[Fri Jul 13 08:04:44 2012] Detection parameters:
  Position = (307.2, 291.1) = 16 28 36.61 39 31 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.9 +/- 38.7
  Background counts = 309.8
  Rate = 0.07 +/- 0.006

[Fri Jul 13 08:04:44 2012] Off-axis axis estimate = 0.83'
[Fri Jul 13 08:07:13 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:07:13 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Fri Jul 13 08:07:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.931
[Fri Jul 13 08:07:13 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 6.84"
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 13 12:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src13.csv
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 13 12:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src13.csv
[Fri Jul 13 12:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 13 12:28:01 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul 13 15:48:16 2012] Warning, spatial fit 13 centroid is now closest to src. 15
[Fri Jul 13 15:48:16 2012] Source 14 is offset by -6.197164 and -0.370574 pixels which is larger than
2 X fitted extent = 0.900354 x 0.900354, not incorporating fit results
[Fri Jul 13 15:48:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:17 2012] Assessing source extent using major
[Fri Jul 13 15:48:17 2012] Source does appear to be extended
[Fri Jul 13 15:48:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:17 2012] Source is confused with source 16
[Fri Jul 13 15:48:17 2012] Source is confused with source 23
[Fri Jul 13 15:48:38 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 15:48:38 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Fri Jul 13 15:48:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.931
[Fri Jul 13 15:48:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.84"
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src11.csv
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src11.csv
[Fri Jul 13 17:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 17:39:55 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul 13 17:39:55 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul 13 17:39:55 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul 13 20:54:11 2012] Source 14 is offset by -3.521187 and -5.905861 pixels which is larger than
2 X fitted extent = 1.199035 x 1.199035, not incorporating fit results
[Fri Jul 13 20:54:11 2012] Spatial fit model total counts = 7374.020000, observed total counts = 7376.000000
[Fri Jul 13 20:54:11 2012] Offset between fit and detection position for source 14 = 4.199590 pixels
[Fri Jul 13 20:54:11 2012] Warning, changing simple spatial fit ID from 11 to 13
[Fri Jul 13 20:54:11 2012] 7506.654000 total counts/ 7019.240000 bgd. counts: snr = 5.817722
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 4.199590 pixels
  Position = (308.3, 295.2) = 16 28 36.23 39 31 19.2
  Extent = 29.9 (29.9-59.8)", rotation angle = 0
  Source counts = 487.4 +/- 86.6
  Background counts = 7019.2
  Rate = 0.08 +/- 0.01
[Fri Jul 13 20:54:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 20:54:11 2012] Source does appear to be extended
[Fri Jul 13 20:54:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:54:29 2012] XMMSAS src. selection expression = ellipse(26769.285800, 25634.242000, 1794.000052, 1794.000052, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing source region out to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src14_src.reg
[Fri Jul 13 20:54:29 2012] Extracting stamp from image fullrun_pn_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (205, 192) - (411, 398)
[Fri Jul 13 20:54:29 2012] XMMSAS bgd. selection expression = annulus(26769.285800, 25634.242000, 2990.000086, 5980.000172, X, Y) && !ellipse(26313.109290, 27712.605600, 1074.672031, 1074.672031, 0.000000, X, Y) && !ellipse(27049.038000, 26802.652000, 2360.776068, 2360.776068, 0.000000, X, Y) && !ellipse(25552.136780, 28939.343506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.474000, 26019.550000, 1184.720034, 1184.720034, 0.000000, X, Y) && !ellipse(27127.045000, 29818.324000, 731.308821, 731.308821, 0.000000, X, Y) && !ellipse(26534.964905, 29955.396667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23935.242000, 30143.192000, 1295.280037, 1295.280037, 0.000000, X, Y) && !ellipse(28760.381256, 27700.236023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.848450, 27013.018860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24093.997345, 27005.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28721.214264, 25794.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.270294, 24747.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.298000, 24387.498000, 1196.000034, 1196.000034, 0.000000, X, Y) && !ellipse(27912.075500, 29793.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29033.376678, 28133.810272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.994690, 25706.141754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.675385, 24755.211151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28131.386230, 24752.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26601.837128, 30830.244751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.662000, 31017.688000, 1340.352039, 1340.352039, 0.000000, X, Y) && !ellipse(27466.866000, 23345.472000, 1196.000034, 1196.000034, 0.000000, X, Y) && !ellipse(29502.605316, 25603.612488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.506134, 24918.012238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26103.289001, 23961.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28107.159088, 23802.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.957001, 23709.602203, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src14.gif
[Fri Jul 13 21:26:13 2012] Mean detx,y = (-221.31, 1614.13) 
[Fri Jul 13 21:26:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 21:27:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 21:27:02 2012] Setting source spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jul 13 21:27:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jul 14 16:01:42 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:42 2012] Error reading totcts from fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jul 14 16:01:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:43 2012] Using photon index=1.80, rate=0.0778, arf fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src14.arf
[Sat Jul 14 16:01:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:43 2012] Updating source flux to 1.7e-13
[Sat Jul 14 16:05:08 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Sat Jul 14 16:05:08 2012] Flag c found in src. 14 procflags, skipping spectral fitting