[Tue Aug  7 10:17:51 2012] Detection parameters:
  Position = (410.9, 276.8) = 13 56 8.66 -59 18 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 330.2 +/- 22.1
  Background counts = 11.2
  Rate = 0.03 +/- 0.002

[Tue Aug  7 10:17:51 2012] Off-axis axis estimate = 8.30'
[Tue Aug  7 10:20:00 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 10:20:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 10:20:00 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Tue Aug  7 10:20:00 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Tue Aug  7 10:20:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.58"
[Tue Aug  7 10:43:09 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 10:43:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 10:43:09 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 10:43:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 10:43:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 10:43:09 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 10:43:09 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 10:43:09 2012] Fit fullrun_pn_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 11:32:25 2012] Spatial fit model total counts = 481.992000, observed total counts = 475.000000
[Tue Aug  7 11:32:25 2012] Offset between fit and detection position for source 1 = 0.297489 pixels
[Tue Aug  7 11:32:25 2012] 483.765000 total counts/ 245.984000 bgd. counts: snr = 15.160856
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.297489 pixels
  Position = (410.7, 276.5) = 13 56 8.78 -59 18 12.3
  Extent = 5.8 (5.1-6.7)", rotation angle = 0
  Source counts = 237.8 +/- 22.0
  Background counts = 246.0
  Rate = 0.02 +/- 0.002
[Tue Aug  7 11:32:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:32:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:32:25 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:32:25 2012] Source does appear to be extended
[Tue Aug  7 11:32:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 11:32:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:32:44 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Tue Aug  7 11:32:44 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.884
[Tue Aug  7 11:32:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Tue Aug  7 11:59:03 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug  7 11:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 11:59:03 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug  7 11:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 11:59:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:59:04 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug  7 11:59:04 2012] fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug  7 11:59:04 2012] Fit fullrun_pn_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug  7 12:41:13 2012] Spatial fit model total counts = 418.657000, observed total counts = 417.000000
[Tue Aug  7 12:41:13 2012] Offset between fit and detection position for source 1 = 0.023227 pixels
[Tue Aug  7 12:41:13 2012] 415.670000 total counts/ 181.017000 bgd. counts: snr = 17.440801
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023227 pixels
  Position = (410.7, 276.6) = 13 56 8.77 -59 18 12.2
  Extent = 5.7 (5.0-6.7)", rotation angle = 0
  Source counts = 234.7 +/- 20.4
  Background counts = 181.0
  Rate = 0.02 +/- 0.002
[Tue Aug  7 12:41:13 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:41:13 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 12:41:13 2012] Source does appear to be extended
[Tue Aug  7 12:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:41:31 2012] XMMSAS src. selection expression = ellipse(35681.473800, 24012.271800, 343.882810, 343.882810, 0.000000, X, Y)
[Tue Aug  7 12:41:31 2012] Writing source region out to fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug  7 12:41:31 2012] Extracting stamp from image fullrun_pn_xmm0007422301_pi300-10000_cl_sm2.00.img.gz, (391, 257) - (430, 296)
[Tue Aug  7 12:41:31 2012] XMMSAS bgd. selection expression = annulus(35681.473800, 24012.271800, 573.138016, 1146.276033, X, Y)
[Tue Aug  7 12:41:31 2012] Writing fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1.gif
[Tue Aug  7 12:41:44 2012] Mean detx,y = (-8845.18, -4720.55) 
[Tue Aug  7 12:41:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 12:42:11 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 12:42:12 2012] Setting source spectrum file to fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 12:42:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug  7 13:10:21 2012] Updating aperture counts using extracted products
[Tue Aug  7 13:10:21 2012] Error reading totcts from fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 13:10:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:10:21 2012] Using photon index=1.80, rate=0.0186, arf fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 13:10:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:10:21 2012] Updating source flux to 1.1e-13
[Tue Aug  7 13:10:45 2012] Reading fit data from xmm0007422301/analysis//spectral/fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug  7 13:10:45 2012] Spectral fit parameter nH value = 3.60254e+21
[Tue Aug  7 13:10:45 2012] Spectral fit parameter PhoIndex value = 3.20182
[Tue Aug  7 13:10:45 2012] Failed to get F(0.3-8.0) from xmm0007422301/analysis//spectral/fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 13:10:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:10:45 2012] Using Nh = 3.6e+21, photon index=3.20, rate=0.0186, arf fullrun_pn_xmm0007422301_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 13:10:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:10:45 2012] Updating source flux to 9.8e-14