[Fri Jul 13 08:05:09 2012] Detection parameters:
  Position = (303.0, 319.0) = 16 28 38.22 39 33 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3072.3 +/- 72.2
  Background counts = 170.6
  Rate = 0.4 +/- 0.009

[Fri Jul 13 08:05:09 2012] Off-axis axis estimate = 1.53'
[Fri Jul 13 12:28:02 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:28:02 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Fri Jul 13 12:28:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Fri Jul 13 12:28:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Fri Jul 13 14:24:11 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 14:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 14:24:11 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 14:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 14:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 14:24:12 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 14:24:12 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 14:24:12 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 15:48:23 2012] Spatial fit model total counts = 10157.000000, observed total counts = 10157.000000
[Fri Jul 13 15:48:23 2012] Offset between fit and detection position for source 1 = 0.403881 pixels
[Fri Jul 13 15:48:23 2012] 10179.980000 total counts/ 7011.130000 bgd. counts: snr = 37.844927
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.403881 pixels
  Position = (302.7, 319.3) = 16 28 38.32 39 33 4.0
  Extent = 14.3 (14.1-14.4)", rotation angle = 0
  Source counts = 3168.8 +/- 100.9
  Background counts = 7011.1
  Rate = 0.4 +/- 0.01
[Fri Jul 13 15:48:23 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:48:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:48:23 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 15:48:23 2012] Source does appear to be extended
[Fri Jul 13 15:48:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 17:39:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 17:39:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 17:39:55 2012] Initial guess for spatial extent in simple fitting = 14.30"
[Fri Jul 13 17:39:55 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.977
[Fri Jul 13 17:39:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.30"
[Fri Jul 13 19:00:17 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 19:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 19:00:17 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 19:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 19:00:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 19:00:18 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 19:00:18 2012] fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 19:00:18 2012] Fit fullrun_mos1_xmm0008030601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 20:54:17 2012] Spatial fit model total counts = 19919.500000, observed total counts = 19933.000000
[Fri Jul 13 20:54:17 2012] Offset between fit and detection position for source 1 = 0.458508 pixels
[Fri Jul 13 20:54:17 2012] 19784.090000 total counts/ 13766.100000 bgd. counts: snr = 51.291571
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.458508 pixels
  Position = (302.6, 319.7) = 16 28 38.36 39 33 5.9
  Extent = 20.3 (19.2-21.7)", rotation angle = 0
  Source counts = 6018.0 +/- 140.7
  Background counts = 13766.1
  Rate = 0.8 +/- 0.02
[Fri Jul 13 20:54:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:54:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:54:17 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 20:54:17 2012] Source does appear to be extended
[Fri Jul 13 20:54:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:58:33 2012] Counts = 6017.990000, rescaling region sizes by 2.000000
[Sat Jul 14 12:58:33 2012] XMMSAS src. selection expression = ellipse(26275.450200, 27767.807600, 2436.588070, 2436.588070, 0.000000, X, Y)
[Sat Jul 14 12:58:33 2012] Writing source region out to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 12:58:33 2012] Extracting stamp from image fullrun_mos1_xmm0008030601_pi300-10000_cl_sm2.00.img.gz, (163, 180) - (443, 460)
[Sat Jul 14 12:58:33 2012] XMMSAS bgd. selection expression = annulus(26275.450200, 27767.807600, 8121.960234, 16243.920467, X, Y) && !ellipse(26431.740000, 29236.588000, 1285.824037, 1285.824037, 0.000000, X, Y) && !ellipse(27531.802000, 26522.474000, 1152.464033, 1152.464033, 0.000000, X, Y) && !ellipse(25804.186000, 28899.120000, 1239.720036, 1239.720036, 0.000000, X, Y) && !ellipse(27640.755402, 29179.676758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26990.963531, 30002.499542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.371277, 25192.818390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.490000, 26991.264000, 1210.344035, 1210.344035, 0.000000, X, Y) && !ellipse(28935.772000, 26062.752000, 1209.584035, 1209.584035, 0.000000, X, Y) && !ellipse(25684.867004, 29966.229187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25449.365906, 25265.393616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24639.412000, 27198.350000, 1162.624033, 1162.624033, 0.000000, X, Y) && !ellipse(26340.645966, 25278.482910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.746887, 25537.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.776978, 25091.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.764099, 30126.149567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29301.518000, 26387.786000, 2418.168070, 2418.168070, 0.000000, X, Y)
[Sat Jul 14 12:58:33 2012] Writing fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 12:58:43 2012] Mean detx,y = (158.61, -396.33) 
[Sat Jul 14 12:58:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:05:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:05:20 2012] Setting source spectrum file to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 13:05:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 16:01:43 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:01:43 2012] Error reading totcts from fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 16:01:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:01:43 2012] Using photon index=1.80, rate=0.784, arf fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 16:01:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:01:43 2012] Updating source flux to 6.5e-12
[Sat Jul 14 16:03:33 2012] Reading fit data from xmm0008030601/analysis//spectral/fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 16:03:33 2012] Spectral fit parameter nH value = 8.40236e+20
[Sat Jul 14 16:03:33 2012] Spectral fit parameter PhoIndex value = 2.08782
[Sat Jul 14 16:03:33 2012] Failed to get F(0.3-8.0) from xmm0008030601/analysis//spectral/fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 16:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:03:33 2012] Using Nh = 8.4e+20, photon index=2.09, rate=0.784, arf fullrun_mos1_xmm0008030601_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 16:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:03:33 2012] Updating source flux to 6.2e-12