May 14 00:05:55 2013] User source parameters:
  Position = (283.2, 157.8) = 16 13 43.39 -83 51 6.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 386.9 +/- 24.0
  Background aperture counts = 140.1
  Rate = 0.008 +/- 0.0005

[Tue May 14 00:05:55 2013] Updating counts from extracted products
[Tue May 14 00:05:55 2013] Set source signif. to 386.88/11.84 = 32.68
[Tue May 14 00:05:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:05:56 2013] Using photon index=1.80, rate=0.0081, arf fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17.arf
[Tue May 14 00:05:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:05:56 2013] Updating source flux to 1.7e-13
[Tue May 14 00:06:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:06:11 2013] xmm0008820401/analysis//spectral/fullrun_mos1_xmm0008820401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete