[Mon May  6 01:08:27 2013] Detection parameters:
  Position = (304.1, 324.3) = 16 28 32.67 39 33 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 552.4 +/- 35.2
  Background counts = 198.8
  Rate = 0.05 +/- 0.003

[Mon May  6 01:08:28 2013] Off-axis axis estimate = 1.92'
[Mon May  6 06:18:29 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon May  6 06:18:29 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Mon May  6 06:18:29 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.673
[Mon May  6 06:18:29 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.39"
[Mon May  6 08:04:11 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src4.ximg exists
[Mon May  6 08:04:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src4.csv
[Mon May  6 08:04:11 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May  6 08:04:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src4.csv
[Mon May  6 08:04:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 08:04:12 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May  6 08:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May  6 08:04:12 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May  6 08:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May  6 08:04:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 08:04:36 2013] Warning, spatial fit 4 centroid is now closest to src. 2
[Mon May  6 08:04:36 2013] Spatial fit model total counts = 2391.830000, observed total counts = 2392.000000
[Mon May  6 08:04:36 2013] Offset between fit and detection position for source 4 = 3.850235 pixels
[Mon May  6 08:04:36 2013] Warning, changing simple spatial fit ID from 4 to 13
[Mon May  6 08:04:36 2013] 2277.071000 total counts/ 2165.680000 bgd. counts: snr = 2.393608
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.850235 pixels
  Position = (307.7, 323.1) = 16 28 31.30 39 33 18.6
  Extent = 15.1 (1.9-28.6)", rotation angle = 0
  Source counts = 111.4 +/- 47.7
  Background counts = 2165.7
  Rate = 0.02 +/- 0.007
[Mon May  6 08:04:36 2013] Vigneting correction estimate = 1.000000
[Mon May  6 08:04:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 08:04:36 2013] Assessing source extent using major axis lower bound
[Mon May  6 08:04:36 2013] Source does appear to be extended
[Mon May  6 08:04:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 08:04:36 2013] Source is confused with source 3
[Mon May  6 08:04:36 2013] Source is confused with source 17
[Mon May  6 11:17:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 11:17:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  6 11:17:36 2013] Initial guess for spatial extent in simple fitting = 15.06"
[Mon May  6 11:17:36 2013] source mask rpix=3.5, npix_max = 62, mask sum = 56, frac = 0.892
[Mon May  6 11:17:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 15.06"
[Mon May  6 12:45:58 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src4.ximg exists
[Mon May  6 12:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src4.csv
[Mon May  6 12:45:58 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May  6 12:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src4.csv
[Mon May  6 12:45:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:45:59 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May  6 12:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May  6 12:45:59 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May  6 12:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May  6 12:45:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:46:23 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.846788 pixels away
[Mon May  6 12:46:23 2013] Vigneting correction estimate = 1.000000
[Mon May  6 12:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 12:46:23 2013] Assessing source extent using major axis lower bound
[Mon May  6 12:46:23 2013] Source does appear to be extended
[Mon May  6 12:46:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 16:47:12 2013] XMMSAS src. selection expression = ellipse(26722.592000, 28057.952000, 903.408026, 903.408026, 0.000000, X, Y)
[Mon May  6 16:47:12 2013] Writing source region out to fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4_src.reg
[Mon May  6 16:47:12 2013] Extracting stamp from image fullrun_mos2_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (256, 271) - (360, 375)
[Mon May  6 16:47:12 2013] XMMSAS bgd. selection expression = annulus(26722.592000, 28057.952000, 1505.680043, 3011.360087, X, Y) && !ellipse(25131.145400, 27720.519000, 1085.576031, 889.616026, 76.477800, X, Y) && !ellipse(25627.244904, 28835.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.363434, 29125.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.530548, 26068.542633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.382000, 26021.954000, 1182.048034, 1182.048034, 0.000000, X, Y) && !ellipse(27411.934357, 27371.301788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24994.158478, 25635.018829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.954620, 25363.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.631805, 28479.840240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.127960, 26277.886383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.536804, 27264.646606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.659729, 26433.043640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25368.838867, 30025.202698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25712.954559, 25193.275055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.736725, 24754.414642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28195.704315, 25547.378967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26632.512000, 28809.740000, 1269.520037, 1269.520037, 0.000000, X, Y) && !ellipse(27550.821594, 24658.599945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27982.274475, 28227.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24730.938873, 24843.297058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29389.502600, 27054.930600, 1277.096037, 707.889620, 347.259800, X, Y)
[Mon May  6 16:47:12 2013] Writing fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4.gif
[Mon May  6 16:51:08 2013] Mean detx,y = (-946.09, -924.15) 
[Mon May  6 16:51:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 16:51:20 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 16:51:20 2013] Setting source spectrum file to fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May  6 16:51:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May  6 17:26:06 2013] Updating aperture counts using extracted products
[Mon May  6 17:26:06 2013] Total counts from fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 4191.00
[Mon May  6 17:26:06 2013] Total counts from fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 7446.00
[Mon May  6 17:26:06 2013] Got source and background scale factors 2324212.000000, 7280344.000000
[Mon May  6 17:26:06 2013] User source parameters:
  Position = (307.7, 323.1) = 16 28 31.30 39 33 18.6
  Extent = 15.1 (1.9-28.6)", rotation angle = 0
  Source aperture counts = 1813.9 +/- 65.7
  Background aperture counts = 2377.1
  Rate = 0.3 +/- 0.01

[Mon May  6 17:26:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 17:26:08 2013] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4.arf
[Mon May  6 17:26:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 17:26:08 2013] Updating source flux to 1.5e-13
[Mon May  6 17:26:12 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Mon May  6 17:26:14 2013] xmm0008030301/analysis//spectral/fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete