[Fri Jul 13 08:05:32 2012] Detection parameters:
  Position = (329.6, 282.6) = 16 28 28.21 39 30 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.7 +/- 18.5
  Background counts = 121.2
  Rate = 0.01 +/- 0.003

[Fri Jul 13 08:05:32 2012] Off-axis axis estimate = 2.53'
[Fri Jul 13 14:24:13 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 14:24:13 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Jul 13 14:24:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.068
[Fri Jul 13 14:24:13 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.70"
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src21.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src21.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:29 2012] Spatial fit model total counts = 1664.530000, observed total counts = 1488.000000
[Fri Jul 13 15:48:29 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 15:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:29 2012] Assessing source extent using major
[Fri Jul 13 15:48:29 2012] Source does appear to be extended
[Fri Jul 13 15:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:29 2012] Deleting source due to low Poisson probability 1.0