[Mon May  6 01:07:58 2013] Detection parameters:
  Position = (132.8, 428.3) = 16 29 37.20 39 40 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 10.6
  Background counts = 16.3
  Rate = 0.004 +/- 0.0008

[Mon May  6 01:07:59 2013] Off-axis axis estimate = 15.26'
[Mon May  6 04:20:10 2013] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Mon May  6 04:20:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  6 04:20:10 2013] Initial guess for spatial extent in simple fitting = 14.06"
[Mon May  6 04:20:10 2013] source mask rpix=3.2, npix_max = 55, mask sum = 52, frac = 0.933
[Mon May  6 04:20:10 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 14.06"
[Mon May  6 06:18:28 2013] fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_src38.ximg exists
[Mon May  6 06:18:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_src38.csv
[Mon May  6 06:18:28 2013] fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_src38_1.ximg exists
[Mon May  6 06:18:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_src38.csv
[Mon May  6 06:18:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 06:18:29 2013] fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Mon May  6 06:18:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Mon May  6 06:18:29 2013] fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Mon May  6 06:18:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Mon May  6 06:18:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0008030301_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 08:04:24 2013] Warning, spatial fit 30 centroid is now closest to src. 31
[Mon May  6 08:04:31 2013] Warning, spatial fit 18 centroid is now closest to src. 10
[Mon May  6 08:04:31 2013] Spatial fit model total counts = 110.608000, observed total counts = 90.000000
[Mon May  6 08:04:31 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 08:04:31 2013] Vigneting correction estimate = 1.000000
[Mon May  6 08:04:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 08:04:31 2013] Assessing source extent using major
[Mon May  6 08:04:31 2013] Source does appear to be extended
[Mon May  6 08:04:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 08:04:31 2013] Deleting source due to low Poisson probability 0.9