[Mon May 6 01:08:27 2013] Detection parameters: Position = (295.1, 332.0) = 16 28 36.03 39 33 56.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 715.2 +/- 39.6 Background counts = 210.7 Rate = 0.06 +/- 0.003 [Mon May 6 01:08:28 2013] Off-axis axis estimate = 2.44' [Mon May 6 06:18:29 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting [Mon May 6 06:18:29 2013] Initial guess for spatial extent in simple fitting = 7.65" [Mon May 6 06:18:29 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784 [Mon May 6 06:18:29 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.65" [Mon May 6 08:04:11 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src2.ximg exists [Mon May 6 08:04:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src2.csv [Mon May 6 08:04:11 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src2_1.ximg exists [Mon May 6 08:04:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src2.csv [Mon May 6 08:04:11 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:04:12 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Mon May 6 08:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.csv [Mon May 6 08:04:12 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Mon May 6 08:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.csv [Mon May 6 08:04:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:04:36 2013] Source 2 is offset by -0.537461 and 5.335525 pixels which is larger than 2 X fitted extent = 0.832621 x 0.832621, not incorporating fit results [Mon May 6 08:04:36 2013] Warning, spatial fit 2 centroid is now closest to src. 1 [Mon May 6 08:04:36 2013] Source 2 is offset by -4.390932 and 3.049019 pixels which is larger than 2 X fitted extent = 1.274230 x 0.849117, not incorporating fit results [Mon May 6 08:04:36 2013] Vigneting correction estimate = 1.000000 [Mon May 6 08:04:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 08:04:36 2013] Assessing source extent using major [Mon May 6 08:04:36 2013] Source does appear to be extended [Mon May 6 08:04:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 11:17:36 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting [Mon May 6 11:17:36 2013] Initial guess for spatial extent in simple fitting = 7.65" [Mon May 6 11:17:36 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784 [Mon May 6 11:17:36 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.65" [Mon May 6 12:45:58 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src2.ximg exists [Mon May 6 12:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src2.csv [Mon May 6 12:45:58 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src2_1.ximg exists [Mon May 6 12:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src2.csv [Mon May 6 12:45:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 12:45:59 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Mon May 6 12:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.csv [Mon May 6 12:45:59 2013] fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Mon May 6 12:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.csv [Mon May 6 12:45:59 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0008030301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 12:46:23 2013] Spatial fit model total counts = 4746.870000, observed total counts = 4178.000000 [Mon May 6 12:46:23 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Mon May 6 12:46:23 2013] Vigneting correction estimate = 1.000000 [Mon May 6 12:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 12:46:23 2013] Assessing source extent using major [Mon May 6 12:46:23 2013] Source does appear to be extended [Mon May 6 12:46:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 16:47:12 2013] XMMSAS src. selection expression = ellipse(25627.244904, 28835.194672, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 16:47:12 2013] Writing source region out to fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2_src.reg [Mon May 6 16:47:12 2013] Extracting stamp from image fullrun_mos2_xmm0008030301_pi300-10000_cl_sm2.00.img.gz, (258, 294) - (333, 369) [Mon May 6 16:47:12 2013] XMMSAS bgd. selection expression = annulus(25627.244904, 28835.194672, 1087.500000, 2175.000000, X, Y) && !ellipse(25131.145400, 27720.519000, 1085.576031, 889.616026, 76.477800, X, Y) && !ellipse(25017.363434, 29125.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26722.592000, 28057.952000, 1204.544035, 1204.544035, 0.000000, X, Y) && !ellipse(24652.530548, 26068.542633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.382000, 26021.954000, 1182.048034, 1182.048034, 0.000000, X, Y) && !ellipse(27411.934357, 27371.301788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.631805, 28479.840240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.127960, 26277.886383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.536804, 27264.646606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.659729, 26433.043640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25368.838867, 30025.202698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22715.479584, 28696.344604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26632.512000, 28809.740000, 1269.520037, 1269.520037, 0.000000, X, Y) && !ellipse(27982.274475, 28227.548737, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 16:47:12 2013] Writing fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2.gif [Mon May 6 16:50:47 2013] Mean detx,y = (-928.67, 346.52) [Mon May 6 16:50:48 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 16:50:53 2013] Binned source spectrum to 10 counts/bin [Mon May 6 16:50:53 2013] Setting source spectrum file to fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Mon May 6 16:50:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2_bgd.pi.gz [Mon May 6 16:59:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 16:59:16 2013] rmf not generated due to insufficient counts [Mon May 6 17:26:06 2013] Updating aperture counts using extracted products [Mon May 6 17:26:06 2013] Total counts from fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2737.00 [Mon May 6 17:26:06 2013] Total counts from fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 5100.00 [Mon May 6 17:26:06 2013] Got source and background scale factors 1167460.000000, 3352560.000000 [Mon May 6 17:26:06 2013] User source parameters: Position = (295.1, 332.0) = 16 28 36.03 39 33 56.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 961.0 +/- 53.3 Background aperture counts = 1776.0 Rate = 0.1 +/- 0.008 [Mon May 6 17:26:06 2013] Updating counts from extracted products [Mon May 6 17:26:06 2013] Set source signif. to 961.03/42.14 = 22.80 [Mon May 6 17:26:08 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:26:08 2013] Using photon index=1.80, rate=0.14, arf fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2.arf [Mon May 6 17:26:08 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:26:08 2013] Updating source flux to 1.4e-12 [Mon May 6 17:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 17:26:14 2013] xmm0008030301/analysis//spectral/fullrun_mos2_xmm0008030301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete