[Tue Aug 28 05:44:56 2012] Detection parameters:
  Position = (266.6, 249.2) = 17 2 13.30 -29 58 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.9 +/- 19.3
  Background counts = 106.7
  Rate = 0.003 +/- 0.0007

[Tue Aug 28 05:44:56 2012] Off-axis axis estimate = 4.25'
[Tue Aug 28 06:40:38 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:40:38 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Tue Aug 28 06:40:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Tue Aug 28 06:40:38 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.55"
[Tue Aug 28 17:10:33 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src55.ximg exists
[Tue Aug 28 17:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src55.csv
[Tue Aug 28 17:10:33 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Aug 28 17:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src55.csv
[Tue Aug 28 17:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:10:34 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Aug 28 17:10:34 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Aug 28 17:10:34 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Tue Aug 28 17:10:53 2012] Spatial fit model total counts = 1926.800000, observed total counts = 1924.000000
[Tue Aug 28 17:10:53 2012] Offset between fit and detection position for source 64 = 8.407571 pixels
[Tue Aug 28 17:10:53 2012] 2023.108000 total counts/ 1800.660000 bgd. counts: snr = 5.242189
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 8.407571 pixels
  Position = (262.1, 242.1) = 17 2 14.81 -29 59 20.4
  Extent = 15.7 (13.0-17.1)", rotation angle = 0
  Source counts = 222.4 +/- 45.0
  Background counts = 1800.7
  Rate = 0.007 +/- 0.001
[Tue Aug 28 17:10:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:10:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:10:53 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 17:10:53 2012] Source does appear to be extended
[Tue Aug 28 17:10:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:37:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 17:37:42 2012] Initial guess for spatial extent in simple fitting = 15.74"
[Tue Aug 28 17:37:42 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.944
[Tue Aug 28 17:37:42 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 15.74"
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src40.ximg exists
[Tue Aug 28 22:25:05 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src40.csv
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Aug 28 22:25:05 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src40.csv
[Tue Aug 28 22:25:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 22:25:06 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Aug 28 22:25:06 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Aug 28 22:25:06 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Aug 28 22:25:14 2012] Source 64 is offset by -4.796115 and -6.673747 pixels which is larger than
2 X fitted extent = 2.190097 x 2.190097, not incorporating fit results
[Tue Aug 28 22:25:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:25:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:25:14 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 22:25:14 2012] Source does appear to be extended
[Tue Aug 28 22:25:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 22:45:13 2012] XMMSAS src. selection expression = ellipse(22752.162000, 21017.232000, 944.190027, 944.190027, 0.000000, X, Y)
[Tue Aug 28 22:45:13 2012] Writing source region out to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src64_src.reg
[Tue Aug 28 22:45:13 2012] Extracting stamp from image fullrun_mos2_xmm0008620701_pi300-10000_cl_sm2.00.img.gz, (208, 188) - (316, 296)
[Tue Aug 28 22:45:13 2012] XMMSAS bgd. selection expression = annulus(22752.162000, 21017.232000, 1573.650045, 3147.300091, X, Y) && !ellipse(24883.079200, 24182.206400, 4738.344136, 4738.344136, 0.000000, X, Y) && !ellipse(24666.824000, 24039.558000, 3258.000094, 3258.000094, 0.000000, X, Y) && !ellipse(24005.375122, 24230.996857, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23808.678000, 23065.364000, 2172.000062, 2172.000062, 0.000000, X, Y) && !ellipse(23961.816711, 24744.429077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.909912, 22719.812592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.412872, 18836.797729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.124573, 19609.739151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25183.716949, 20920.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.467957, 20223.722641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.064728, 18142.248703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.861481, 21358.480835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19896.714000, 24135.804800, 1404.752040, 1404.752040, 0.000000, X, Y) && !ellipse(19476.142000, 25368.294200, 1424.648041, 1424.648041, 0.000000, X, Y) && !ellipse(21649.986000, 21592.514000, 1402.928040, 1402.928040, 0.000000, X, Y)
[Tue Aug 28 22:45:13 2012] Writing fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src64.gif
[Tue Aug 28 23:26:16 2012] Mean detx,y = (-2359.58, 2885.57) 
[Tue Aug 28 23:26:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 23:26:25 2012] grppha failed
[Tue Aug 28 23:26:25 2012] Setting source spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src64_src.pi.gz
[Tue Aug 28 23:26:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Tue Aug 28 23:27:48 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:27:48 2012] Error reading totcts from fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src64_src.pi.gz
[Tue Aug 28 23:27:48 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:27:50 2012] Flag b found in src. 64 procflags, skipping spectral fitting
[Tue Aug 28 23:27:50 2012] Source 64 has no response, skipping
[Tue Aug 28 23:27:51 2012] xmm0008620701/analysis//spectral/fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete