[Mon May 6 01:07:32 2013] Detection parameters: Position = (291.4, 295.2) = 16 28 37.43 39 31 18.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 504.4 +/- 40.0 Background counts = 345.6 Rate = 0.07 +/- 0.005 [Mon May 6 01:07:33 2013] Off-axis axis estimate = 0.56' [Mon May 6 01:10:41 2013] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:10:41 2013] Initial guess for spatial extent in simple fitting = 6.71" [Mon May 6 01:10:41 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959 [Mon May 6 01:10:41 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 6.71" [Mon May 6 04:20:07 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src6.ximg exists [Mon May 6 04:20:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src6.csv [Mon May 6 04:20:07 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src6_1.ximg exists [Mon May 6 04:20:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src6.csv [Mon May 6 04:20:07 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Mon May 6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src6.csv [Mon May 6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Mon May 6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src6.csv [Mon May 6 04:20:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:04:24 2013] Source 6 is offset by -2.529743 and 4.205247 pixels which is larger than 2 X fitted extent = 1.129007 x 3.532446, not incorporating fit results [Mon May 6 08:04:24 2013] Source 6 is offset by -3.247559 and 3.987615 pixels which is larger than 2 X fitted extent = 3.874253 x 2.067499, not incorporating fit results [Mon May 6 08:04:24 2013] Vigneting correction estimate = 1.000000 [Mon May 6 08:04:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 08:04:24 2013] Assessing source extent using major [Mon May 6 08:04:24 2013] Source does appear to be extended [Mon May 6 08:04:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 08:04:24 2013] Source is confused with source 4 [Mon May 6 08:04:47 2013] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting [Mon May 6 08:04:47 2013] Initial guess for spatial extent in simple fitting = 6.71" [Mon May 6 08:04:47 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959 [Mon May 6 08:04:47 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 6.71" [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src6.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src6.csv [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src6_1.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src6.csv [Mon May 6 09:46:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src6.csv [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src6.csv [Mon May 6 09:46:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 12:46:10 2013] Source 6 is offset by 1.784356 and -7.010546 pixels which is larger than 2 X fitted extent = 2.665140 x 2.665140, not incorporating fit results [Mon May 6 12:46:10 2013] Source 6 is offset by -3.247559 and 3.641638 pixels which is larger than 2 X fitted extent = 3.564754 x 3.564754, not incorporating fit results [Mon May 6 12:46:10 2013] Source 6 is offset by 2.098648 and 2.557201 pixels which is larger than 2 X fitted extent = 1.386110 x 0.855779, not incorporating fit results [Mon May 6 12:46:10 2013] Vigneting correction estimate = 1.000000 [Mon May 6 12:46:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 12:46:10 2013] Assessing source extent using major [Mon May 6 12:46:10 2013] Source does appear to be extended [Mon May 6 12:46:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 12:46:32 2013] XMMSAS src. selection expression = ellipse(25303.554352, 25630.372528, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing source region out to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6_src.reg [Mon May 6 12:46:32 2013] Extracting stamp from image fullrun_pn_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (254, 258) - (329, 333) [Mon May 6 12:46:32 2013] XMMSAS bgd. selection expression = annulus(25303.554352, 25630.372528, 1087.500000, 2175.000000, X, Y) && !ellipse(25088.935059, 27709.109131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.945618, 28518.999268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.076721, 26057.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.226000, 26166.966000, 2236.736064, 2236.736064, 0.000000, X, Y) && !ellipse(26415.063782, 25969.154266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.925110, 27705.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.489594, 26489.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23702.473450, 25762.659363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.807037, 24793.618805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26688.450000, 25153.550000, 1118.368032, 1118.368032, 0.000000, X, Y) && !ellipse(27445.703674, 28653.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22897.245544, 27608.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.209290, 27175.121674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.649353, 25446.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23992.458405, 25323.262634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.052887, 24849.331940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.672791, 24587.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.118439, 25003.376740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.379242, 24502.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.790924, 24146.689056, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6.gif [Mon May 6 12:52:51 2013] Mean detx,y = (-1541.20, 1122.26) [Mon May 6 12:52:53 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 12:53:08 2013] Binned source spectrum to 10 counts/bin [Mon May 6 12:53:08 2013] Setting source spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Mon May 6 12:53:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6_bgd.pi.gz [Mon May 6 15:31:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 15:31:57 2013] rmf not generated due to insufficient counts [Mon May 6 17:25:59 2013] Updating aperture counts using extracted products [Mon May 6 17:25:59 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 3847.00 [Mon May 6 17:25:59 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1080.00 [Mon May 6 17:25:59 2013] Got source and background scale factors 1158802.000000, 395839.000000 [Mon May 6 17:25:59 2013] User source parameters: Position = (291.4, 295.2) = 16 28 37.43 39 31 18.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 685.3 +/- 63.0 Background aperture counts = 3161.7 Rate = 0.1 +/- 0.01 [Mon May 6 17:25:59 2013] Updating counts from extracted products [Mon May 6 17:25:59 2013] Set source signif. to 685.35/56.23 = 12.19 [Mon May 6 17:26:03 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:26:03 2013] Using photon index=1.80, rate=0.134, arf fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6.arf [Mon May 6 17:26:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:26:03 2013] Updating source flux to 4.1e-13 [Mon May 6 17:26:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 17:26:16 2013] xmm0008030301/analysis//spectral/fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete