[Sun May 12 17:46:55 2013] Detection parameters:
  Position = (247.1, 327.5) = 13 58 26.44 -58 47 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.9 +/- 6.5
  Background counts = 4.2
  Rate = 0.002 +/- 0.0007

[Sun May 12 17:46:55 2013] Off-axis axis estimate = 4.28'
[Sun May 12 18:02:41 2013] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sun May 12 18:02:41 2013] Initial guess for spatial extent in simple fitting = 8.57"
[Sun May 12 18:02:41 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Sun May 12 18:02:41 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.57"
[Sun May 12 18:14:58 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 12 18:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_src8.csv
[Sun May 12 18:14:58 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 12 18:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_src8.csv
[Sun May 12 18:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 18:14:58 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 12 18:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 12 18:14:58 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 12 18:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 12 18:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 18:24:55 2013] Spatial fit model total counts = 40.391400, observed total counts = 45.000000
[Sun May 12 18:24:55 2013] Offset between fit and detection position for source 8 = 0.956858 pixels
[Sun May 12 18:24:55 2013] 38.483500 total counts/ 3.789000 bgd. counts: snr = 17.823719
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.956858 pixels
  Position = (248.0, 327.1) = 13 58 25.95 -58 47 10.3
  Extent = 10.1 (4.9-13.0)", rotation angle = 0
  Source counts = 34.7 +/- 6.2
  Background counts = 3.8
  Rate = 0.003 +/- 0.0005
[Sun May 12 18:24:55 2013] Vigneting correction estimate = 1.000000
[Sun May 12 18:24:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 18:24:55 2013] Assessing source extent using major axis lower bound
[Sun May 12 18:24:55 2013] Source does appear to be extended
[Sun May 12 18:24:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 18:41:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 18:41:18 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sun May 12 18:41:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.044
[Sun May 12 18:41:18 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.06"
[Sun May 12 18:52:47 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_src8.ximg exists
[Sun May 12 18:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_src8.csv
[Sun May 12 18:52:47 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun May 12 18:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_src8.csv
[Sun May 12 18:52:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 18:52:47 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun May 12 18:52:47 2013] fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 12 18:52:47 2013] Fit fullrun_mos1_xmm0007422401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun May 12 19:03:14 2013] Spatial fit model total counts = 41.480000, observed total counts = 45.000000
[Sun May 12 19:03:14 2013] Offset between fit and detection position for source 8 = 0.563844 pixels
[Sun May 12 19:03:14 2013] 42.233290 total counts/ 7.587890 bgd. counts: snr = 12.577232
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.563844 pixels
  Position = (247.4, 327.0) = 13 58 26.27 -58 47 10.7
  Extent = 10.5 (6.5-14.2)", rotation angle = 0
  Source counts = 34.6 +/- 6.5
  Background counts = 7.6
  Rate = 0.003 +/- 0.0005
[Sun May 12 19:03:14 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:03:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:03:14 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:03:14 2013] Source does appear to be extended
[Sun May 12 19:03:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:14:41 2013] XMMSAS src. selection expression = ellipse(21475.873200, 28404.326800, 631.579065, 631.579065, 0.000000, X, Y)
[Sun May 12 19:14:41 2013] Writing source region out to fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8_src.reg
[Sun May 12 19:14:41 2013] Extracting stamp from image fullrun_mos1_xmm0007422401_pi300-10000_cl_sm2.00.img.gz, (211, 291) - (284, 363)
[Sun May 12 19:14:41 2013] XMMSAS bgd. selection expression = annulus(21475.873200, 28404.326800, 1052.631774, 2105.263549, X, Y) && !ellipse(22413.329285, 30978.992767, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 19:14:41 2013] Writing fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8.gif
[Sun May 12 19:16:46 2013] Mean detx,y = (-5929.46, 826.97) 
[Sun May 12 19:16:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 19:17:03 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 19:17:03 2013] Setting source spectrum file to fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun May 12 19:17:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun May 12 19:17:57 2013] Not generating rmf since there are only 34 counts
[Sun May 12 19:17:57 2013] rmf not generated due to insufficient counts
[Sun May 12 19:23:51 2013] Updating aperture counts using extracted products
[Sun May 12 19:23:51 2013] Total counts from fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 39.00
[Sun May 12 19:23:51 2013] Total counts from fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8_bgd.pi.gz = 195.00
[Sun May 12 19:23:52 2013] Got source and background scale factors 1130698.000000, 9719290.000000
[Sun May 12 19:23:52 2013] User source parameters:
  Position = (247.4, 327.0) = 13 58 26.27 -58 47 10.7
  Extent = 10.5 (6.5-14.2)", rotation angle = 0
  Source aperture counts = 16.3 +/- 7.3
  Background aperture counts = 22.7
  Rate = 0.001 +/- 0.0006

[Sun May 12 19:23:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 19:23:52 2013] Using photon index=1.80, rate=0.00282, arf fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8.arf
[Sun May 12 19:23:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 19:23:52 2013] Updating source flux to 5.1e-14
[Sun May 12 19:23:54 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 19:23:55 2013] xmm0007422401/analysis//spectral/fullrun_mos1_xmm0007422401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete