[Mon May 6 01:07:31 2013] Detection parameters: Position = (279.3, 328.4) = 16 28 42.00 39 33 38.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1233.3 +/- 49.4 Background counts = 425.1 Rate = 0.2 +/- 0.008 [Mon May 6 01:07:33 2013] Off-axis axis estimate = 2.58' [Mon May 6 01:10:41 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:10:41 2013] Initial guess for spatial extent in simple fitting = 7.72" [Mon May 6 01:10:41 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.015 [Mon May 6 01:10:41 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.72" [Mon May 6 04:20:07 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src2.ximg exists [Mon May 6 04:20:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src2.csv [Mon May 6 04:20:07 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src2_1.ximg exists [Mon May 6 04:20:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src2.csv [Mon May 6 04:20:07 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 04:20:08 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Mon May 6 04:20:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.csv [Mon May 6 04:20:08 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Mon May 6 04:20:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.csv [Mon May 6 04:20:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:04:24 2013] Source 2 is offset by -3.074004 and 1.694061 pixels which is larger than 2 X fitted extent = 0.833499 x 0.833499, not incorporating fit results [Mon May 6 08:04:24 2013] Source 2 is offset by 7.354111 and -4.837595 pixels which is larger than 2 X fitted extent = 7.096138 x 7.096138, not incorporating fit results [Mon May 6 08:04:24 2013] Vigneting correction estimate = 1.000000 [Mon May 6 08:04:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 08:04:24 2013] Assessing source extent using major [Mon May 6 08:04:24 2013] Source does appear to be extended [Mon May 6 08:04:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 08:04:47 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting [Mon May 6 08:04:47 2013] Initial guess for spatial extent in simple fitting = 7.72" [Mon May 6 08:04:47 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.015 [Mon May 6 08:04:47 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.72" [Mon May 6 09:46:56 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src2.ximg exists [Mon May 6 09:46:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src2.csv [Mon May 6 09:46:56 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src2_1.ximg exists [Mon May 6 09:46:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src2.csv [Mon May 6 09:46:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.csv [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.csv [Mon May 6 09:46:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 12:46:10 2013] Source 2 is offset by -3.074004 and 1.694061 pixels which is larger than 2 X fitted extent = 0.833499 x 0.833499, not incorporating fit results [Mon May 6 12:46:10 2013] Warning, spatial fit 2 centroid is now closest to src. 1 [Mon May 6 12:46:10 2013] Vigneting correction estimate = 1.000000 [Mon May 6 12:46:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 12:46:10 2013] Assessing source extent using major [Mon May 6 12:46:10 2013] Source does appear to be extended [Mon May 6 12:46:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 12:46:32 2013] Counts = 1233.313232, rescaling region sizes by 2.000000 [Mon May 6 12:46:32 2013] XMMSAS src. selection expression = ellipse(24246.945618, 28518.999268, 1305.000000, 1305.000000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing source region out to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2_src.reg [Mon May 6 12:46:32 2013] Extracting stamp from image fullrun_pn_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (204, 253) - (354, 403) [Mon May 6 12:46:32 2013] XMMSAS bgd. selection expression = annulus(24246.945618, 28518.999268, 4350.000000, 8700.000000, X, Y) && !ellipse(25088.935059, 27709.109131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.076721, 26057.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.226000, 26166.966000, 2236.736064, 2236.736064, 0.000000, X, Y) && !ellipse(26415.063782, 25969.154266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.554352, 25630.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24731.791138, 29364.477417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.708000, 28735.316000, 432.364812, 432.364812, 0.000000, X, Y) && !ellipse(27651.925110, 27705.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.489594, 26489.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23702.473450, 25762.659363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.807037, 24793.618805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26688.450000, 25153.550000, 1118.368032, 1118.368032, 0.000000, X, Y) && !ellipse(26246.272949, 29440.108582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18506.971405, 27278.811188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24237.159180, 30037.925598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24543.992950, 30661.902618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.059845, 29163.765167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27445.703674, 28653.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28643.429871, 28731.598083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22897.245544, 27608.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28562.491302, 27620.784271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.209290, 27175.121674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28655.223511, 26663.733826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29138.482000, 26268.390000, 1191.616034, 1191.616034, 0.000000, X, Y) && !ellipse(27744.649353, 25446.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23992.458405, 25323.262634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28490.364777, 25009.156738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.052887, 24849.331940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.672791, 24587.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.118439, 25003.376740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.379242, 24502.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.790924, 24146.689056, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2.gif [Mon May 6 12:49:11 2013] Mean detx,y = (6.50, -1046.95) [Mon May 6 12:49:14 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 12:50:59 2013] Binned source spectrum to 10 counts/bin [Mon May 6 12:51:00 2013] Setting source spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Mon May 6 12:51:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2_bgd.pi.gz [Mon May 6 13:38:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 13:38:08 2013] rmf not generated due to insufficient counts [Mon May 6 17:25:59 2013] Updating aperture counts using extracted products [Mon May 6 17:25:59 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 26335.00 [Mon May 6 17:25:59 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 52757.00 [Mon May 6 17:25:59 2013] Got source and background scale factors 4416923.000000, 144141492.000000 [Mon May 6 17:25:59 2013] User source parameters: Position = (279.3, 328.4) = 16 28 42.00 39 33 38.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 24718.4 +/- 163.3 Background aperture counts = 1616.6 Rate = 5 +/- 0.03 [Mon May 6 17:25:59 2013] Updating counts from extracted products [Mon May 6 17:25:59 2013] Set source signif. to 24718.37/40.21 = 614.77 [Mon May 6 17:26:03 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:26:03 2013] Using photon index=1.80, rate=4.84, arf fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2.arf [Mon May 6 17:26:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:26:03 2013] Updating source flux to 1.3e-11 [Mon May 6 17:26:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 17:26:16 2013] xmm0008030301/analysis//spectral/fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete