[Fri Jul 13 08:05:31 2012] Detection parameters:
  Position = (302.4, 319.0) = 16 28 38.44 39 33 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2963.2 +/- 71.3
  Background counts = 192.3
  Rate = 0.4 +/- 0.009

[Fri Jul 13 08:05:32 2012] Off-axis axis estimate = 1.52'
[Fri Jul 13 14:24:12 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 14:24:12 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Fri Jul 13 14:24:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.079
[Fri Jul 13 14:24:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Fri Jul 13 15:48:05 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 15:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 15:48:05 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 15:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 15:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 15:48:06 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 15:48:06 2012] Fit fullrun_mos2_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 15:48:29 2012] Spatial fit model total counts = 10317.300000, observed total counts = 10292.000000
[Fri Jul 13 15:48:29 2012] Offset between fit and detection position for source 1 = 0.098261 pixels
[Fri Jul 13 15:48:29 2012] 10390.190000 total counts/ 8004.220000 bgd. counts: snr = 26.668923
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.098261 pixels
  Position = (302.3, 319.1) = 16 28 38.46 39 33 3.1
  Extent = 12.1 (10.9-13.5)", rotation angle = 0
  Source counts = 2386.0 +/- 101.9
  Background counts = 8004.2
  Rate = 0.3 +/- 0.01
[Fri Jul 13 15:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 15:48:29 2012] Source does appear to be extended
[Fri Jul 13 15:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 19:00:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 19:00:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 19:00:18 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Fri Jul 13 19:00:18 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Fri Jul 13 19:00:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.05"
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 20:54:02 2012] Fit fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 20:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 13 20:54:02 2012] fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 20:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 13 20:54:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:54:20 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Jul 13 20:54:20 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:20 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 20:54:20 2012] Source does appear to be extended
[Fri Jul 13 20:54:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 15:16:11 2012] Counts = 2385.970000, rescaling region sizes by 2.000000
[Sat Jul 14 15:16:11 2012] XMMSAS src. selection expression = ellipse(26254.061000, 27710.830600, 1446.276042, 1446.276042, 0.000000, X, Y)
[Sat Jul 14 15:16:11 2012] Writing source region out to fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 15:16:11 2012] Extracting stamp from image fullrun_mos2_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (219, 236) - (385, 402)
[Sat Jul 14 15:16:11 2012] XMMSAS bgd. selection expression = annulus(26254.061000, 27710.830600, 4820.920139, 9641.840277, X, Y) && !ellipse(27434.844604, 27893.362854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.042000, 28387.836000, 1250.680036, 1250.680036, 0.000000, X, Y) && !ellipse(27748.002655, 26787.962646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26999.903015, 28846.417480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24476.387939, 28391.045441, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24614.651245, 27503.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28285.724000, 29244.094000, 1250.664036, 1250.664036, 0.000000, X, Y) && !ellipse(26750.656830, 25711.579254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.002655, 26321.030609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25679.348000, 29492.366000, 1301.504037, 1301.504037, 0.000000, X, Y) && !ellipse(27076.946000, 25247.558000, 1085.888031, 1085.888031, 0.000000, X, Y) && !ellipse(28824.866608, 25542.135284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.651794, 26477.648132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28401.641663, 25707.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28968.912567, 28049.226349, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 15:16:11 2012] Writing fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 15:16:16 2012] Mean detx,y = (329.60, -53.93) 
[Sat Jul 14 15:16:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:20:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:20:30 2012] Setting source spectrum file to fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 15:20:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 16:01:44 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:44 2012] Error reading totcts from fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 16:01:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:44 2012] Using photon index=1.80, rate=0.311, arf fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 16:01:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:44 2012] Updating source flux to 2.9e-12
[Sat Jul 14 16:05:08 2012] Reading fit data from xmm0008030601/analysis//spectral/fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 16:05:08 2012] Spectral fit parameter nH value = 1.11381e+21
[Sat Jul 14 16:05:08 2012] Spectral fit parameter PhoIndex value = 2.25922
[Sat Jul 14 16:05:08 2012] Failed to get F(0.3-8.0) from xmm0008030601/analysis//spectral/fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 16:05:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:05:08 2012] Using Nh = 1.1e+21, photon index=2.26, rate=0.311, arf fullrun_mos2_xmm0008030601_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 16:05:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:05:08 2012] Updating source flux to 2.7e-12