[Fri May 18 23:52:10 2012] Detection parameters:
  Position = (264.8, 236.0) = 12 51 50.41 27 29 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 12.6
  Background counts = 29.1
  Rate = 0.004 +/- 0.0006

[Fri May 18 23:52:11 2012] Off-axis axis estimate = 5.14'
[Fri May 18 23:55:01 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:55:01 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Fri May 18 23:55:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.795
[Fri May 18 23:55:01 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 9.00"
[Sat May 19 03:18:33 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src77.ximg exists
[Sat May 19 03:18:33 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src77_1.ximg exists
[Sat May 19 03:18:33 2012] Fit fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src77 appears to have run properly
[Sat May 19 03:18:35 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sat May 19 03:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src77.csv
[Sat May 19 03:18:35 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sat May 19 03:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src77.csv
[Sat May 19 03:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 05:27:28 2012] Source 79 is offset by -5.255929 and -0.971610 pixels which is larger than
2 X fitted extent = 1.008322 x 1.008322, not incorporating fit results
[Sat May 19 05:27:28 2012] Source 79 is offset by -1.961653 and -3.265886 pixels which is larger than
2 X fitted extent = 1.278460 x 1.278460, not incorporating fit results
[Sat May 19 05:27:29 2012] Warning, spatial fit 77 centroid is now closest to src. 39
[Sat May 19 05:27:29 2012] Vigneting correction estimate = 1.000000
[Sat May 19 05:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 05:27:29 2012] Assessing source extent using major
[Sat May 19 05:27:29 2012] Source does appear to be extended
[Sat May 19 05:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 05:27:54 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat May 19 05:27:54 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Sat May 19 05:27:54 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.795
[Sat May 19 05:27:54 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 9.00"
[Sat May 19 08:47:00 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src72.ximg exists
[Sat May 19 08:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src72.csv
[Sat May 19 08:47:00 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src72_1.ximg exists
[Sat May 19 08:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src72.csv
[Sat May 19 08:47:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:47:01 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sat May 19 08:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sat May 19 08:47:01 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sat May 19 08:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sat May 19 08:47:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 10:07:28 2012] Source 79 is offset by -5.255906 and -0.971610 pixels which is larger than
2 X fitted extent = 1.008322 x 1.008322, not incorporating fit results
[Sat May 19 10:07:28 2012] Source 79 is offset by 7.214535 and 6.647631 pixels which is larger than
2 X fitted extent = 4.391877 x 3.333802, not incorporating fit results
[Sat May 19 10:07:28 2012] Vigneting correction estimate = 1.000000
[Sat May 19 10:07:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 10:07:28 2012] Assessing source extent using major
[Sat May 19 10:07:28 2012] Source does appear to be extended
[Sat May 19 10:07:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 10:08:03 2012] XMMSAS src. selection expression = ellipse(22990.028198, 20480.175903, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 10:08:03 2012] Writing source region out to fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src79_src.reg
[Sat May 19 10:08:03 2012] Extracting stamp from image fullrun_pn_xmm0008220201_pi300-10000_cl_sm2.00.img.gz, (227, 198) - (302, 273)
[Sat May 19 10:08:03 2012] XMMSAS bgd. selection expression = annulus(22990.028198, 20480.175903, 1087.500000, 2175.000000, X, Y) && !ellipse(25214.084800, 24020.133200, 1447.168842, 1447.168842, 0.000000, X, Y) && !ellipse(25102.579254, 20215.939423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.249725, 21227.672852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24069.199371, 19769.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.197906, 18061.591568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24718.268200, 21971.490000, 933.552027, 933.552027, 0.000000, X, Y) && !ellipse(24698.120056, 21446.864105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22154.477560, 19645.203600, 365.180011, 365.180011, 0.000000, X, Y)
[Sat May 19 10:08:03 2012] Writing fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src79.gif
[Sat May 19 12:08:59 2012] Mean detx,y = (3463.95, -2735.91) 
[Sat May 19 12:09:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 12:09:52 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 12:09:52 2012] Setting source spectrum file to fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat May 19 12:09:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Sat May 19 14:49:06 2012] Not generating rmf since there are only 94 counts
[Sat May 19 14:49:06 2012] rmf not generated due to insufficient counts
[Sat May 19 16:04:24 2012] Updating aperture counts using extracted products
[Sat May 19 16:04:24 2012] Error reading totcts from fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat May 19 16:04:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 16:04:25 2012] Using photon index=1.80, rate=0.00436, arf fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src79.arf
[Sat May 19 16:04:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 16:04:25 2012] Updating source flux to 3.2e-14
[Sat May 19 16:06:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting