[Fri May 18 23:52:36 2012] Detection parameters:
  Position = (223.3, 189.1) = 12 52 3.96 27 26 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.8 +/- 14.5
  Background counts = 8.7
  Rate = 0.006 +/- 0.0007

[Fri May 18 23:52:36 2012] Off-axis axis estimate = 9.62'
[Sat May 19 03:18:35 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Sat May 19 03:18:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 03:18:35 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Sat May 19 03:18:35 2012] source mask rpix=2.6, npix_max = 38, mask sum = 28, frac = 0.736
[Sat May 19 03:18:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.24"
[Sat May 19 04:03:12 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 19 04:03:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_src2.csv
[Sat May 19 04:03:12 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 19 04:03:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_src2.csv
[Sat May 19 04:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 04:03:13 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 19 04:03:13 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 19 04:03:13 2012] Fit fullrun_mos1_xmm0008220201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 19 05:27:34 2012] Spatial fit model total counts = 184.897000, observed total counts = 191.000000
[Sat May 19 05:27:34 2012] Offset between fit and detection position for source 30 = 1.086175 pixels
[Sat May 19 05:27:34 2012] 188.643500 total counts/ 139.097000 bgd. counts: snr = 4.201014
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.086175 pixels
  Position = (222.4, 189.5) = 12 52 4.28 27 26 7.6
  Extent = 5.8 (3.5-8.7)", rotation angle = 0
  Source counts = 49.5 +/- 13.7
  Background counts = 139.1
  Rate = 0.001 +/- 0.0003
[Sat May 19 05:27:34 2012] Vigneting correction estimate = 1.000000
[Sat May 19 05:27:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 05:27:34 2012] Assessing source extent using major axis lower bound
[Sat May 19 05:27:34 2012] Source does appear to be extended
[Sat May 19 05:27:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 08:47:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 08:47:01 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Sat May 19 08:47:01 2012] source mask rpix=1.3, npix_max = 13, mask sum = 8, frac = 0.598
[Sat May 19 08:47:01 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.78"
[Sat May 19 09:18:41 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 19 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_src2.csv
[Sat May 19 09:18:41 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 19 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_src2.csv
[Sat May 19 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 09:18:41 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 19 09:18:41 2012] fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 19 09:18:41 2012] Fit fullrun_mos1_xmm0008220201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 19 10:07:34 2012] Spatial fit model total counts = 178.576000, observed total counts = 185.000000
[Sat May 19 10:07:34 2012] Offset between fit and detection position for source 30 = 0.091429 pixels
[Sat May 19 10:07:34 2012] 182.749500 total counts/ 132.801000 bgd. counts: snr = 4.334328
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.091429 pixels
  Position = (222.4, 189.5) = 12 52 4.28 27 26 7.2
  Extent = 5.8 (3.7-9.0)", rotation angle = 0
  Source counts = 49.9 +/- 13.5
  Background counts = 132.8
  Rate = 0.001 +/- 0.0003
[Sat May 19 10:07:34 2012] Vigneting correction estimate = 1.000000
[Sat May 19 10:07:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 10:07:34 2012] Assessing source extent using major axis lower bound
[Sat May 19 10:07:34 2012] Source does appear to be extended
[Sat May 19 10:07:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 14:56:55 2012] XMMSAS src. selection expression = ellipse(19295.988800, 16433.704000, 345.906010, 345.906010, 0.000000, X, Y)
[Sat May 19 14:56:55 2012] Writing source region out to fullrun_mos1_xmm0008220201_pi300-10000_pass1_cl_src30_src.reg
[Sat May 19 14:56:55 2012] Extracting stamp from image fullrun_mos1_xmm0008220201_pi300-10000_cl_sm2.00.img.gz, (202, 170) - (242, 209)
[Sat May 19 14:56:55 2012] XMMSAS bgd. selection expression = annulus(19295.988800, 16433.704000, 576.510017, 1153.020033, X, Y) && !ellipse(18544.006400, 17852.815200, 469.490414, 469.490414, 0.000000, X, Y)
[Sat May 19 14:56:55 2012] Writing fullrun_mos1_xmm0008220201_pi300-10000_pass1_cl_src30.gif
[Sat May 19 15:01:29 2012] Mean detx,y = (5552.04, 7844.73) 
[Sat May 19 15:01:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 15:01:43 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 15:01:43 2012] Setting source spectrum file to fullrun_mos1_xmm0008220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May 19 15:01:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0008220201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat May 19 15:19:22 2012] Not generating rmf since there are only 49 counts
[Sat May 19 15:19:22 2012] rmf not generated due to insufficient counts
[Sat May 19 16:04:26 2012] Updating aperture counts using extracted products
[Sat May 19 16:04:26 2012] Error reading totcts from fullrun_mos1_xmm0008220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May 19 16:04:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 16:04:26 2012] Using photon index=1.80, rate=0.00126, arf fullrun_mos1_xmm0008220201_pi300-10000_pass1_cl_src30.arf
[Sat May 19 16:04:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 16:04:26 2012] Updating source flux to 3e-14
[Sat May 19 16:04:30 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting