[Fri May 18 23:52:10 2012] Detection parameters:
  Position = (233.6, 362.9) = 12 52 0.66 27 38 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 12.6
  Background counts = 27.2
  Rate = 0.003 +/- 0.0006

[Fri May 18 23:52:11 2012] Off-axis axis estimate = 6.63'
[Fri May 18 23:55:01 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:55:01 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Fri May 18 23:55:01 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.999
[Fri May 18 23:55:01 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 9.74"
[Sat May 19 03:18:33 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src52.ximg exists
[Sat May 19 03:18:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src52.csv
[Sat May 19 03:18:33 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src52_1.ximg exists
[Sat May 19 03:18:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src52.csv
[Sat May 19 03:18:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 03:18:34 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sat May 19 03:18:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sat May 19 03:18:34 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sat May 19 03:18:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sat May 19 03:18:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 05:27:28 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 12.339608 pixels away
[Sat May 19 05:27:29 2012] Vigneting correction estimate = 1.000000
[Sat May 19 05:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 05:27:29 2012] Assessing source extent using major
[Sat May 19 05:27:29 2012] Source does appear to be extended
[Sat May 19 05:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 05:27:53 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sat May 19 05:27:53 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Sat May 19 05:27:53 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.999
[Sat May 19 05:27:53 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 9.74"
[Sat May 19 08:46:59 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src50.ximg exists
[Sat May 19 08:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src50.csv
[Sat May 19 08:46:59 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat May 19 08:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src50.csv
[Sat May 19 08:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:47:01 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat May 19 08:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat May 19 08:47:01 2012] fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat May 19 08:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat May 19 08:47:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 10:07:28 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 40.015466 pixels away
[Sat May 19 10:07:28 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 28.089831 pixels away
[Sat May 19 10:07:28 2012] Spatial fit model total counts = 1443.140000, observed total counts = 1448.000000
[Sat May 19 10:07:28 2012] Offset between fit and detection position for source 53 = 3.272419 pixels
[Sat May 19 10:07:28 2012] Warning, changing simple spatial fit ID from 50 to 49
[Sat May 19 10:07:28 2012] 1301.146000 total counts/ 966.611000 bgd. counts: snr = 10.760085
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 3.272419 pixels
  Position = (232.1, 360.0) = 12 52 1.15 27 38 29.0
  Extent = 37.9 (32.3-75.9)", rotation angle = 0
  Source counts = 334.5 +/- 36.1
  Background counts = 966.6
  Rate = 0.009 +/- 0.001
[Sat May 19 10:07:28 2012] Vigneting correction estimate = 1.000000
[Sat May 19 10:07:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 10:07:28 2012] Assessing source extent using major axis lower bound
[Sat May 19 10:07:28 2012] Source does appear to be extended
[Sat May 19 10:07:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 10:07:28 2012] Source is confused with source 51
[Sat May 19 10:08:02 2012] XMMSAS src. selection expression = ellipse(20141.312000, 31269.980000, 2276.556066, 2276.556066, 0.000000, X, Y)
[Sat May 19 10:08:02 2012] Writing source region out to fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src53_src.reg
[Sat May 19 10:08:02 2012] Extracting stamp from image fullrun_pn_xmm0008220201_pi300-10000_cl_sm2.00.img.gz, (101, 229) - (363, 491)
[Sat May 19 10:08:02 2012] XMMSAS bgd. selection expression = annulus(20141.312000, 31269.980000, 3794.260109, 7588.520218, X, Y) && !ellipse(25214.084800, 24020.133200, 1447.168842, 1447.168842, 0.000000, X, Y) && !ellipse(27183.304458, 28841.645000, 450.916813, 450.916813, 0.000000, X, Y) && !ellipse(21000.769888, 36778.649719, 1821.232052, 401.646369, 72.597802, X, Y) && !ellipse(21296.708923, 36052.230713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18340.124054, 35880.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21520.300000, 34939.536000, 1662.720048, 1662.720048, 0.000000, X, Y) && !ellipse(21836.241600, 34260.782000, 992.328029, 992.328029, 0.000000, X, Y) && !ellipse(22124.968440, 33406.195600, 2793.584080, 466.778413, 72.024000, X, Y) && !ellipse(22058.612800, 33721.506000, 1219.976035, 1219.976035, 0.000000, X, Y) && !ellipse(22170.803400, 33304.372000, 1396.792040, 1396.792040, 0.000000, X, Y) && !ellipse(22303.796800, 32910.864000, 1331.816038, 1331.816038, 0.000000, X, Y) && !ellipse(22493.968320, 32246.938000, 1404.280040, 368.145611, 250.107000, X, Y) && !ellipse(22771.444683, 31469.618050, 1404.280040, 373.445249, 250.941626, X, Y) && !ellipse(22620.256000, 31935.634000, 879.064025, 879.064025, 0.000000, X, Y) && !ellipse(22962.925987, 30866.092011, 1404.280040, 390.912516, 70.039377, X, Y) && !ellipse(28735.472199, 30166.801139, 1322.216038, 440.049592, 67.516387, X, Y) && !ellipse(23408.392800, 29498.941600, 1322.216038, 413.431212, 69.450500, X, Y) && !ellipse(14096.428772, 28764.029266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.003800, 28485.038400, 1241.216036, 435.819213, 71.946300, X, Y) && !ellipse(23016.651620, 27558.310200, 429.276012, 429.276012, 0.000000, X, Y) && !ellipse(24240.648000, 26646.504000, 1123.408032, 1123.408032, 0.000000, X, Y) && !ellipse(14693.465210, 22999.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20817.932800, 37361.805328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21697.018000, 31652.624600, 1517.704044, 1517.704044, 0.000000, X, Y) && !ellipse(27642.698883, 31313.080414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23998.823200, 31438.307000, 640.214418, 640.214418, 0.000000, X, Y) && !ellipse(23125.890000, 30365.611200, 1367.800039, 424.685612, 71.145000, X, Y) && !ellipse(26425.102448, 29587.035248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23682.088658, 28693.411234, 1191.144034, 413.198365, 71.352829, X, Y) && !ellipse(23925.544000, 27429.534000, 2246.816065, 2246.816065, 0.000000, X, Y) && !ellipse(17267.453600, 27373.227200, 426.009612, 426.009612, 0.000000, X, Y) && !ellipse(24509.387299, 26130.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28257.454987, 25453.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22024.332977, 24717.270782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14781.904236, 24793.263031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19591.384933, 23979.770020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19975.884949, 23604.192230, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 10:08:02 2012] Writing fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src53.gif
[Sat May 19 11:22:23 2012] Mean detx,y = (2493.91, 8368.45) 
[Sat May 19 11:22:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 11:25:13 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 11:25:14 2012] Setting source spectrum file to fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat May 19 11:25:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat May 19 16:04:23 2012] Updating aperture counts using extracted products
[Sat May 19 16:04:23 2012] Error reading totcts from fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat May 19 16:04:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 16:04:25 2012] Using photon index=1.80, rate=0.00896, arf fullrun_pn_xmm0008220201_pi300-10000_pass1_cl_src53.arf
[Sat May 19 16:04:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 16:04:25 2012] Updating source flux to 4.2e-14
[Sat May 19 16:06:32 2012] Flag c found in src. 53 procflags, skipping spectral fitting