[Sat Jul 28 14:56:10 2012] Detection parameters:
  Position = (408.7, 234.9) = 4 38 31.11 -68 12 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1054.0 +/- 40.3
  Background counts = 40.4
  Rate = 0.07 +/- 0.003

[Sat Jul 28 14:56:11 2012] Off-axis axis estimate = 9.22'
[Sat Jul 28 14:58:02 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 14:58:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 14:58:02 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Sat Jul 28 14:58:02 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Sat Jul 28 14:58:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.04"
[Sat Jul 28 15:08:23 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 15:08:23 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 15:08:23 2012] Fit fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jul 28 15:08:23 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 15:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul 28 15:08:23 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 15:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul 28 15:08:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008020101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 15:16:33 2012] Spatial fit model total counts = 825.384000, observed total counts = 895.000000
[Sat Jul 28 15:16:33 2012] Offset between fit and detection position for source 1 = 0.548435 pixels
[Sat Jul 28 15:16:33 2012] 826.886000 total counts/ 348.148000 bgd. counts: snr = 25.657595
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.548435 pixels
  Position = (408.7, 235.5) = 4 38 31.08 -68 11 59.0
  Extent = 5.9" x 4.6", rotation angle = 289
  Source counts = 478.7 +/- 28.8
  Background counts = 348.1
  Rate = 0.05 +/- 0.003
[Sat Jul 28 15:16:33 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 15:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 15:16:33 2012] Assessing source extent using major
[Sat Jul 28 15:16:33 2012] Source does appear to be extended
[Sat Jul 28 15:16:33 2012] Computing asymmetry using major and minor axis, asym = 1.29
[Sat Jul 28 15:16:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 15:16:39 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Sat Jul 28 15:16:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.775
[Sat Jul 28 15:16:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24"
[Sat Jul 28 15:28:21 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 15:28:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 15:28:21 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 15:28:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 15:28:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 15:28:21 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 15:28:21 2012] fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 15:28:21 2012] Fit fullrun_pn_xmm0008020101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 15:34:02 2012] Spatial fit model total counts = 827.851000, observed total counts = 821.000000
[Sat Jul 28 15:34:02 2012] Offset between fit and detection position for source 1 = 0.696728 pixels
[Sat Jul 28 15:34:02 2012] 831.527000 total counts/ 245.320000 bgd. counts: snr = 37.426957
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.696728 pixels
  Position = (408.4, 234.8) = 4 38 31.28 -68 12 1.8
  Extent = 5.8 (5.4-6.3)", rotation angle = 0
  Source counts = 586.2 +/- 28.8
  Background counts = 245.3
  Rate = 0.06 +/- 0.003
[Sat Jul 28 15:34:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 15:34:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 15:34:02 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 15:34:02 2012] Source does appear to be extended
[Sat Jul 28 15:34:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 15:34:07 2012] XMMSAS src. selection expression = ellipse(35486.555600, 20380.971600, 347.358010, 347.358010, 0.000000, X, Y)
[Sat Jul 28 15:34:07 2012] Writing source region out to fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 28 15:34:07 2012] Extracting stamp from image fullrun_pn_xmm0008020101_pi300-10000_cl_sm2.00.img.gz, (388, 215) - (428, 255)
[Sat Jul 28 15:34:07 2012] XMMSAS bgd. selection expression = annulus(35486.555600, 20380.971600, 578.930017, 1157.860033, X, Y)
[Sat Jul 28 15:34:07 2012] Writing fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1.gif
[Sat Jul 28 15:34:13 2012] Mean detx,y = (-1252.00, -9577.80) 
[Sat Jul 28 15:34:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:34:31 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:34:31 2012] Setting source spectrum file to fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 15:34:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 28 15:46:05 2012] Updating aperture counts using extracted products
[Sat Jul 28 15:46:05 2012] Error reading totcts from fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 15:46:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:46:06 2012] Using photon index=1.80, rate=0.0607, arf fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 15:46:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:46:06 2012] Updating source flux to 3.1e-13
[Thu Aug  2 11:33:23 2012] Reading fit data from xmm0008020101/analysis//spectral/fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  2 11:33:23 2012] Spectral fit parameter nH value = 1.18992e+22
[Thu Aug  2 11:33:23 2012] Spectral fit parameter PhoIndex value = 1.29243
[Thu Aug  2 11:33:23 2012] Failed to get F(0.3-8.0) from xmm0008020101/analysis//spectral/fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 11:33:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 11:33:23 2012] Using Nh = 1.2e+22, photon index=1.29, rate=0.0607, arf fullrun_pn_xmm0008020101_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 11:33:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 11:33:23 2012] Updating source flux to 9.3e-13