[Mon May 6 01:07:32 2013] Detection parameters: Position = (284.8, 338.1) = 16 28 39.91 39 34 17.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 862.3 +/- 39.9 Background counts = 404.6 Rate = 0.1 +/- 0.006 [Mon May 6 01:07:33 2013] Off-axis axis estimate = 3.04' [Mon May 6 01:10:41 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:10:41 2013] Initial guess for spatial extent in simple fitting = 7.95" [Mon May 6 01:10:41 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692 [Mon May 6 01:10:41 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.95" [Mon May 6 04:20:07 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src7.ximg exists [Mon May 6 04:20:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src7.csv [Mon May 6 04:20:07 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src7_1.ximg exists [Mon May 6 04:20:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src7.csv [Mon May 6 04:20:07 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Mon May 6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src7.csv [Mon May 6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Mon May 6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src7.csv [Mon May 6 04:20:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:04:24 2013] Source 7 is offset by -1.776373 and 6.388637 pixels which is larger than 2 X fitted extent = 6.650345 x 3.332556, not incorporating fit results [Mon May 6 08:04:24 2013] Vigneting correction estimate = 1.000000 [Mon May 6 08:04:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 08:04:24 2013] Assessing source extent using major [Mon May 6 08:04:24 2013] Source does appear to be extended [Mon May 6 08:04:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 08:04:47 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Mon May 6 08:04:47 2013] Initial guess for spatial extent in simple fitting = 7.95" [Mon May 6 08:04:47 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692 [Mon May 6 08:04:47 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.95" [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src7.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src7.csv [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src7_1.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src7.csv [Mon May 6 09:46:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src7.csv [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src7.csv [Mon May 6 09:46:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 12:46:10 2013] Source 7 is offset by -1.825543 and 6.379993 pixels which is larger than 2 X fitted extent = 6.636920 x 3.314906, not incorporating fit results [Mon May 6 12:46:10 2013] Vigneting correction estimate = 1.000000 [Mon May 6 12:46:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 12:46:10 2013] Assessing source extent using major [Mon May 6 12:46:10 2013] Source does appear to be extended [Mon May 6 12:46:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 12:46:32 2013] XMMSAS src. selection expression = ellipse(24731.791138, 29364.477417, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing source region out to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7_src.reg [Mon May 6 12:46:32 2013] Extracting stamp from image fullrun_pn_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (247, 301) - (322, 376) [Mon May 6 12:46:32 2013] XMMSAS bgd. selection expression = annulus(24731.791138, 29364.477417, 1087.500000, 2175.000000, X, Y) && !ellipse(25088.935059, 27709.109131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.945618, 28518.999268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.226000, 26166.966000, 2236.736064, 2236.736064, 0.000000, X, Y) && !ellipse(27651.925110, 27705.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.489594, 26489.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26246.272949, 29440.108582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24237.159180, 30037.925598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24543.992950, 30661.902618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.059845, 29163.765167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27445.703674, 28653.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22897.245544, 27608.695923, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7.gif [Mon May 6 12:53:16 2013] Mean detx,y = (1045.58, -1559.13) [Mon May 6 12:53:18 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 12:53:32 2013] Binned source spectrum to 10 counts/bin [Mon May 6 12:53:32 2013] Setting source spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Mon May 6 12:53:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7_bgd.pi.gz [Mon May 6 15:32:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 15:32:04 2013] rmf not generated due to insufficient counts [Mon May 6 17:25:59 2013] Updating aperture counts using extracted products [Mon May 6 17:25:59 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 3295.00 [Mon May 6 17:25:59 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7_bgd.pi.gz = 6519.00 [Mon May 6 17:25:59 2013] Got source and background scale factors 900818.000000, 3162632.000000 [Mon May 6 17:25:59 2013] User source parameters: Position = (284.8, 338.1) = 16 28 39.91 39 34 17.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1438.2 +/- 58.4 Background aperture counts = 1856.8 Rate = 0.3 +/- 0.01 [Mon May 6 17:25:59 2013] Updating counts from extracted products [Mon May 6 17:25:59 2013] Set source signif. to 1438.18/43.09 = 33.38 [Mon May 6 17:26:03 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:26:03 2013] Using photon index=1.80, rate=0.281, arf fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7.arf [Mon May 6 17:26:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:26:03 2013] Updating source flux to 7.8e-13 [Mon May 6 17:26:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 17:26:16 2013] xmm0008030301/analysis//spectral/fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete