[Fri Jul 13 08:05:32 2012] Detection parameters:
  Position = (327.0, 296.1) = 16 28 29.18 39 31 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.6 +/- 23.4
  Background counts = 149.2
  Rate = 0.02 +/- 0.003

[Fri Jul 13 08:05:32 2012] Off-axis axis estimate = 2.08'
[Fri Jul 13 14:24:13 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 14:24:13 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Fri Jul 13 14:24:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Fri Jul 13 14:24:13 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.47"
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src15.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src15.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:29 2012] Warning, spatial fit 15 centroid is now closest to src. 25
[Fri Jul 13 15:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:29 2012] Assessing source extent using major
[Fri Jul 13 15:48:29 2012] Source does appear to be extended
[Fri Jul 13 15:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:29 2012] Source is confused with source 25
[Fri Jul 13 19:00:18 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 19:00:18 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Fri Jul 13 19:00:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Fri Jul 13 19:00:18 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.47"
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul 13 20:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src13.csv
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul 13 20:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src13.csv
[Fri Jul 13 20:54:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:54:03 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 13 20:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 13 20:54:03 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 13 20:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 13 20:54:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:54:20 2012] Source 23 is offset by 4.031881 and -1.785281 pixels which is larger than
2 X fitted extent = 1.958722 x 1.958722, not incorporating fit results
[Fri Jul 13 20:54:20 2012] Warning, spatial fit 13 centroid is now closest to src. 7
[Fri Jul 13 20:54:20 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:20 2012] Assessing source extent using major
[Fri Jul 13 20:54:20 2012] Source does appear to be extended
[Fri Jul 13 20:54:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 15:16:11 2012] XMMSAS src. selection expression = ellipse(28401.641663, 25707.928589, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 15:16:11 2012] Writing source region out to fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src23_src.reg
[Sat Jul 14 15:16:11 2012] Extracting stamp from image fullrun_mos2_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (290, 259) - (365, 334)
[Sat Jul 14 15:16:11 2012] XMMSAS bgd. selection expression = annulus(28401.641663, 25707.928589, 1087.500000, 2175.000000, X, Y) && !ellipse(26254.061000, 27710.830600, 964.184028, 964.184028, 0.000000, X, Y) && !ellipse(27434.844604, 27893.362854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.042000, 28387.836000, 1250.680036, 1250.680036, 0.000000, X, Y) && !ellipse(27748.002655, 26787.962646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26750.656830, 25711.579254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.002655, 26321.030609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27076.946000, 25247.558000, 1085.888031, 1085.888031, 0.000000, X, Y) && !ellipse(28824.866608, 25542.135284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.651794, 26477.648132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28968.912567, 28049.226349, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 15:16:11 2012] Writing fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src23.gif
[Sat Jul 14 15:23:46 2012] Mean detx,y = (-1125.22, -2597.54) 
[Sat Jul 14 15:23:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:23:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:23:56 2012] Setting source spectrum file to fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jul 14 15:23:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jul 14 16:01:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 16:01:01 2012] rmf not generated due to insufficient counts
[Sat Jul 14 16:01:44 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:44 2012] Error reading totcts from fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jul 14 16:01:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:44 2012] Using photon index=1.80, rate=0.0174, arf fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src23.arf
[Sat Jul 14 16:01:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:44 2012] Updating source flux to 1.7e-13
[Sat Jul 14 16:03:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting