[Fri Jul 13 08:05:09 2012] Detection parameters:
  Position = (295.8, 345.0) = 16 28 40.92 39 34 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.5 +/- 23.3
  Background counts = 137.6
  Rate = 0.02 +/- 0.003

[Fri Jul 13 08:05:09 2012] Off-axis axis estimate = 3.38'
[Fri Jul 13 12:28:02 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:28:02 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Fri Jul 13 12:28:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Fri Jul 13 12:28:02 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.12"
[Fri Jul 13 14:24:11 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 13 14:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src15.csv
[Fri Jul 13 14:24:11 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 13 14:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src15.csv
[Fri Jul 13 14:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 14:24:12 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 13 14:24:12 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 13 14:24:12 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jul 13 15:48:23 2012] Source 10 is offset by -6.940517 and 2.358267 pixels which is larger than
2 X fitted extent = 3.137628 x 3.137628, not incorporating fit results
[Fri Jul 13 15:48:23 2012] Source 10 is offset by -0.759230 and 4.549347 pixels which is larger than
2 X fitted extent = 0.957779 x 0.957779, not incorporating fit results
[Fri Jul 13 15:48:23 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:23 2012] Assessing source extent using major
[Fri Jul 13 15:48:23 2012] Source does appear to be extended
[Fri Jul 13 15:48:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:48:23 2012] Source is confused with source 2
[Fri Jul 13 17:39:55 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 17:39:55 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Fri Jul 13 17:39:55 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Fri Jul 13 17:39:55 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.12"
[Fri Jul 13 19:00:17 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul 13 19:00:17 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul 13 19:00:18 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src11 appears to have run properly
[Fri Jul 13 19:00:18 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul 13 19:00:18 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul 13 19:00:18 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul 13 20:54:17 2012] Source 10 is offset by -7.051184 and 2.345462 pixels which is larger than
2 X fitted extent = 3.189195 x 3.189195, not incorporating fit results
[Fri Jul 13 20:54:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:17 2012] Assessing source extent using major
[Fri Jul 13 20:54:17 2012] Source does appear to be extended
[Fri Jul 13 20:54:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:58:33 2012] XMMSAS src. selection expression = ellipse(25684.867004, 29966.229187, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 12:58:33 2012] Writing source region out to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src10_src.reg
[Sat Jul 14 12:58:33 2012] Extracting stamp from image fullrun_mos1_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (258, 307) - (333, 382)
[Sat Jul 14 12:58:33 2012] XMMSAS bgd. selection expression = annulus(25684.867004, 29966.229187, 1087.500000, 2175.000000, X, Y) && !ellipse(26275.450200, 27767.807600, 1624.392047, 1624.392047, 0.000000, X, Y) && !ellipse(26431.740000, 29236.588000, 1285.824037, 1285.824037, 0.000000, X, Y) && !ellipse(25804.186000, 28899.120000, 1239.720036, 1239.720036, 0.000000, X, Y) && !ellipse(27640.755402, 29179.676758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26990.963531, 30002.499542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.490000, 26991.264000, 1210.344035, 1210.344035, 0.000000, X, Y) && !ellipse(24639.412000, 27198.350000, 1162.624033, 1162.624033, 0.000000, X, Y) && !ellipse(25129.764099, 30126.149567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29301.518000, 26387.786000, 2418.168070, 2418.168070, 0.000000, X, Y)
[Sat Jul 14 12:58:33 2012] Writing fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src10.gif
[Sat Jul 14 13:08:23 2012] Mean detx,y = (2448.18, -268.50) 
[Sat Jul 14 13:08:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:08:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:08:39 2012] Setting source spectrum file to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul 14 13:08:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jul 14 14:44:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 14:44:27 2012] rmf not generated due to insufficient counts
[Sat Jul 14 16:01:43 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:43 2012] Error reading totcts from fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul 14 16:01:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:43 2012] Using photon index=1.80, rate=0.0189, arf fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src10.arf
[Sat Jul 14 16:01:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:43 2012] Updating source flux to 1.9e-13
[Sat Jul 14 16:01:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting