[Fri Jul 13 08:05:32 2012] Detection parameters:
  Position = (146.4, 428.7) = 16 29 37.21 39 41 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.4 +/- 8.3
  Background counts = 5.2
  Rate = 0.006 +/- 0.001

[Fri Jul 13 08:05:32 2012] Off-axis axis estimate = 14.51'
[Fri Jul 13 14:24:13 2012] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 14:24:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 14:24:13 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Fri Jul 13 14:24:13 2012] source mask rpix=3.1, npix_max = 53, mask sum = 35, frac = 0.658
[Fri Jul 13 14:24:13 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 13.69"
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src26.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src26.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src26.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:29 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 19.022289 pixels away
[Fri Jul 13 15:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:29 2012] Assessing source extent using major
[Fri Jul 13 15:48:29 2012] Source does appear to be extended
[Fri Jul 13 15:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:29 2012] Deleting source due to low Poisson probability 0.8