[Fri Jul 13 08:04:44 2012] Detection parameters:
  Position = (329.6, 311.1) = 16 28 28.19 39 32 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 429.4 +/- 38.4
  Background counts = 331.9
  Rate = 0.06 +/- 0.006

[Fri Jul 13 08:04:44 2012] Off-axis axis estimate = 2.44'
[Fri Jul 13 08:07:13 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:07:13 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Jul 13 08:07:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Fri Jul 13 08:07:13 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.65"
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jul 13 12:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src9.csv
[Fri Jul 13 12:28:00 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jul 13 12:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src9.csv
[Fri Jul 13 12:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jul 13 12:28:01 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jul 13 12:28:01 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jul 13 15:48:16 2012] Source 10 is offset by -8.573374 and -1.868841 pixels which is larger than
2 X fitted extent = 0.899756 x 0.899756, not incorporating fit results
[Fri Jul 13 15:48:16 2012] Source 10 is offset by 7.657453 and -3.105252 pixels which is larger than
2 X fitted extent = 1.366612 x 1.366612, not incorporating fit results
[Fri Jul 13 15:48:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:16 2012] Assessing source extent using major
[Fri Jul 13 15:48:16 2012] Source does appear to be extended
[Fri Jul 13 15:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:38 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 15:48:38 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Jul 13 15:48:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Fri Jul 13 15:48:38 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.65"
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src8.csv
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jul 13 17:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src8.csv
[Fri Jul 13 17:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 17:39:54 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jul 13 17:39:55 2012] fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jul 13 17:39:55 2012] Fit fullrun_pn_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jul 13 20:54:11 2012] Source 10 is offset by -6.408064 and 1.190012 pixels which is larger than
2 X fitted extent = 5.782437 x 5.782437, not incorporating fit results
[Fri Jul 13 20:54:11 2012] Source 10 is offset by 0.547483 and 6.064631 pixels which is larger than
2 X fitted extent = 1.025913 x 1.025913, not incorporating fit results
[Fri Jul 13 20:54:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:11 2012] Assessing source extent using major
[Fri Jul 13 20:54:11 2012] Source does appear to be extended
[Fri Jul 13 20:54:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:54:11 2012] Source is confused with source 2
[Fri Jul 13 20:54:29 2012] XMMSAS src. selection expression = ellipse(28628.848450, 27013.018860, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing source region out to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src10_src.reg
[Fri Jul 13 20:54:29 2012] Extracting stamp from image fullrun_pn_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (292, 274) - (367, 349)
[Fri Jul 13 20:54:29 2012] XMMSAS bgd. selection expression = annulus(28628.848450, 27013.018860, 1087.500000, 2175.000000, X, Y) && !ellipse(26313.109290, 27712.605600, 1074.672031, 1074.672031, 0.000000, X, Y) && !ellipse(27049.038000, 26802.652000, 2360.776068, 2360.776068, 0.000000, X, Y) && !ellipse(27768.474000, 26019.550000, 1184.720034, 1184.720034, 0.000000, X, Y) && !ellipse(27127.045000, 29818.324000, 731.308821, 731.308821, 0.000000, X, Y) && !ellipse(26534.964905, 29955.396667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.381256, 27700.236023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28721.214264, 25794.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.285800, 25634.242000, 2392.000069, 2392.000069, 0.000000, X, Y) && !ellipse(27725.270294, 24747.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.298000, 24387.498000, 1196.000034, 1196.000034, 0.000000, X, Y) && !ellipse(27912.075500, 29793.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29033.376678, 28133.810272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.675385, 24755.211151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28131.386230, 24752.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.605316, 25603.612488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.506134, 24918.012238, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 20:54:29 2012] Writing fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src10.gif
[Fri Jul 13 21:24:22 2012] Mean detx,y = (1811.15, 1318.79) 
[Fri Jul 13 21:24:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 21:24:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 21:24:45 2012] Setting source spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 13 21:24:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jul 14 11:07:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 11:07:35 2012] rmf not generated due to insufficient counts
[Sat Jul 14 16:01:42 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:42 2012] Error reading totcts from fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul 14 16:01:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:43 2012] Using photon index=1.80, rate=0.0618, arf fullrun_pn_xmm0008030601_pi300-10000_pass1_cl_src10.arf
[Sat Jul 14 16:01:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:43 2012] Updating source flux to 1.5e-13
[Sat Jul 14 16:05:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting