[Fri Jul 13 08:04:43 2012] Detection parameters:
  Position = (310.9, 304.1) = 16 28 35.24 39 31 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1358.8 +/- 56.8
  Background counts = 361.2
  Rate = 0.2 +/- 0.008

[Fri Jul 13 08:04:44 2012] Off-axis axis estimate = 0.99'
[Fri Jul 13 08:07:13 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:07:13 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Fri Jul 13 08:07:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Fri Jul 13 08:07:13 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.92"
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 13 12:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 13 12:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 12:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 13 12:28:01 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 13 15:48:16 2012] Source 2 is offset by 5.524935 and -7.051308 pixels which is larger than
2 X fitted extent = 6.366575 x 6.366575, not incorporating fit results
[Fri Jul 13 15:48:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:16 2012] Assessing source extent using major
[Fri Jul 13 15:48:16 2012] Source does appear to be extended
[Fri Jul 13 15:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:17 2012] Source is confused with source 4
[Fri Jul 13 15:48:38 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 15:48:38 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Fri Jul 13 15:48:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Fri Jul 13 15:48:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.92"
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 17:39:54 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 17:39:54 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul 13 20:54:11 2012] Source 2 is offset by 5.454268 and -6.907055 pixels which is larger than
2 X fitted extent = 6.365012 x 6.365012, not incorporating fit results
[Fri Jul 13 20:54:11 2012] Spatial fit model total counts = 13274.000000, observed total counts = 13266.000000
[Fri Jul 13 20:54:11 2012] Offset between fit and detection position for source 2 = 4.594442 pixels
[Fri Jul 13 20:54:11 2012] Warning, changing simple spatial fit ID from 2 to 4
[Fri Jul 13 20:54:11 2012] 13207.360000 total counts/ 10804.700000 bgd. counts: snr = 23.114578
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.594442 pixels
  Position = (311.5, 308.6) = 16 28 35.02 39 32 17.7
  Extent = 29.5 (29.3-29.6)", rotation angle = 0
  Source counts = 2402.7 +/- 114.9
  Background counts = 10804.7
  Rate = 0.4 +/- 0.02
[Fri Jul 13 20:54:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 20:54:11 2012] Source does appear to be extended
[Fri Jul 13 20:54:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:54:29 2012] Counts = 2402.660000, rescaling region sizes by 2.000000
[Fri Jul 13 20:54:29 2012] XMMSAS src. selection expression = ellipse(27049.038000, 26802.652000, 3541.164102, 3541.164102, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing source region out to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 13 20:54:29 2012] Extracting stamp from image fullrun_pn_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (108, 105) - (515, 512)
[Fri Jul 13 20:54:29 2012] XMMSAS bgd. selection expression = annulus(27049.038000, 26802.652000, 11803.880340, 23607.760679, X, Y) && !ellipse(26313.109290, 27712.605600, 1074.672031, 1074.672031, 0.000000, X, Y) && !ellipse(25552.136780, 28939.343506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.474000, 26019.550000, 1184.720034, 1184.720034, 0.000000, X, Y) && !ellipse(27127.045000, 29818.324000, 731.308821, 731.308821, 0.000000, X, Y) && !ellipse(26534.964905, 29955.396667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23935.242000, 30143.192000, 1295.280037, 1295.280037, 0.000000, X, Y) && !ellipse(28760.381256, 27700.236023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.848450, 27013.018860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24093.997345, 27005.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28721.214264, 25794.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.285800, 25634.242000, 2392.000069, 2392.000069, 0.000000, X, Y) && !ellipse(27725.270294, 24747.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.298000, 24387.498000, 1196.000034, 1196.000034, 0.000000, X, Y) && !ellipse(12678.021851, 37281.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27912.075500, 29793.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29033.376678, 28133.810272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19696.505508, 27247.083588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.994690, 25706.141754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.675385, 24755.211151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28131.386230, 24752.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22353.410200, 37112.802800, 1110.632032, 1110.632032, 0.000000, X, Y) && !ellipse(26601.837128, 30830.244751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.662000, 31017.688000, 1340.352039, 1340.352039, 0.000000, X, Y) && !ellipse(27466.866000, 23345.472000, 1196.000034, 1196.000034, 0.000000, X, Y) && !ellipse(29502.605316, 25603.612488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.506134, 24918.012238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26103.289001, 23961.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28107.159088, 23802.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.957001, 23709.602203, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src2.gif
[Fri Jul 13 20:58:29 2012] Mean detx,y = (142.48, 617.12) 
[Fri Jul 13 20:58:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 21:11:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 21:11:51 2012] Setting source spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 21:11:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 16:01:42 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:42 2012] Error reading totcts from fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 16:01:42 2012] No arf file for this source, not re-computing flux
[Sat Jul 14 16:05:08 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Sat Jul 14 16:05:08 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Jul 14 16:05:08 2012] Source 2 has no response, skipping