[Fri Jul 13 08:05:32 2012] Detection parameters:
  Position = (304.8, 279.7) = 16 28 37.51 39 30 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.9 +/- 19.7
  Background counts = 118.5
  Rate = 0.01 +/- 0.003

[Fri Jul 13 08:05:32 2012] Off-axis axis estimate = 1.43'
[Fri Jul 13 14:24:13 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 14:24:13 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Fri Jul 13 14:24:13 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Fri Jul 13 14:24:13 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.15"
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src23.csv
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jul 13 15:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src23.csv
[Fri Jul 13 15:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jul 13 15:48:06 2012] Fit fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Jul 13 15:48:29 2012] Spatial fit model total counts = 1647.880000, observed total counts = 1647.000000
[Fri Jul 13 15:48:29 2012] Offset between fit and detection position for source 15 = 5.427470 pixels
[Fri Jul 13 15:48:29 2012] 1698.601000 total counts/ 1553.540000 bgd. counts: snr = 3.680353
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 5.427470 pixels
  Position = (301.9, 275.2) = 16 28 38.62 39 29 52.1
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 145.1 +/- 41.2
  Background counts = 1553.5
  Rate = 0.02 +/- 0.005
[Fri Jul 13 15:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 15:48:29 2012] Source does appear to be extended
[Fri Jul 13 15:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 19:00:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 19:00:18 2012] Initial guess for spatial extent in simple fitting = 14.29"
[Fri Jul 13 19:00:18 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.117
[Fri Jul 13 19:00:18 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 14.29"
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jul 13 20:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src17.csv
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jul 13 20:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src17.csv
[Fri Jul 13 20:54:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:54:03 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul 13 20:54:03 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul 13 20:54:03 2012] Fit fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jul 13 20:54:20 2012] Spatial fit model total counts = 2079.500000, observed total counts = 2080.000000
[Fri Jul 13 20:54:20 2012] Offset between fit and detection position for source 15 = 3.374102 pixels
[Fri Jul 13 20:54:20 2012] 2134.404800 total counts/ 2073.050000 bgd. counts: snr = 1.347546
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.374102 pixels
  Position = (303.9, 277.9) = 16 28 37.88 39 30 3.9
  Extent = 9.2 (3.6-17.6)", rotation angle = 0
  Source counts = 61.4 +/- 46.2
  Background counts = 2073.1
  Rate = 0.008 +/- 0.006
  Deleting source due to low Poisson probability