[Fri Jul 13 08:05:09 2012] Detection parameters:
  Position = (313.8, 290.1) = 16 28 34.16 39 30 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.3 +/- 24.3
  Background counts = 130.9
  Rate = 0.02 +/- 0.003

[Fri Jul 13 08:05:09 2012] Off-axis axis estimate = 1.26'
[Fri Jul 13 12:28:02 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:28:02 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Fri Jul 13 12:28:02 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Fri Jul 13 12:28:02 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.06"
[Fri Jul 13 14:24:11 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jul 13 14:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src11.csv
[Fri Jul 13 14:24:11 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jul 13 14:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src11.csv
[Fri Jul 13 14:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 14:24:12 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jul 13 14:24:12 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jul 13 14:24:12 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jul 13 15:48:23 2012] Source 17 is offset by -5.735112 and -3.485053 pixels which is larger than
2 X fitted extent = 0.811531 x 0.811531, not incorporating fit results
[Fri Jul 13 15:48:23 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:23 2012] Assessing source extent using major
[Fri Jul 13 15:48:23 2012] Source does appear to be extended
[Fri Jul 13 15:48:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 17:39:55 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 17:39:55 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Fri Jul 13 17:39:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Fri Jul 13 17:39:55 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.06"
[Fri Jul 13 19:00:17 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 13 19:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src7.csv
[Fri Jul 13 19:00:17 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 13 19:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src7.csv
[Fri Jul 13 19:00:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 19:00:18 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 13 19:00:18 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 13 19:00:18 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jul 13 20:54:17 2012] Source 17 is offset by -5.735112 and 5.622349 pixels which is larger than
2 X fitted extent = 0.811531 x 0.811531, not incorporating fit results
[Fri Jul 13 20:54:17 2012] Source 17 is offset by -6.312675 and -4.249536 pixels which is larger than
2 X fitted extent = 1.401113 x 6.930161, not incorporating fit results
[Fri Jul 13 20:54:17 2012] Source 17 is offset by 0.883509 and -0.384501 pixels which is larger than
2 X fitted extent = 0.814322 x 0.814322, not incorporating fit results
[Fri Jul 13 20:54:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:17 2012] Assessing source extent using major
[Fri Jul 13 20:54:17 2012] Source does appear to be extended
[Fri Jul 13 20:54:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:58:33 2012] XMMSAS src. selection expression = ellipse(27248.371277, 25192.818390, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 12:58:33 2012] Writing source region out to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src17_src.reg
[Sat Jul 14 12:58:33 2012] Extracting stamp from image fullrun_mos1_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (276, 253) - (351, 328)
[Sat Jul 14 12:58:33 2012] XMMSAS bgd. selection expression = annulus(27248.371277, 25192.818390, 1087.500000, 2175.000000, X, Y) && !ellipse(26275.450200, 27767.807600, 1624.392047, 1624.392047, 0.000000, X, Y) && !ellipse(27531.802000, 26522.474000, 1152.464033, 1152.464033, 0.000000, X, Y) && !ellipse(28094.490000, 26991.264000, 1210.344035, 1210.344035, 0.000000, X, Y) && !ellipse(28935.772000, 26062.752000, 1209.584035, 1209.584035, 0.000000, X, Y) && !ellipse(25449.365906, 25265.393616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24639.412000, 27198.350000, 1162.624033, 1162.624033, 0.000000, X, Y) && !ellipse(26340.645966, 25278.482910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.746887, 25537.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.776978, 25091.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29301.518000, 26387.786000, 2418.168070, 2418.168070, 0.000000, X, Y)
[Sat Jul 14 12:58:33 2012] Writing fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src17.gif
[Sat Jul 14 13:07:22 2012] Mean detx,y = (-2474.72, -339.83) 
[Sat Jul 14 13:07:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:07:32 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:07:33 2012] Setting source spectrum file to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jul 14 13:07:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jul 14 14:28:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 14:28:26 2012] rmf not generated due to insufficient counts
[Sat Jul 14 16:01:43 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:43 2012] Error reading totcts from fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jul 14 16:01:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:43 2012] Using photon index=1.80, rate=0.0218, arf fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src17.arf
[Sat Jul 14 16:01:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:43 2012] Updating source flux to 2.2e-13
[Sat Jul 14 16:01:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting