[Tue Aug 28 05:44:54 2012] Detection parameters:
  Position = (275.5, 309.0) = 17 2 10.33 -29 54 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 346.7 +/- 29.8
  Background counts = 132.1
  Rate = 0.01 +/- 0.001

[Tue Aug 28 05:44:56 2012] Off-axis axis estimate = 1.84'
[Tue Aug 28 06:40:38 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:40:38 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Aug 28 06:40:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.626
[Tue Aug 28 06:40:38 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.35"
[Tue Aug 28 17:10:32 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src19.ximg exists
[Tue Aug 28 17:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src19.csv
[Tue Aug 28 17:10:32 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Aug 28 17:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src19.csv
[Tue Aug 28 17:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:10:34 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Aug 28 17:10:34 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Aug 28 17:10:34 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Aug 28 17:10:53 2012] Source 16 is offset by 7.206543 and 5.803100 pixels which is larger than
2 X fitted extent = 2.552198 x 2.552198, not incorporating fit results
[Tue Aug 28 17:10:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:10:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:10:53 2012] Assessing source extent using major
[Tue Aug 28 17:10:53 2012] Source does appear to be extended
[Tue Aug 28 17:10:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:37:42 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 17:37:42 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Aug 28 17:37:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.626
[Tue Aug 28 17:37:42 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.35"
[Tue Aug 28 22:25:04 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src19.ximg exists
[Tue Aug 28 22:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src19.csv
[Tue Aug 28 22:25:04 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Aug 28 22:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src19.csv
[Tue Aug 28 22:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Aug 28 22:25:05 2012] fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Aug 28 22:25:05 2012] Fit fullrun_mos2_xmm0008620701_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Aug 28 22:25:14 2012] Source 16 is offset by 7.206543 and 5.803100 pixels which is larger than
2 X fitted extent = 2.635986 x 2.635986, not incorporating fit results
[Tue Aug 28 22:25:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:25:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:25:14 2012] Assessing source extent using major
[Tue Aug 28 22:25:14 2012] Source does appear to be extended
[Tue Aug 28 22:25:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 22:45:12 2012] XMMSAS src. selection expression = ellipse(23915.765228, 26838.665741, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 22:45:12 2012] Writing source region out to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src16_src.reg
[Tue Aug 28 22:45:12 2012] Extracting stamp from image fullrun_mos2_xmm0008620701_pi300-10000_cl_sm2.00.img.gz, (238, 272) - (313, 347)
[Tue Aug 28 22:45:12 2012] XMMSAS bgd. selection expression = annulus(23915.765228, 26838.665741, 1087.500000, 2175.000000, X, Y) && !ellipse(24883.079200, 24182.206400, 4738.344136, 4738.344136, 0.000000, X, Y) && !ellipse(24666.824000, 24039.558000, 3258.000094, 3258.000094, 0.000000, X, Y) && !ellipse(24005.375122, 24230.996857, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23808.678000, 23065.364000, 2172.000062, 2172.000062, 0.000000, X, Y) && !ellipse(23961.816711, 24744.429077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.394714, 25275.118988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24767.790680, 26736.489594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.876400, 27343.820000, 1122.648032, 1122.648032, 0.000000, X, Y) && !ellipse(24391.817000, 29212.277900, 1031.248030, 1031.248030, 0.000000, X, Y) && !ellipse(24339.155600, 30117.396000, 1322.800038, 592.296017, 78.666200, X, Y) && !ellipse(25184.497528, 28225.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26200.314000, 26531.308000, 1566.896045, 1566.896045, 0.000000, X, Y) && !ellipse(21844.990000, 27343.928000, 2677.840077, 2677.840077, 0.000000, X, Y) && !ellipse(21060.814200, 25854.420000, 1349.480039, 1349.480039, 0.000000, X, Y) && !ellipse(26793.276000, 27311.826000, 1166.064034, 1166.064034, 0.000000, X, Y) && !ellipse(21173.268000, 28028.568000, 1338.920039, 1338.920039, 0.000000, X, Y)
[Tue Aug 28 22:45:12 2012] Writing fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src16.gif
[Tue Aug 28 23:21:11 2012] Mean detx,y = (-636.96, -2660.69) 
[Tue Aug 28 23:21:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 23:21:19 2012] grppha failed
[Tue Aug 28 23:21:19 2012] Setting source spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src16_src.pi.gz
[Tue Aug 28 23:21:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Aug 28 23:26:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 23:26:54 2012] rmf not generated due to insufficient counts
[Tue Aug 28 23:27:47 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:27:48 2012] Error reading totcts from fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src16_src.pi.gz
[Tue Aug 28 23:27:48 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:27:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 23:27:51 2012] xmm0008620701/analysis//spectral/fullrun_mos2_xmm0008620701_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete