[Mon May 6 01:07:32 2013] Detection parameters: Position = (273.0, 296.7) = 16 28 44.35 39 31 34.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 164.9 +/- 21.1 Background counts = 316.2 Rate = 0.02 +/- 0.002 [Mon May 6 01:07:33 2013] Off-axis axis estimate = 1.85' [Mon May 6 01:10:41 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:10:41 2013] Initial guess for spatial extent in simple fitting = 7.35" [Mon May 6 01:10:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.938 [Mon May 6 01:10:41 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.35" [Mon May 6 04:20:08 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src11.ximg exists [Mon May 6 04:20:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src11.csv [Mon May 6 04:20:08 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src11_1.ximg exists [Mon May 6 04:20:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src11.csv [Mon May 6 04:20:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Mon May 6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src11.csv [Mon May 6 04:20:09 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Mon May 6 04:20:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src11.csv [Mon May 6 04:20:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:04:24 2013] Source 11 is offset by -6.755845 and -5.718191 pixels which is larger than 2 X fitted extent = 6.761242 x 3.194317, not incorporating fit results [Mon May 6 08:04:24 2013] Vigneting correction estimate = 1.000000 [Mon May 6 08:04:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 08:04:24 2013] Assessing source extent using major [Mon May 6 08:04:24 2013] Source does appear to be extended [Mon May 6 08:04:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 08:04:24 2013] Source is confused with source 35 [Mon May 6 08:04:47 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Mon May 6 08:04:47 2013] Initial guess for spatial extent in simple fitting = 7.35" [Mon May 6 08:04:47 2013] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.938 [Mon May 6 08:04:47 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.35" [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src11.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src11.csv [Mon May 6 09:46:57 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src11_1.ximg exists [Mon May 6 09:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src11.csv [Mon May 6 09:46:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 09:46:58 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Mon May 6 09:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src11.csv [Mon May 6 09:46:58 2013] fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Mon May 6 09:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src11.csv [Mon May 6 09:46:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 12:46:10 2013] Source 11 is offset by 6.760936 and 5.738154 pixels which is larger than 2 X fitted extent = 4.467094 x 6.761242, not incorporating fit results [Mon May 6 12:46:10 2013] Vigneting correction estimate = 1.000000 [Mon May 6 12:46:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 12:46:10 2013] Assessing source extent using major [Mon May 6 12:46:10 2013] Source does appear to be extended [Mon May 6 12:46:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 12:46:32 2013] XMMSAS src. selection expression = ellipse(23702.473450, 25762.659363, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing source region out to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11_src.reg [Mon May 6 12:46:32 2013] Extracting stamp from image fullrun_pn_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (235, 259) - (310, 334) [Mon May 6 12:46:32 2013] XMMSAS bgd. selection expression = annulus(23702.473450, 25762.659363, 1087.500000, 2175.000000, X, Y) && !ellipse(25088.935059, 27709.109131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.945618, 28518.999268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.226000, 26166.966000, 2236.736064, 2236.736064, 0.000000, X, Y) && !ellipse(26415.063782, 25969.154266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.554352, 25630.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.807037, 24793.618805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26688.450000, 25153.550000, 1118.368032, 1118.368032, 0.000000, X, Y) && !ellipse(22897.245544, 27608.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23992.458405, 25323.262634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.672791, 24587.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.118439, 25003.376740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.790924, 24146.689056, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 12:46:32 2013] Writing fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11.gif [Mon May 6 12:54:34 2013] Mean detx,y = (-2543.84, -202.15) [Mon May 6 12:54:36 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 12:54:52 2013] Binned source spectrum to 10 counts/bin [Mon May 6 12:54:52 2013] Setting source spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Mon May 6 12:54:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11_bgd.pi.gz [Mon May 6 15:38:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 15:38:42 2013] rmf not generated due to insufficient counts [Mon May 6 17:26:00 2013] Updating aperture counts using extracted products [Mon May 6 17:26:00 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 1863.00 [Mon May 6 17:26:00 2013] Total counts from fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 3391.00 [Mon May 6 17:26:00 2013] Got source and background scale factors 1020794.000000, 3049762.000000 [Mon May 6 17:26:00 2013] User source parameters: Position = (273.0, 296.7) = 16 28 44.35 39 31 34.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 728.0 +/- 44.2 Background aperture counts = 1135.0 Rate = 0.1 +/- 0.009 [Mon May 6 17:26:00 2013] Updating counts from extracted products [Mon May 6 17:26:00 2013] Set source signif. to 727.99/33.69 = 21.61 [Mon May 6 17:26:03 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:26:03 2013] Using photon index=1.80, rate=0.142, arf fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11.arf [Mon May 6 17:26:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:26:03 2013] Updating source flux to 5.3e-13 [Mon May 6 17:26:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 17:26:16 2013] xmm0008030301/analysis//spectral/fullrun_pn_xmm0008030301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete