[Mon May  6 01:07:33 2013] Detection parameters:
  Position = (283.0, 288.0) = 16 28 40.60 39 30 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.4 +/- 25.8
  Background counts = 293.7
  Rate = 0.03 +/- 0.004

[Mon May  6 01:07:33 2013] Off-axis axis estimate = 1.35'
[Mon May  6 01:10:41 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:10:41 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Mon May  6 01:10:41 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Mon May  6 01:10:41 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.11"
[Mon May  6 04:20:08 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src39.ximg exists
[Mon May  6 04:20:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src39.csv
[Mon May  6 04:20:08 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon May  6 04:20:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src39.csv
[Mon May  6 04:20:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon May  6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Mon May  6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon May  6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Mon May  6 04:20:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 08:04:24 2013] Warning, spatial fit 39 centroid is now closest to src. 38
[Mon May  6 08:04:24 2013] Vigneting correction estimate = 1.000000
[Mon May  6 08:04:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 08:04:24 2013] Assessing source extent using major
[Mon May  6 08:04:24 2013] Source does appear to be extended
[Mon May  6 08:04:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 08:04:24 2013] Source is confused with source 38
[Mon May  6 08:04:47 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Mon May  6 08:04:47 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Mon May  6 08:04:47 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Mon May  6 08:04:47 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 7.11"
[Mon May  6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src33.ximg exists
[Mon May  6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src33.csv
[Mon May  6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon May  6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src33.csv
[Mon May  6 09:46:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 09:46:58 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon May  6 09:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon May  6 09:46:58 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon May  6 09:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon May  6 09:46:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:46:10 2013] Warning, spatial fit 33 centroid is now closest to src. 6
[Mon May  6 12:46:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 12:46:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 12:46:10 2013] Assessing source extent using major
[Mon May  6 12:46:10 2013] Source does appear to be extended
[Mon May  6 12:46:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 12:46:33 2013] XMMSAS src. selection expression = ellipse(24570.118439, 25003.376740, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  6 12:46:33 2013] Writing source region out to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39_src.reg
[Mon May  6 12:46:33 2013] Extracting stamp from image fullrun_pn_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (245, 250) - (320, 325)
[Mon May  6 12:46:33 2013] XMMSAS bgd. selection expression = annulus(24570.118439, 25003.376740, 1087.500000, 2175.000000, X, Y) && !ellipse(25088.935059, 27709.109131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.076721, 26057.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.226000, 26166.966000, 2236.736064, 2236.736064, 0.000000, X, Y) && !ellipse(26415.063782, 25969.154266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.554352, 25630.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.489594, 26489.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23702.473450, 25762.659363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.807037, 24793.618805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26688.450000, 25153.550000, 1118.368032, 1118.368032, 0.000000, X, Y) && !ellipse(22897.245544, 27608.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23992.458405, 25323.262634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.672791, 24587.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.379242, 24502.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.790924, 24146.689056, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 12:46:33 2013] Writing fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39.gif
[Mon May  6 13:02:26 2013] Mean detx,y = (-2660.72, 922.39) 
[Mon May  6 13:02:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 13:02:44 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 13:02:44 2013] Setting source spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May  6 13:02:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon May  6 15:51:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  6 15:51:16 2013] rmf not generated due to insufficient counts
[Mon May  6 17:26:03 2013] Updating aperture counts using extracted products
[Mon May  6 17:26:03 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 1866.00
[Mon May  6 17:26:03 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39_bgd.pi.gz = 2900.00
[Mon May  6 17:26:03 2013] Got source and background scale factors 1053194.000000, 2940803.000000
[Mon May  6 17:26:03 2013] User source parameters:
  Position = (283.0, 288.0) = 16 28 40.60 39 30 51.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 827.4 +/- 44.2
  Background aperture counts = 1038.6
  Rate = 0.2 +/- 0.009

[Mon May  6 17:26:03 2013] Updating counts from extracted products
[Mon May  6 17:26:03 2013] Set source signif. to 827.42/32.23 = 25.67
[Mon May  6 17:26:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 17:26:03 2013] Using photon index=1.80, rate=0.162, arf fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39.arf
[Mon May  6 17:26:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 17:26:03 2013] Updating source flux to 5.3e-13
[Mon May  6 17:26:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  6 17:26:16 2013] xmm0008030301/analysis//spectral/fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete