[Tue Aug 28 05:44:54 2012] Detection parameters:
  Position = (284.2, 280.0) = 17 2 7.41 -29 56 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129425.0 +/- 432.8
  Background counts = 144.5
  Rate = 5 +/- 0.02

[Tue Aug 28 05:44:56 2012] Off-axis axis estimate = 1.69'
[Tue Aug 28 06:40:38 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:40:38 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Aug 28 06:40:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.795
[Tue Aug 28 06:40:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.27"
[Tue Aug 28 17:10:32 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src2.ximg exists
[Tue Aug 28 17:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src2.csv
[Tue Aug 28 17:10:32 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Aug 28 17:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src2.csv
[Tue Aug 28 17:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:10:33 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Aug 28 17:10:33 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Aug 28 17:10:33 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Aug 28 17:10:53 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Tue Aug 28 17:10:53 2012] Spatial fit model total counts = 124880.000000, observed total counts = 94170.000000
[Tue Aug 28 17:10:53 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 17:10:53 2012] Spatial fit model total counts = 72093.800000, observed total counts = 72972.000000
[Tue Aug 28 17:10:53 2012] Offset between fit and detection position for source 4 = 3.127811 pixels
[Tue Aug 28 17:10:53 2012] Warning, changing simple spatial fit ID from 2 to 4
[Tue Aug 28 17:10:53 2012] 80287.000000 total counts/ 25599.400000 bgd. counts: snr = 341.801506
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.127811 pixels
  Position = (284.1, 276.9) = 17 2 7.44 -29 56 49.3
  Extent = 13.6 (13.6-13.6)", rotation angle = 0
  Source counts = 54687.6 +/- 283.3
  Background counts = 25599.4
  Rate = 2 +/- 0.009
[Tue Aug 28 17:10:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:10:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:10:53 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 17:10:53 2012] Source does appear to be extended
[Tue Aug 28 17:10:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:10:53 2012] Source is confused with source 1
[Tue Aug 28 17:37:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 17:37:42 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Tue Aug 28 17:37:42 2012] source mask rpix=3.1, npix_max = 52, mask sum = 36, frac = 0.687
[Tue Aug 28 17:37:42 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.57"
[Tue Aug 28 22:25:04 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src2.ximg exists
[Tue Aug 28 22:25:04 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Aug 28 22:25:04 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Aug 28 22:25:05 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Aug 28 22:25:14 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Tue Aug 28 22:25:14 2012] Spatial fit model total counts = 121689.000000, observed total counts = 94170.000000
[Tue Aug 28 22:25:14 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 22:25:14 2012] Spatial fit model total counts = 86051.900000, observed total counts = 72972.000000
[Tue Aug 28 22:25:14 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 22:25:14 2012] Source 4 is offset by -2.219517 and 6.570299 pixels which is larger than
2 X fitted extent = 3.951623 x 3.951623, not incorporating fit results
[Tue Aug 28 22:25:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:25:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:25:14 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 22:25:14 2012] Source does appear to be extended
[Tue Aug 28 22:25:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 22:45:11 2012] Counts = 54687.600000, rescaling region sizes by 3.000000
[Tue Aug 28 22:45:11 2012] XMMSAS src. selection expression = ellipse(24666.824000, 24039.558000, 2443.500070, 2443.500070, 0.000000, X, Y)
[Tue Aug 28 22:45:11 2012] Writing source region out to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src4_src.reg
[Tue Aug 28 22:45:11 2012] Extracting stamp from image fullrun_mos2_xmm0008620701_pi300-10000_cl_sm2.00.img.gz, (144, 136) - (425, 417)
[Tue Aug 28 22:45:12 2012] XMMSAS bgd. selection expression = annulus(24666.824000, 24039.558000, 12217.500352, 24435.000703, X, Y) && !ellipse(24883.079200, 24182.206400, 4738.344136, 4738.344136, 0.000000, X, Y) && !ellipse(24005.375122, 24230.996857, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23808.678000, 23065.364000, 2172.000062, 2172.000062, 0.000000, X, Y) && !ellipse(23961.816711, 24744.429077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.394714, 25275.118988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.909912, 22719.812592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26999.956116, 23979.085022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24767.790680, 26736.489594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.412872, 18836.797729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.876400, 27343.820000, 1122.648032, 1122.648032, 0.000000, X, Y) && !ellipse(25323.124573, 19609.739151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39655.251495, 26654.690796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25183.716949, 20920.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24391.817000, 29212.277900, 1031.248030, 1031.248030, 0.000000, X, Y) && !ellipse(25265.467957, 20223.722641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.064728, 18142.248703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23915.765228, 26838.665741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24339.155600, 30117.396000, 1322.800038, 592.296017, 78.666200, X, Y) && !ellipse(26819.092865, 21804.978439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.861481, 21358.480835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.860100, 16418.216400, 499.024014, 499.024014, 0.000000, X, Y) && !ellipse(26829.620056, 22676.110809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.497528, 28225.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26200.314000, 26531.308000, 1566.896045, 1566.896045, 0.000000, X, Y) && !ellipse(21844.990000, 27343.928000, 2677.840077, 2677.840077, 0.000000, X, Y) && !ellipse(21060.814200, 25854.420000, 1349.480039, 1349.480039, 0.000000, X, Y) && !ellipse(26793.276000, 27311.826000, 1166.064034, 1166.064034, 0.000000, X, Y) && !ellipse(21173.268000, 28028.568000, 1338.920039, 1338.920039, 0.000000, X, Y) && !ellipse(19896.714000, 24135.804800, 1404.752040, 1404.752040, 0.000000, X, Y) && !ellipse(19476.142000, 25368.294200, 1424.648041, 1424.648041, 0.000000, X, Y) && !ellipse(22752.162000, 21017.232000, 1258.920036, 1258.920036, 0.000000, X, Y) && !ellipse(21649.986000, 21592.514000, 1402.928040, 1402.928040, 0.000000, X, Y)
[Tue Aug 28 22:45:12 2012] Writing fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src4.gif
[Tue Aug 28 22:49:25 2012] Mean detx,y = (11.70, -36.11) 
[Tue Aug 28 22:49:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 22:56:40 2012] grppha failed
[Tue Aug 28 22:56:40 2012] Setting source spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Aug 28 22:56:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Aug 28 23:27:47 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:27:47 2012] Error reading totcts from fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Aug 28 23:27:48 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:27:50 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Aug 28 23:27:50 2012] Flag p found in src. 4 procflags, skipping spectral fitting
[Tue Aug 28 23:27:50 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Tue Aug 28 23:27:50 2012] Source 4 has no response, skipping
[Tue Aug 28 23:27:51 2012] xmm0008620701/analysis//spectral/fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete