[Fri Jul 13 08:05:32 2012] Detection parameters:
  Position = (301.3, 290.0) = 16 28 38.86 39 30 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.1 +/- 24.4
  Background counts = 146.0
  Rate = 0.02 +/- 0.003

[Fri Jul 13 08:05:32 2012] Off-axis axis estimate = 0.64'
[Fri Jul 13 14:24:13 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 14:24:13 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Fri Jul 13 14:24:13 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Fri Jul 13 14:24:13 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 6.75"
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src12.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src12.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jul 13 15:48:06 2012] Fit fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jul 13 15:48:29 2012] Source 27 is offset by 5.162115 and -6.572281 pixels which is larger than
2 X fitted extent = 1.076092 x 1.076092, not incorporating fit results
[Fri Jul 13 15:48:29 2012] Spatial fit model total counts = 1697.130000, observed total counts = 1695.000000
[Fri Jul 13 15:48:29 2012] Offset between fit and detection position for source 27 = 5.300058 pixels
[Fri Jul 13 15:48:29 2012] Warning, changing simple spatial fit ID from 12 to 17
[Fri Jul 13 15:48:29 2012] 1745.490000 total counts/ 1684.900000 bgd. counts: snr = 1.476094
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 5.300058 pixels
  Position = (298.1, 294.3) = 16 28 40.06 39 31 15.1
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 60.6 +/- 41.8
  Background counts = 1684.9
  Rate = 0.008 +/- 0.005
  Deleting source due to low Poisson probability