[Tue Aug 28 05:44:16 2012] Detection parameters:
  Position = (296.2, 187.5) = 17 2 3.37 -30 3 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.6 +/- 13.4
  Background counts = 43.5
  Rate = 0.003 +/- 0.0007

[Tue Aug 28 05:44:16 2012] Off-axis axis estimate = 8.04'
[Tue Aug 28 06:08:17 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:08:17 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Tue Aug 28 06:08:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890
[Tue Aug 28 06:08:17 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.45"
[Tue Aug 28 06:40:38 2012] fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_src9.ximg exists
[Tue Aug 28 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_src9.csv
[Tue Aug 28 06:40:38 2012] fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Aug 28 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_src9.csv
[Tue Aug 28 06:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 06:40:38 2012] fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Aug 28 06:40:38 2012] fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Aug 28 06:40:38 2012] Fit fullrun_mos1_xmm0008620701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Aug 28 17:10:40 2012] Source 12 is offset by -5.930613 and -4.286153 pixels which is larger than
2 X fitted extent = 1.146915 x 1.146915, not incorporating fit results
[Tue Aug 28 17:10:40 2012] Spatial fit model total counts = 715.633000, observed total counts = 715.000000
[Tue Aug 28 17:10:40 2012] Offset between fit and detection position for source 12 = 1.131394 pixels
[Tue Aug 28 17:10:40 2012] Warning, changing simple spatial fit ID from 9 to 6
[Tue Aug 28 17:10:40 2012] 643.293300 total counts/ 617.530000 bgd. counts: snr = 1.036746
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.131394 pixels
  Position = (296.9, 186.6) = 17 2 3.14 -30 3 21.8
  Extent = 5.4 (3.7-7.5)", rotation angle = 0
  Source counts = 25.8 +/- 25.4
  Background counts = 617.5
  Rate = 0.0009 +/- 0.0009
  Deleting source due to low Poisson probability