[Fri Jul 13 08:04:44 2012] Detection parameters:
  Position = (280.9, 340.9) = 16 28 46.52 39 34 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.0 +/- 30.8
  Background counts = 290.0
  Rate = 0.04 +/- 0.005

[Fri Jul 13 08:04:44 2012] Off-axis axis estimate = 3.33'
[Fri Jul 13 08:07:13 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:07:13 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Jul 13 08:07:13 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.718
[Fri Jul 13 08:07:13 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.10"
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 13 12:28:00 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 13 12:28:01 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jul 13 15:48:16 2012] Spatial fit model total counts = 4261.180000, observed total counts = 4207.000000
[Fri Jul 13 15:48:16 2012] Offset between fit and detection position for source 7 = 8.014266 pixels
[Fri Jul 13 15:48:16 2012] 4262.209000 total counts/ 3957.800000 bgd. counts: snr = 4.838721
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 8.014266 pixels
  Position = (275.7, 347.0) = 16 28 48.48 39 35 4.7
  Extent = 16.2 (16.2-32.4)", rotation angle = 0
  Source counts = 304.4 +/- 65.3
  Background counts = 3957.8
  Rate = 0.05 +/- 0.01
[Fri Jul 13 15:48:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:16 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 15:48:16 2012] Source does appear to be extended
[Fri Jul 13 15:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 15:48:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 15:48:38 2012] Initial guess for spatial extent in simple fitting = 16.19"
[Fri Jul 13 15:48:38 2012] source mask rpix=3.7, npix_max = 71, mask sum = 70, frac = 0.982
[Fri Jul 13 15:48:38 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 16.19"
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src6.csv
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src6.csv
[Fri Jul 13 17:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 13 17:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:54:11 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Fri Jul 13 20:54:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 20:54:11 2012] Source does appear to be extended
[Fri Jul 13 20:54:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:54:29 2012] XMMSAS src. selection expression = ellipse(23935.242000, 30143.192000, 971.460028, 971.460028, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing source region out to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src7_src.reg
[Fri Jul 13 20:54:29 2012] Extracting stamp from image fullrun_pn_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (220, 291) - (332, 403)
[Fri Jul 13 20:54:29 2012] XMMSAS bgd. selection expression = annulus(23935.242000, 30143.192000, 1619.100047, 3238.200093, X, Y) && !ellipse(26313.109290, 27712.605600, 1074.672031, 1074.672031, 0.000000, X, Y) && !ellipse(27049.038000, 26802.652000, 2360.776068, 2360.776068, 0.000000, X, Y) && !ellipse(25552.136780, 28939.343506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.474000, 26019.550000, 1184.720034, 1184.720034, 0.000000, X, Y) && !ellipse(27127.045000, 29818.324000, 731.308821, 731.308821, 0.000000, X, Y) && !ellipse(26534.964905, 29955.396667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24093.997345, 27005.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.285800, 25634.242000, 2392.000069, 2392.000069, 0.000000, X, Y) && !ellipse(27912.075500, 29793.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26601.837128, 30830.244751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.662000, 31017.688000, 1340.352039, 1340.352039, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src7.gif
[Fri Jul 13 21:23:00 2012] Mean detx,y = (-1358.26, -3062.76) 
[Fri Jul 13 21:23:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 21:23:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 21:23:41 2012] Setting source spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 13 21:23:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jul 14 16:01:42 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:42 2012] Error reading totcts from fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jul 14 16:01:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:42 2012] Using photon index=1.80, rate=0.0486, arf fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src7.arf
[Sat Jul 14 16:01:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:42 2012] Updating source flux to 1.4e-13