[Tue Aug 28 05:44:55 2012] Detection parameters:
  Position = (289.9, 246.1) = 17 2 5.49 -29 59 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.9 +/- 28.8
  Background counts = 114.1
  Rate = 0.01 +/- 0.001

[Tue Aug 28 05:44:56 2012] Off-axis axis estimate = 3.85'
[Tue Aug 28 06:40:38 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:40:38 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Tue Aug 28 06:40:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Tue Aug 28 06:40:38 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.35"
[Tue Aug 28 17:10:32 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src22.ximg exists
[Tue Aug 28 17:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src22.csv
[Tue Aug 28 17:10:32 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Aug 28 17:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src22.csv
[Tue Aug 28 17:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:10:34 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Aug 28 17:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Aug 28 17:10:34 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Aug 28 17:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Aug 28 17:10:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:10:53 2012] Warning, spatial fit 22 centroid is now closest to src. 14
[Tue Aug 28 17:10:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:10:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:10:53 2012] Assessing source extent using major
[Tue Aug 28 17:10:53 2012] Source does appear to be extended
[Tue Aug 28 17:10:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:10:53 2012] Source is confused with source 14
[Tue Aug 28 17:37:42 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 17:37:42 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Tue Aug 28 17:37:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Tue Aug 28 17:37:42 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.35"
[Tue Aug 28 22:25:04 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src22.ximg exists
[Tue Aug 28 22:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src22.csv
[Tue Aug 28 22:25:04 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue Aug 28 22:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src22.csv
[Tue Aug 28 22:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue Aug 28 22:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue Aug 28 22:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue Aug 28 22:25:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 22:25:14 2012] Warning, spatial fit 22 centroid is now closest to src. 6
[Tue Aug 28 22:25:14 2012] Spatial fit model total counts = 9054.830000, observed total counts = 5760.000000
[Tue Aug 28 22:25:14 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 22:25:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:25:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:25:14 2012] Assessing source extent using major
[Tue Aug 28 22:25:14 2012] Source does appear to be extended
[Tue Aug 28 22:25:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 22:45:12 2012] XMMSAS src. selection expression = ellipse(25173.861481, 21358.480835, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 22:45:12 2012] Writing source region out to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src24_src.reg
[Tue Aug 28 22:45:12 2012] Extracting stamp from image fullrun_mos2_xmm0008620701_pi300-10000_cl_sm2.00.img.gz, (252, 209) - (327, 284)
[Tue Aug 28 22:45:12 2012] XMMSAS bgd. selection expression = annulus(25173.861481, 21358.480835, 1087.500000, 2175.000000, X, Y) && !ellipse(24883.079200, 24182.206400, 4738.344136, 4738.344136, 0.000000, X, Y) && !ellipse(24666.824000, 24039.558000, 3258.000094, 3258.000094, 0.000000, X, Y) && !ellipse(24005.375122, 24230.996857, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23808.678000, 23065.364000, 2172.000062, 2172.000062, 0.000000, X, Y) && !ellipse(24183.909912, 22719.812592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26999.956116, 23979.085022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.412872, 18836.797729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.124573, 19609.739151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25183.716949, 20920.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.467957, 20223.722641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26819.092865, 21804.978439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26829.620056, 22676.110809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22752.162000, 21017.232000, 1258.920036, 1258.920036, 0.000000, X, Y) && !ellipse(21649.986000, 21592.514000, 1402.928040, 1402.928040, 0.000000, X, Y)
[Tue Aug 28 22:45:12 2012] Writing fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src24.gif
[Tue Aug 28 23:22:01 2012] Mean detx,y = (46.04, 2775.53) 
[Tue Aug 28 23:22:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 23:22:08 2012] grppha failed
[Tue Aug 28 23:22:08 2012] Setting source spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src24_src.pi.gz
[Tue Aug 28 23:22:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Aug 28 23:26:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 23:26:55 2012] rmf not generated due to insufficient counts
[Tue Aug 28 23:27:48 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:27:48 2012] Error reading totcts from fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src24_src.pi.gz
[Tue Aug 28 23:27:48 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:27:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 23:27:51 2012] xmm0008620701/analysis//spectral/fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete